1-Wire Distributor, Star Topology/Cabling with Push-In Connector, 1-Wire Extender 7

The EC 1 central unit is designed for the autonomous management of a 1-Wire network. The user does not have to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators). The central processing unit evaluates the sensor and actuator data internally and outputs it cyclically (1-2 sec.) in plain text once converted (e.g. for temperature sensors in C°). In addition, the article number for ESERA modules can be entered; the calculation and output are adapted to the function of the module A wide range of sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm contacts, glass breakage and smoke detectors The 1-Wire interface of the sensor gateway of the EC 1 central unit is designed so that both small and large 1-Wire networks with long cable runs can be set up safely. The 1-Wire sensors can be operated simultaneously in mixed parasitic* or normal mode. The currently most powerful 1-Wire interface for maximum data security has also been installed for complex network structures. The EC 1 Smart Home sensor gateway has a wide-range input of 9 - 30VDC for the power supply. It is therefore equally suitable for 12VDC and the industry-typical 24VDC supply voltages. Accessories such as top-hat rails and plug-in power supply units: see homepage. HIGHLIGTHS Low-cost entry-level module with functionalities of the professional ECO gateway central units Intuitive operation via web server functionality Data interface for Modbus/TCP, MQTT and ASCII LAN interface for data, configuration, debug and firmware updates ESERA-patented Auto-E-Connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming. Customizations and branding possible

1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

The ECO 531 central device/gateway is a modern system bus interface for the comprehensive monitoring and control of systems. It integrates up to 30 sensors and actuators via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. The ECO central units are low-maintenance industrial devices that have been the standard for 1-Wire bus systems for over 10 years, offer stability and meet a high "security by design" standard. The gateway can be controlled in parallel by PLC controllers, cloud applications and text protocols through BMS and media control systems. The simple installation of complex networks is facilitated by the integrated 1-Wire Zone feature. ESERA offers a wide range of sensors and actuators for the gateway. User-friendliness is reflected in the intuitive and simple configuration, software updates and provision of data via the web server, accessible via LAN or the access point that can be activated at the touch of a button. HIGHLIGHTS Three 1-wire bus zones, fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -20°C to 50°C Applications Suitable for complex 1-wire networks: Industrial plants Mechanical engineering Building management, IoT and M2M, silo monitoring Energy optimization in many application areas, can be used regardless of manufacturer Optional equipment Ultrafast iButton or RFID Read function for access or security authentication TPM (Trusted Platform Module) hardware for secure boot and SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

The ECO 501 central unit is a powerful industrial 1-wire sensor gateway of the latest generation for plant and system monitoring. The gateway has an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically via the 1-Wire bus using the Auto-E-Connect plug-and-play system. A wide range of measurement sensors are available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), as well as glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server, which can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown librariesDevice security through secure boot and updates with encrypted SSL certificate Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization an branding possible

The ECO 502 central processing unit is a powerful industrial 1-Wire sensor gateway of the latest generation for plant and system system monitoring. The gateway is equipped with an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically to the 1-Wire bus via the Auto-E-Connect plug-and-play system. A wide range of measurement sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), additionally for glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device, without Linux and with its own native programming. was implemented. No unknown libraries are used, which ensures the stability stability and reliability of the system. The WLAN and LAN interface can be used for communication with up to 3 data connections via Modbus/TCP, MQTT, ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -5°C to 50°C Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

The ECO 503 Pro central unit, Industrial Ethernet/LAN switching actuator can be used as an IT switching actuator, IoT cloud switching module and industrial LAN relay module. The switching actuator offers a high switching capacity of 8x16A* and can therefore control complete luminous flux circuits, larger machine or luminaire groups (without dimmers). The integrated high-performance relays can be controlled either by software commands or by 8 digital inputs. The digital inputs are designed for operation with a low voltage of 10-30 VDC and are optimized for push-button operation. The ECO503 central unit supports 4 data protocols: Modbus/TCP, ASCII text, MQTT (with optional SSL encryption). These protocols can communicate in parallel on up to 4 data channels. The device has a web server for switching, configuration and firmware updates. The web server can be accessed via LAN or the access point (activated at the touch of a button). The ECO 503 switching actuator was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which ensures the stability and reliability of the system. Extensive free software support is available. The ECO 503 Pro central processing unit offers a wide range of possible uses and can be seamlessly integrated into various control and automation technology applications. *Note: The specification "8x16A" means that the switching actuator has a total of 8 outputs, each of which can switch a maximum current of 16 amps. HIGHLIGHTS 8 High-performance switching channels (up to 10/16A* switching current), 8 digital inputs for direct control of the switching channels Web server and LAN interface/access point for data, configuration, debug and firmware updates Multi-protocol capable: HTML, Modbus/TCP, MQTT and ASCII Robust and low-maintenance industrial design, can be used for the extended temperature range from -5°C to 50°C regardless of manufacturer Native programming: without Linux and without unknown libraries Cost savings thanks to simple installation and fast commissioning Applications Industrial plant and machinery Smart Building IoT and M2M applications Energy optimization for all consumers, rooms and buildings through central control Switching/control of loads up to 16Amp switching current (switching channels are separately fused) Optional equipment Personalization and branding possible Basis for extensions, e.g. more channels, analog in/out, energy detection, etc.

The ECO 608 industrial IoT/IIoT central unit is a secure, high-performance sensor gateway of the latest generation, designed for monitoring critical plants, systems and infrastructures. The ECO 608 is an intelligent and fully automated gateway to your system. The direct option of secure data transmission to platforms such as Microsoft Azure IoT or SAP IoT using MQTT SSL ensures efficient communication* The central unit defends itself against hacker attacks (Dos/DDoS attacks) with the help of its high-performance LAN interface*. ESERA's patented plug-and-play system (Auto-E-Connect) enables the automatic connection of up to 30 sensors. A wide range of sensors is available for this device. In addition to the sensor bus interface, the ECO 608 Gateway offers 8 digital inputs for monitoring doors, windows or other devices with alarm signal output. Maximum adaptability is made possible by the configuration options via the web server. The internal access point is activated for 30 minutes simply by pressing a button. Flexibility and adaptability are the hallmarks of the ECO 608 industrial IoT/IIoT security central unit. The ECO 608 gateway also has an output for alarm messages or for controlling electrical loads. In combination with the integrated climate management, heating and ventilation systems can be controlled. *Only on an NDA and project basis HIGHLIGHTS Security sensor gateway with secure boot and SSL-encrypted updates LAN MQTT and SSL Modbus/TCP interface for up to 7 data connections 8x Digital-Input,1x Digital-Output WLAN, web server and access point for configuration, debugging and firmware updates ESERA-patented plug-and-play interface for up to 30 sensors Robust industrial design with integrated climate management and extended temperature range Applications Control cabinet temperature monitoring Environmental and climate monitoring, leakage detection Data Center Monitoring of production systems, machines and plants Cold and heat chains in the food industry Vehicle monitoring: cargo space, localization Monitoring of cold stores and warehouses