ESERA-Station - the Smart Home controller center

ESERA-Station 200 - expandable, open and future-proof Central control with integrated professional 1-Wire interface for Smart Building, IoT and general automation applicationsTheESERA-Station is the central control unit of your Smart Home and for Internet of Things (IoT). The ESERA station is more like another central controller. It is an open platform, is a combination of an embedded computer and professional ESERA ECO controller. It is an open automation control center built on standards.ESERA station is usable for a variety of software packages, Codesys*****, IP-Symcon, OpenHAB, FHEM, NodeRed and many more, built on a Raspberry Pi 3b.Thefollowing modules are integrated in the ESERA-Station 200:Powerful ARM Quad Core Embedded Computer, Raspberry Pi 3b New in 2021ECO 200 1-Wire controller of the latest generationwithPlug and Play system (Auto-E-Connect Support) for 1-Wire.No matter which IoT or automation system you are already using or still planning to use, you can combine them with ESERA Station 200.You can combine the following systems with ESERA Station 200: The listed systems are exemplary and depend on the installed application software and hardware extensions. Wired / Cable systems / Bus systems*** (Exemplary) Radio based / Radio systems*** (Exemplary) ESERA 1-Wire Gateway (ASCII and Modbus RTU software interface) EnOcean* KNX* (IP-Symcon, Codesys*****) HomeMatic* digitalSTROM* (IP-Symcon) XBee/Zigbee* LCN* (IP-Symcon) xComfort* DMX lighting technology** (IP-Symcon) Z-Wave* ModBus TCP/RTU**, Slave / Master (IP-Symcon, Codesys*****) Voice control from Amazon (Alexa)*, *** M-Bus* (IP-Symcon) PLC Siemens* / WAGO* / Beckhoff* (IP-Symcon, Codesys*****) PROFINET Controller / Device (Codesys*****) EtherCAT Master (Codesys*****) CANopen Master / Slave (Codesys*****) EtherNet/IP Scanner / Adapter (Codesys*****) * An additional gateway is required for operation. This is not included in the scope of delivery.** The optional RS485 interface is required for operation. The RS485 interface can be ordered together with the Station 200.*** The functions depend on the installed application software. The listed systems are related to the operation with IP-Symcon and Codesys and are to be understood as an example. The scope of functions can be found in the respective application software.**** ESERA sensors and actuators of the Pro series with Auto-E-Connect support are required.***** The offered CODESYS Runtime is intended for testing and teaching purposes. All scripts, software modules and extensions of IP-Symcon can be used. To manage and configure your smart home or smart system, the IP-Symcon management console is available for temptation. After installing the runtime environment, the Raspberry Pi can be programmed as a PLC using the CODESYS Development System.The product is installed into the Linux distribution Raspbian via the CODESYS Development System using the included CODESYS Deploy Tool extension. After each restart of the Raspberry Pi, the runtime system is automatically started.

KNX Ethernet Interface KNX Interface for extending the ESERA Station for integration into KNX systems The KNX interface is used to establish a bidirectional connection KNX network between the ESERA Station or a PC and the KNX installation bus. The connection is established via a LAN network (IP). The IP address can be assigned via a DHCP server or by manual configuration (ETS). The device operates according to the KNXnet/IP specification using core, device management and tunnelling. It can be used as a programming interface for the ETS. The device is supplied via the KNX bus and requires no additional power supply. The LEDs on the front of the device visualise the connection status, telegram traffic and communication errors for LAN and KNX. The status of the tunelling connections can also be visualized with the help of the buttons. Design: Modular device 1TE, interface: Ethernet connection is electrically isolated from the KNX bus. The interface is compatible with ETS (Engineering Tool Software) from ETS3 and higher. The device has implemented a complete KNX stack with communication objects and BAOS protocol V2. Thus it offers the possibility to extend devices with Ethernet interface to full KNX functionality, which can even be programmed by ETS. KNX interface KNX Bus Twisted Pair, Compatible with ETS from ETS3 support of KNX Long Frames, Object Server with 250 data pointsEthernet connection is galvanically isolated from the KNX bus. The interface is compatible with ETS (Engineering Tool Software) as of ETS3, the device has a complete KNX stack with communication objects and BAOS protocol V2 implemented KNX data interface: Terminal for KNX BUS (red / black) Protocol: KNX Stack with communication objects and BAOS protocol V2 Supply voltage: KNX bus current consumption approx. 15mA Dimensions: In-line installation, installation width 1 TE, 18 mm Connection: Terminal for KNX BUS (red / black), LAN connection socket RJ-45 Manufacturer / Type Weinzierl / KNX IP BAOS 773 Assembly: Designed for top hat rail Scope of delivery: KNX Ethernet Interface, data sheet

KNX USB Interface USB KNX Interface for extending the ESERA station for integration into KNX systems The KNX interface is used to establish a bidirectional connection KNX network between the ESERA station or a PC and the installation bus KNX. The connection is established via USB cable. The device can also be used as a programming interface for the ETS. The device is supplied via the USB and KNX bus and does not require any additional power supply. The LEDs on the front of the device visualize the connection status, the telegram traffic and communication errors for USB and KNX. It supports KNX Long Frames and is used to establish a bidirectional KNX network connection between a PC and the KNX installation bus. Interface: USB port is galvanically isolated from the KNX bus. The interface is compatible with ETS (Engineering Tool Software) from ETS3 and higher. The device has a complete KNX stack with communication objects and BAOS protocol V2 implemented. Thus it offers the possibility to extend the ESERA station or other devices with USB connection to full KNX functionality, which can then even be programmed by ETS. KNX interface KNX Bus Twisted Pair, Compatible with ETS from ETS3 on, support of KNX Long Frames, USB connector is galvanically isolated from the KNX bus. The interface is compatible with ETS (Engineering Tool Software) as of ETS3, the device has implemented a complete KNX stack with communication objects and BAOS protocol V2. Thus it offers the possibility to extend devices with USB connection to full KNX functionality, which can then even be programmed by ETS. KNX data interface: Terminal for KNX BUS (red / black) Protocol: KNX Stack with communication objects and BAOS protocol V2 Supply voltage: KNX bus and USB Power consumption approx. < 100mW (USB) or <100 mW (KNX) Dimensions: In-line installation, installation width 1 TE, 18 mm Connection: Terminal for KNX BUS (red / black), USB socket, type B Manufacturer / Type Weinzierl / KNX IP BAOS 721 Assembly: Designed for top hat rail Scope of delivery: KNX Ethernet Interface, Data Sheet