1-Wire bus coupler from ESERA
Fast and stable connection of the 1-Wire network with a PC or other controller
Shipping until
1-Wire Adapter USB DS9490R
1-Wire Adapter USB, DS9490R
USB adapter with 1-Wire interface. The adapter provides a quick and easy connection between the computer and the 1-Wire network. Individual 1-Wire sensors can be connected directly. For a network, a 1-Wire Hub or 1-Wire Hub II is recommended as the central power supply.
Note: The assignment of the 1-Wire RJ11 socket is different to the 1-Wire cable sensors 11105 and 11106.To connect the 1-Wire adapter to the 1-Wire hub we recommend the adapter cable 11311. - High-Speed 12Mbps Universal Serial Bus (USB) Interface - Supports Standard and Overdrive 1-Wire Communication - Slew-Rate-Controlled 1-Wire Timing and Active Pullup for Improved 1-Wire Network Performance - DS9490R has an RJ11 interface for standard connection - Built-In Custom DS2401 Identification Chip - Reads all 1-Wire and iButton Devices. Writes All Except EPROM 1-Wire/iButton Devices
Connection: USB (1.1) to RJ11 (1-Wire)Supply voltage: 5VDC1-Wire device: DS9490
Product number: 11304
Instantly available
Shipping until , if you place your order within the next .
in production
1-Wire Bus Coupler USB Pro, isolated
1-Wire Bus Coupler Pro with USB interface, isolation and external power supply
With the professional 1-Wire Bus Coupler USB V3 a stable and electrically isolated connection of the 1-Wire network and a PC, mini computer (e.g. Raspberry Pi) or to many other controllers is established. The 1-Wire Bus Coupler USB is compatible with the serial version of Maxim, DS9097 and DS9097E, and works with a standard DS2480 1-Wire master device. By using the 1-Wire standard interface module (DS2480), the 1-Wire bus copller is compatible with all controllers that support this module. These are for example IP-Symcon, FHEM, OpenHub and many more.
A special highlight of the 1-Wire Bus Coupler USB V3 is the external power supply. This significantly increases the operational reliability of the data connection to the computer and prevents problems caused by unreliable USB power supplies. The use of more expensive USB hubs is no longer necessary.For the 1-Wire network the 5V output voltage is provided. The insulation prevents interference from and to the PC and reduces possible "electrosmog" in the house. The insulation also increases electrical safety.Individual 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.
Data interface
USB 1.1, with FTDI FT232RL Chip (Virtual COM Port)
Compatibility
To DS9097U 1-Wire Adapter SerialApplicable for many software, such as OWFS, IP-Symcon, FHEM, which is intended for the DS9097U (DS2480 device) Drivers for different operating systems in the download area of this article.
Display LED
Power and data
1-Wire device
DS2480R+
Power supply
9-32 VDC max. 500mA (power supply unit see accessories)
Control
Control by all devices and controllers that support the DS2480 (serial master)
Dimensions
85 x 32 x 70mm
Protection circuit
Reverse polarity protection for 1-Wire output and supply voltage
Isolation
Between 1-Wire bus and PC interface min. 500VDC
Scope of delivery
Finished device and operating instructions
Product number: 11302-U
Currently not available, please sign up to get notified
Shipping until
1-Wire bus coupler with RS232 (TTL 5V), industrial version, galvanic isolation
DIN rail adapter between PC and 1-Wire networkIndustrial 1-Wire bus coupler with RS232 (TTL 5V standard) in industrial design with galvanic isolation between the data and 1-Wire bus interface.1-Wire bus coupler RS232 in DIN rail housing. With the 1-Wire Bus Coupler a fast and easy connection between computer and 1-Wire network or to the PLC via a serial terminal is possible.State-of-the-art high-speed optocouplers and DC/DC power supplies are used for safe galvanic isolation. Even the 1-Wire activity LED has an isolated design. The isolation prevents interference to and from the PC and reduces possible "electrosmog" in the building. The isolation also increases electrical safety.For the 1-Wire network, the 5V output voltage is 250mA max.Single 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.LED indicators for power and activity.Note: The data interface is designed as a D-Sub socket.
Product number: 11302-T
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire bus coupler with RS232 (V24 interface), industrial version, galvanic isolation, DS2480
DIN rail adapter between PC and 1-Wire network, Serial to 1-WireIndustrial 1-Wire bus coupler with RS232 (V24) in industrial design with galvanic isolation between the data and 1-Wire bus interface.1-Wire bus coupler RS232 in DIN rail housing. With the 1-Wire Bus Coupler a fast and simple connection between computer and 1-Wire network or to the PLC via a serial terminal is possible.State-of-the-art high-speed optocouplers and DC/DC power supplies are used for safe galvanic isolation. Even the 1-Wire activity LED has an isolated design. The isolation prevents interference to and from the PC and reduces possible "electrosmog" in the building. The isolation also increases electrical safety.For the 1-Wire network, the 5V output voltage is 250mA max.Single 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.LED indicators for power and activity.
Product number: 11302-R
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire cable Bus coupler PLC
Adapter cable between 1-Wire bus coupler PLC (Part No. 11302-T) and a WAGO® PLC (750-841, 750-881, ...). The adapter cable is designed to connect the 1-wire bus coupler PLC (art.no.11302-T) and a WAGO® PLC, including models 750-841, 750-881 and other models with configuration and programming interfaces. The cable is designed for mounting the 1-Wire bus coupler PLC to the left of the PLC.A description of the library for Codesys (2.3) can be found here.A description of the connection between the 1-Wire bus coupler and the WAGO PLC controller can be found here.
Connection: 1 x D-SUB9 connector on pin row 4-PIN WAGO assignment (GND, RX and TX signals) Dimensions: Cable length approx. 15cm
Product number: 11312
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Adapter cable USB adapter open
Adapter cable RJ12 to open cable ends. Connection cable between 1-Wire USB adapter DS9490 (1-wire bus master) and 1-wire hub, 1-wire hub III or sensors.
Connection: 1 x RJ12 connector on open cable ends (5V, 1-Wire Data, GND) Dimensions: length approx. 2,5m
Product number: 11310
Instantly available
Shipping until , if you place your order within the next .