The ECO 160 Pro central unit, the smart building multi-zone sensor gateway, offers an integrated 1-wire switch for up to three separate 1-wire buses*. It is the central 1-Wire interface in your home and is characterized by its extreme flexibility and powerful sensor and actuator interface of the latest generation. The central unit integrates seamlessly into numerous smart home and smart building software applications. Cost and time savings thanks to quick installation and commissioning: Connect, switch on and receive measured values. This gateway is equipped with an access point and a web server. Up to 30 sensors can be connected to the ECO 160 using the Auto-E-Connect plug-and-play system. Flexibly divided into up to 3 separate 1-bus zones*. A wide range of measuring sensors are available, including temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), as well as glass breakage and smoke detectors. All 1-wire sensors and actuators are read out in a 5-second cycle. The configuration, software updates and sensor production data are conveniently provided via the web server. The intuitive operation of the web server is accessible via LAN and the access point. Designed as a low-maintenance device according to industry standards, this system was implemented without Linux and with its own native programming. Unknown libraries are not used to ensure stability and reliability. The LAN interface enables 2 data connections via MQTT and the ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors, can be divided into up to 3 separate bus zones using an integrated 1-wire switch Web server and access point for data, configuration, debug and firmware updates Data interface for MQTT, Modbus/TCP and ASCIINatively programmed, without Linux and without unknown libraries Low-maintenance device in industrial quality, with extensive device protection, suitable for extended temperature range from -5°C to +50°C Applications Smart Home and Smart Building: universal sensor and actuator interface for modern building automation Sensor-actuator interface for various multimedia and smart home software applications: Crestron, IP-Symcon, IO-Broker, Home Assistant, openHAB, NodeRed and many more Up to 30 sensors can be connected via Plug and Play Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Secure Boot SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without learning *1-Wire zones 1 and 2 are currently activated in the scope of delivery. Activation of the 3rd zone requires the purchase of a paid license, which is conveniently available via our webshop. The license can then be imported directly into the gateway online."

The ECO 503 Pro central unit, Industrial Ethernet/LAN switching actuator can be used as an IT switching actuator, IoT cloud switching module and industrial LAN relay module. The switching actuator offers a high switching capacity of 8x16A* and can therefore control complete luminous flux circuits, larger machine or luminaire groups (without dimmers). The integrated high-performance relays can be controlled either by software commands or by 8 digital inputs. The digital inputs are designed for operation with a low voltage of 10-30 VDC and are optimized for push-button operation. The ECO503 central unit supports 4 data protocols: Modbus/TCP, ASCII text, MQTT (with optional SSL encryption). These protocols can communicate in parallel on up to 4 data channels. The device has a web server for switching, configuration and firmware updates. The web server can be accessed via LAN or the access point (activated at the touch of a button). The ECO 503 switching actuator was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which ensures the stability and reliability of the system. Extensive free software support is available. The ECO 503 Pro central processing unit offers a wide range of possible uses and can be seamlessly integrated into various control and automation technology applications. *Note: The specification "8x16A" means that the switching actuator has a total of 8 outputs, each of which can switch a maximum current of 16 amps. HIGHLIGHTS 8 High-performance switching channels (up to 10/16A* switching current), 8 digital inputs for direct control of the switching channels Web server and LAN interface/access point for data, configuration, debug and firmware updates Multi-protocol capable: HTML, Modbus/TCP, MQTT and ASCII Robust and low-maintenance industrial design, can be used for the extended temperature range from -5°C to 50°C regardless of manufacturer Native programming: without Linux and without unknown libraries Cost savings thanks to simple installation and fast commissioning Applications Industrial plant and machinery Smart Building IoT and M2M applications Energy optimization for all consumers, rooms and buildings through central control Switching/control of loads up to 16Amp switching current (switching channels are separately fused) Optional equipment Personalization and branding possible Basis for extensions, e.g. more channels, analog in/out, energy detection, etc.

High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs: With this 8-fold switching module, 8 DC or AC consumers can be switched via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example The module is designed for a load capacity of 10A per channel (16A for 3 seconds) continuous current. Each channel has a separate current input. This allows you to switch 8 independent circuits with the maximum power of a 10A circuit breaker. The 8 external push-button inputs and the status of the relay outputs are displayed separately via the 1-Wire interface. In addition, the status of the relay outputs is displayed via the 1-Wire interface, regardless of whether the relay output was switched via an external button, internal menu or 1-Wire interface.