With the 1-Wire Analog Output Pro, a DC voltage in the range of 0-10VDC with a resolution of 8 bits can be easily output. The output module can be used, for example, to control a heating mixer, a dimmer or other power components. The analog output is electrically isolated from the 1-wire bus and the power supply, which prevents ground loops or unwanted side effects due to potential differences.

8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 8A 230V - with push-button inputs: This switching module can be used to switch 8 DC or AC consumers via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example. The module is designed for a load capacity of 8A per channel and a total of 10A continuous current.

High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs: With this 8-fold switching module, 8 DC or AC consumers can be switched via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example The module is designed for a load capacity of 10A per channel (16A for 3 seconds) continuous current. Each channel has a separate current input. This allows you to switch 8 independent circuits with the maximum power of a 10A circuit breaker. The 8 external push-button inputs and the status of the relay outputs are displayed separately via the 1-Wire interface. In addition, the status of the relay outputs is displayed via the 1-Wire interface, regardless of whether the relay output was switched via an external button, internal menu or 1-Wire interface.

DI/DO (Digital Input/Output) 1-Wire Shutter Pro shutter control with push-button inputs: With the 1-Wire Shutter Pro module, you can easily control a roller shutter motor, external blinds or awnings manually or automatically via the 1-Wire network. This enables both convenient, centralized control and local control. The outputs of the 1-Wire Shutter Pro are switched by relays that are electrically interlocked. This prevents simultaneous up and down commands for the motor. In addition, a safety cut-out is provided which automatically switches the motor off after 120 seconds. New: In addition to the up and down commands, a running time can also be specified by software via the 1-wire interface. Travel times of 250ms, 500ms and 750ms for movements and 1-60 seconds for normal running operation can now be transmitted. The status of the outputs (relay status) and the push-button inputs is also output via the 1-Wire interface. With additional isolating relays, shutter groups can thus be controlled via one module Product details: Convenient operation via push-buttons for up and down movements. The buttons can be installed in the window area or next to a room door, for example. A safe DC voltage of 10-30VDC is used for these external operating elements. Automatic operation is carried out using the "Up" or "Down" commands via the data interface of the 1-Wire controller/gateway. An integrated safety circuit automatically switches the roller shutter motor off after 120 seconds. This provides additional protection for the motor in the event of a defective limit switch. Note: The module is only intended for roller shutter motors with integrated limit switches.