High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs

The brightness of the connected lamps can either be controlled or switched on and off using the touch dimmer function in the living room (extension unit input), via the push-buttons on the top of the module or via the 1-Wire interface. Any push-buttons from all switch ranges can be used for the touch dimmer function. The dimmer response is perceived as very soft and pleasant. You can change the brightness by pressing and holding the living area or module button. You can switch on or off with a short press of the button. The touch dimmer function works with a 12VDC/24VDC DC voltage that does not cause any unwanted interference in its surroundings. This makes the Dual Dimmer ideal for low-radiation areas such as bedrooms and living rooms. In addition to manual control, you also have the option of integrating the leading edge phase control dimmer into your smart home control system. The 1-Wire bus interface is available for this purpose. This dimmer is suitable for light bulbs, dimmable LEDs, high-voltage halogen lamps (ohmic loads), low-voltage halogen lamps (12VDC) and fans (inductive loads) with corresponding power. Note: Low-voltage halogen lamps may only be operated in conjunction with a conventionally wound transformer. Not suitable for loads with electronic ballast, energy-saving and fluorescent lamps. For the living room touch dimmer function, it is sufficient if the dimmer is supplied with the 1-Wire bus voltage (12VDC). This means that the installation in your home is already "smart home ready". This also guarantees that the lighting will work even if the Smart Home control has not yet been programmed or has failed. Overview of the functions: 2-channel leading edge phase control dimmer with soft start and soft dimming behavior Maximum output power: 460W (460VA); with up to 6 LED lamps max. 200W (200VA) Minimum load 6W (6VA) Optionally 32 levels for gentle or 128 levels for very gentle dimming behavior Saving the last dimming level Data output of the current dimming values Status feedback from the digital inputs (push-button interface) Compatible with all 1-Wire control units. Convenient control with the extended range of functions of the ESERA 1-Wire controllers / 1-Wire gateways

1-Wire Dual Switching Module Pro 10/16A Relay with Push Button Interface Application The 1-Wire Dual switching module can switch all types of DC or AC loads with up to 16/10A current. This allows all types of loads to be switched. The module is also ideally suited for lighting control in living areas, as the module is equipped with two push-button inputs in addition to the 1-wire interface. No external voltage is required for the button inputs. You can use it to switch the light on or off, for example, either by push-button or 1-Wire command. The advantage here is that the basic function, On-Off, is always given by push button. Automatic functions such as scenes or "Central Off" are added via the 1-Wire interface. The current relay and button status is reported via a 1-wire interface. Features The 1-Wire Dual Switching Module has two high power switching relays for switching two DC or AC loads. You will always receive the current relay status via a 1-Wire interface, regardless of whether it is switched by a 1-Wire command, manual operation or an external pushbutton. You also receive the status of the digital input (button interface) via the 1-Wire interface.