1-Wire distributor 3, star-bus topology with push-in terminals

Quantity	Unit price
1 to 49	€35.90*
50 to 99	€34.11*
From 100	€32.31*

Prices excl. VAT plus shipping costs

Currently not available, please sign up to get notified

piece

By submitting, you accept our terms & conditions as well as our privacy policy

Product number: 11142

EAN: 0782321213597

Manufacturer product ID: 11142

Product information "1-Wire distributor 3, star-bus topology with push-in terminals"

Overview

1-Wire distributor 3 for cabling 1-Wire sensors in star-shaped bus topology, Push In terminals passive

Description

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology with 6 outputs on push-in terminals* plus one RJ45 modular jack

Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators.
Area of application: Smart Home, Smart Building

Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables.
This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over.

You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.
The distributor complements the existing 1-Wire cabling system based on CAT patch cables.

*Push In terminals are screwless terminal connections.

Properties

Internal sensors:	no sensor
Mounting:	DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is Desktop, mobile application
Number of inputs / outputs:	1 - channel output 7 - channel input
Plug and Play support , Auto-E-Connect Support:	Yes
Protection circuit:	Reverse polarity protection for voltage supply / power supply Overvoltage protection for the voltage supply / power supply Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use
Data interface:	Industrial 1-Wire bus (12V, 5V, 1-Wire data and ground (GND)
Function:	1-wire distributor
1-Wire Interface:	Standard 1-Wire bus functions Parasitic operation is not supported (2-wire operation without 5V power supply)
Versions:	Basic version / Basic series
Power supply, Supply Voltage:	System supply, 5VDC (1-Wire main voltage) System supply, 12VDC (1-Wire auxiliary voltage)
Connection type:	RJ45 connector / connection, 8 pin Push In terminal block
Dimensions:	40 x 112 x 24mm (LxWxD)
Enclosure:	Open circuit board with ABS plastic base. Plastic with high percentage of recycled plastic, green (RAL 6020).
Colour:	green white
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):	IP00 Protection class III
Temperature range, operation:	-25°C to +70°C, Extended temperature range 1, (E1)
Humidity Operation / Storage:	10% to 92% (non-condensing)
Temperature range, storage:	-25°C to +70°C, Extended temperature range 1, (E1)
Software version / Support:	without software
Scope of delivery:	Device and user manual
Design / Manufacturer:	ESERA

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Device Documentation	Operating instructions, connection diagram, conformity, ...
Info Material	Product catalogue, Brochures
Technical Downloads	Software & co.
Worth knowing	Wikis, entries, tutorials

Related products

Shipping until

1-Wire adapter 2, RJ45 to push-in terminals

The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors. The 1-Wire Adapter 2 has the RJ45 socket with the pin assignment for CAT network cables on the input side and the push-in terminals for earth, 5V, 12V and 1-Wire Data on the output side. It is no longer necessary to remove the existing network connectors.

From €8.01*

Product number: 11124

Currently not available, please sign up to get notified

Details

Shipping until

1-Wire distributor 4, linear bus topology with push-in terminals

1-Wire distributor for cabling 1-Wire sensors in linear bus topology with 6 outputs on push-in terminals* plus one RJ45 modular socket Distribution module for simple cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Intended for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This enables fast and cost-sensitive cabling. Thanks to the use of push-in clamps, you do not need a screwdriver for installation. The days of screws coming loose are also over. You can connect several 1-Wire distributors 4 to other 1-Wire distributors quickly and easily using a network patch cable. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections

From €29.61*

Product number: 11162

Currently not available, please sign up to get notified

Details

Shipping until

1-Wire distributor 2, RJ12 passive

Passive 1-Wire distributor module with 6 outputs for 1-Wire temperature cable sensors with RJ12 connector. The distributor supplements the existing 1-Wire temperature sensor system based on modular RJ12 connectors, enabling fast and cost-sensitive cabling. *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Currently not available, please sign up to get notified

Details

Shipping until

1-Wire distributor 1, RJ45 passive

Passive 1-wire distributor with 6 outputs on RJ45 modular sockets Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-Wire cabling system based on network cables. This enables fast and cost-sensitive cabling.

From €28.71*

Product number: 11140

Currently not available, please sign up to get notified

Details

Shipping until

1-Wire distributor 7, star-bus topology with push-in connector

The 1-Wire distributor 7 Professional offers an efficient solution for star-shaped cabling of 1-Wire sensors and actuators in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributor 7s together in a star configuration using system cables. The distributor is compatible with existing ESERA cabling systems.

From €38.69*

Product number: 11166

Currently not available, please sign up to get notified

Details