MSP 105 1-Wire Multisensor Pro Air Humidity and Temperature Sensor

1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

The ECO 502 central processing unit is a powerful industrial 1-Wire sensor gateway of the latest generation for plant and system system monitoring. The gateway is equipped with an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically to the 1-Wire bus via the Auto-E-Connect plug-and-play system. A wide range of measurement sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), additionally for glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device, without Linux and with its own native programming. was implemented. No unknown libraries are used, which ensures the stability stability and reliability of the system. The WLAN and LAN interface can be used for communication with up to 3 data connections via Modbus/TCP, MQTT, ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -5°C to 50°C Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

The ECO 501 central unit is a powerful industrial 1-wire sensor gateway of the latest generation for plant and system monitoring. The gateway has an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically via the 1-Wire bus using the Auto-E-Connect plug-and-play system. A wide range of measurement sensors are available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), as well as glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server, which can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown librariesDevice security through secure boot and updates with encrypted SSL certificate Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization an branding possible

The ECO 531 central device/gateway is a modern system bus interface for the comprehensive monitoring and control of systems. It integrates up to 30 sensors and actuators via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. The ECO central units are low-maintenance industrial devices that have been the standard for 1-Wire bus systems for over 10 years, offer stability and meet a high "security by design" standard. The gateway can be controlled in parallel by PLC controllers, cloud applications and text protocols through BMS and media control systems. The simple installation of complex networks is facilitated by the integrated 1-Wire Zone feature. ESERA offers a wide range of sensors and actuators for the gateway. User-friendliness is reflected in the intuitive and simple configuration, software updates and provision of data via the web server, accessible via LAN or the access point that can be activated at the touch of a button. HIGHLIGHTS Three 1-wire bus zones, fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -20°C to 50°C Applications Suitable for complex 1-wire networks: Industrial plants Mechanical engineering Building management, IoT and M2M, silo monitoring Energy optimization in many application areas, can be used regardless of manufacturer Optional equipment Ultrafast iButton or RFID Read function for access or security authentication TPM (Trusted Platform Module) hardware for secure boot and SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

The ECO 503 Pro central unit, Industrial Ethernet/LAN switching actuator can be used as an IT switching actuator, IoT cloud switching module and industrial LAN relay module. The switching actuator offers a high switching capacity of 8x16A* and can therefore control complete luminous flux circuits, larger machine or luminaire groups (without dimmers). The integrated high-performance relays can be controlled either by software commands or by 8 digital inputs. The digital inputs are designed for operation with a low voltage of 10-30 VDC and are optimized for push-button operation. The ECO503 central unit supports 4 data protocols: Modbus/TCP, ASCII text, MQTT (with optional SSL encryption). These protocols can communicate in parallel on up to 4 data channels. The device has a web server for switching, configuration and firmware updates. The web server can be accessed via LAN or the access point (activated at the touch of a button). The ECO 503 switching actuator was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which ensures the stability and reliability of the system. Extensive free software support is available. The ECO 503 Pro central processing unit offers a wide range of possible uses and can be seamlessly integrated into various control and automation technology applications. *Note: The specification "8x16A" means that the switching actuator has a total of 8 outputs, each of which can switch a maximum current of 16 amps. HIGHLIGHTS 8 High-performance switching channels (up to 10/16A* switching current), 8 digital inputs for direct control of the switching channels Web server and LAN interface/access point for data, configuration, debug and firmware updates Multi-protocol capable: HTML, Modbus/TCP, MQTT and ASCII Robust and low-maintenance industrial design, can be used for the extended temperature range from -5°C to 50°C regardless of manufacturer Native programming: without Linux and without unknown libraries Cost savings thanks to simple installation and fast commissioning Applications Industrial plant and machinery Smart Building IoT and M2M applications Energy optimization for all consumers, rooms and buildings through central control Switching/control of loads up to 16Amp switching current (switching channels are separately fused) Optional equipment Personalization and branding possible Basis for extensions, e.g. more channels, analog in/out, energy detection, etc.

Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10. The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation Supply voltage 9-30VDC, 0.5A max, Output 1-Wire Interface GND, Data, +5V max. 0.2A Dimensions 32 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

The ESERA-Station 200 is the heart of your smart building application and offers extensive possibilities for IoT and many automation solutions. With its integrated professional 1-Wire interface, it is ideal for controlling and monitoring a wide range of systems. Easy control via tablet or smartphone With the ESERA-Station 200, you can conveniently control your heating, lighting or shutters via your tablet or smartphone. You can also send a wide range of sensor data securely to the cloud, giving you a comprehensive overview of your building automation. An open platform for individual applications The Station 200 is more than just a conventional central control unit. It is an open platform based on industrial standards and supports a wide range of software packages. Thanks to the combination of the embedded computer (Raspberry Pi) and professional ESERA components, it offers maximum flexibility for your individual requirements. It can be easily operated with software such as Codesys, IP-Symcon, OpenHAB, FHEM, NodeRed and many others that are based on a Raspberry Pi. Expandability and adaptability The Station 200 has an internal expansion slot for additional modules, e.g. S0 counter, analog input / output. An RS485 interface with electrical insulation is also available as an option. Further additional modules are currently being planned Versatile application possibilities Various operating systems and corresponding application software can be installed on the powerful embedded computer. As standard software, we offer the ESERA-Station 200 with the smart home and automation software IP-Symcon. This central control unit offers you the flexibility to adapt your automation solution entirely to your needs and is therefore a future-proof investment in your smart building. You can combine the following systems with the ESERA Station 200: The systems listed are examples and depend on the application software and hardware extensions installed. We do not provide a functional guarantee for the specified interfaces and functions: 1-Wire bus via internal ECO controller EnOcean* KNX* (IP-Symcon, Codesys**) HomeMatic* digitalSTROM* (IP-Symcon) XBee/Zigbee* LCN* (IP-Symcon) xComfort* DMX Lighting technology*** (IP-Symcon) Z-Wave* ModBus TCP/RTU***, Slave / Master (IP-Symcon, Codesys**) Voice control from Amazon (Alexa)* M-Bus* (IP-Symcon) SPS Siemens* / WAGO* / Beckhoff* (IP-Symcon, Codesys**) PROFINET Controller / Device (Codesys**) EtherCAT Master (Codesys**) CANopen Master / Slave (Codesys**) EtherNet/IP Scanner / Adapter (Codesys**)  Explanations: * An additional gateway is required for operation. This is not included in the scope of delivery. ** The CODESYS Runtime offered is intended for testing and teaching purposes. No commercial use. For this, the CODESYS Control for Raspberry Pi MC SL must be used. We are happy to offer you this license. *** The optional RS485 interface is required for operation. The RS485 interface can be ordered together with the Station 200.

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy 6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it. Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.