PLUG and PLAY
USER FRIENDLY
SECURE
DURABLE
ECO FRIENDLY
Filter
Shipping until
1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Adapter 2, RJ45 to screw terminal
The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors. The adapter has a RJ45 connector on one side and a Push In terminal for ground, 5V, 12V and 1-Wire data on the other side. It is no longer necessary to remove the existing network connectors. The pin assignment of the RJ45 socket is matched to our 1-Wire Hub RJ45.

From €8.01*

Product number: 11124

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 1 RJ45 passive
Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling. Connections 6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel) Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller Assembly top-hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions

From €28.71*

Product number: 11140

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor LIN 6 with grounding system
1-Wire distributor LIN 6 for cabling of 1-Wire sensors in linear topology with EMC system or shielding.6 inputs / outputs on push-in connectors plus ground connection / functional grounding.Distribution module for easy cabling in linear bus topology of 1-Wire sensors in industrial and data center environment. Designed for cabling CAT5, CAT6 cables or system cables with 5 Aden plus shield. This allows a fast and cost sensitive cabling. Due to the use of Push In clamps you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can quickly and easily connect several 1-Wire distributors 6 LIN with each other linearly via system cable.The distributor complements the existing 1-Wire cabling system based on ESERA system cables.*Push In connectors are screwless clamp connections.

From €38.69*

Product number: 11164

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Distributor, Star Topology/Cabling with Push-In Connector, 1-Wire Extender 7
1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy 6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it. Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.

From €38.69*

Product number: 11166

Instantly available
Shipping until , if you place your order within the next .
Shipping until
DS18B20 1-Wire Temp Sensor
DS18B20, 1-Wire Temperature Sensor Temperature sensor with high accuracyTemperature range: -55 - +125°CSupply voltage:      3 - 5.5VHousing: TO 92Accuracy: ±0.5°C from -10°C to +85°CHint: We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €4.41*

Product number: 42000

Instantly available
Shipping until , if you place your order within the next .
in production
DS2401 1-Wire Serial Chip
DS2401+, 1-Wire Serial Number Module DS2401 Silicone Serial Number Function: Serial number module for 1-Wire bus Housing: TO92 Supply voltage: 2.8V to 5.5V For further data please refer to the data sheet (Download) Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.  

From €1.71*

Product number: 42001

Currently not available, please sign up to get notified

Shipping until
DS2406 1-Wire Dual Addressable Switch Plus 1Kb Memory
DS2406+, 1-Wire Dual Switch with 1K memory DS2406 Dual Addressable Switch Plus 1Kb Memory Function: 1 channel I/O module for 1-Wire bus Housing: TO92 Supply voltage: 2.8V to 5.5V Switching voltage/current max. 13V, max. 0.1A For further data please refer to the data sheet Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €5.31*

Product number: 42002

Instantly available
Shipping until , if you place your order within the next .
in production
DS2408S+ 1-Wire 8-Fach Digital I/O Chip
DS2408, 1-wire 8-fold digital I/O module Dallas Addressable 8-Port Switch, switching module for 8-fold digital input or digital outputTemperature range: -40°C to +85°C Supply voltage: 2.8V to 5.25VType: DS2408S+ Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €8.01*

Product number: 42003

Currently not available, please sign up to get notified

Shipping until
DS2413 1-Wire Dual I/O Chip
1-Wire Dual Digital I/O Chip Actuator for 2 channel digital input or output Temperature range: -55 to +85°C- Supply voltage: 2.8V - 5.25VHousing: TOSC 8 Type :DS2413P+PIO Pins Support 20mA max Continuous Current Sink - Supports 28V (max) PIO Pin Operating Voltage - On-Resistance of PIO Pulldown Transistor 20mA, max; OFF Resistance 1MOhm - Parasitic Power Supply Through 1-Wire  

From €3.51*

Product number: 42004

Instantly available
Shipping until , if you place your order within the next .
in production
DS2423 1-wire dual counter / counter module
DS2423 1-Wire Dual Counter Module / DS2423 1-Wire Dual Counter Function: Dual counter module for 1-Wire network 2x 32Bit counter Housing: 6-pin TSOC SMD Housing Supply voltage: 2.8V to 5.25V Module not resettable. For further data please refer to the data sheet Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €13.41*

Product number: 42005

Currently not available, please sign up to get notified

Shipping until
DS2438 Batterie-Management Smart Battery Monitor
1-Wire Battery Management Smart Battery Monitor with Temp Sensor Type/designation DS2438Z+ Housing SOIC-8 (SMD) Supply voltage 2.4 V to 10 V Function Temperature sensor Analog Input 0-10VDC (VAD) Analog Input 0-250mV, +/- (Xsens) Measurement Operating voltage (VDD) Operating temperature -40°C to +85°C Details See data sheet The DS2438 is a Smart Battery Monitor and is used in its original function as a mobile phone battery monitor. For automation, especially in the smart home area, it is also used for other functions: as voltage meter (supplies the bus voltage (VDD) as thermometer - the temperature is measured AD-Converter (VAD) - is used to measure humidity or brightness Current input (XSENS) - freely available Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €8.91*

Product number: 42006

Instantly available
Shipping until , if you place your order within the next .
Shipping until
DS2480 1-Wire Serial Line Driver
DS2480B+ Bus master, serial to 1-Wire deviceDS2480B+ Serial 1-Wire Line Driver with Load Sensor Function: Bus master serial for 1-Wire with load sensor Housing: TO 8 Supply voltage: 2.8V to 5.25V   For further data please refer to the data sheet   Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.  

From €5.31*

Product number: 42008

Instantly available
Shipping until , if you place your order within the next .