1-Wire adapter 2, RJ45 to push-in terminals
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€8.90
|
| 50 to 99 |
€8.46
|
| From 100 |
€8.01
|
Available, delivery time: 1-5 days, depending on the carrier
Product information "1-Wire adapter 2, RJ45 to push-in terminals"
Overview
Description
The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors.
The 1-Wire Adapter 2 has the RJ45 socket with the pin assignment for CAT network cables on the input side and the push-in terminals for earth, 5V, 12V and 1-Wire Data on the output side. It is no longer necessary to remove the existing network connectors.
Properties
| Internal sensors: |
|
|---|---|
| Mounting: |
|
| Number of inputs / outputs: |
|
| Plug and Play support , Auto-E-Connect Support: | Yes |
| Protection circuit: | Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use |
| Data interface: | Industrial 1-Wire bus (12V, 5V, 1-Wire data and ground (GND) |
| Function: | 1-wire adapter |
| 1-Wire Interface: |
|
| Versions: | Basic version / Basic series |
| Power supply, Supply Voltage: |
|
| Connection type: |
|
| Dimensions: | 40 x 23 x 18mm (LxWxH) |
| Enclosure: | Open housing, open assembly / printed circuit board |
| Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
| Temperature range, operation: | -25°C to +70°C, Extended temperature range 1, (E1) |
| Humidity Operation / Storage: | 10% to 92% (non-condensing) |
| Temperature range, storage: | -25°C to +70°C, Extended temperature range 1, (E1) |
| Scope of delivery: | Device and user manual |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Related products
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.
Product number: 11118
Available, delivery time: 1-5 days, depending on the carrier
Passive 1-wire distributor with 6 outputs on RJ45 modular sockets Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-Wire cabling system based on network cables. This enables fast and cost-sensitive cabling.
Product number: 11140
Available, delivery time: 1-5 days, depending on the carrier
Passive 1-Wire distributor module with 6 outputs for 1-Wire temperature cable sensors with RJ12 connector. The distributor supplements the existing 1-Wire temperature sensor system based on modular RJ12 connectors, enabling fast and cost-sensitive cabling. *Push In terminals are screwless terminal connections.
Product number: 11141
Available, delivery time: 1-5 days, depending on the carrier
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology with 6 outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.
Product number: 11142
Available, delivery time: 1-5 days, depending on the carrier
1-Wire distributor for cabling 1-Wire sensors in linear bus topology with 6 outputs on push-in terminals* plus one RJ45 modular socket Distribution module for simple cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Intended for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This enables fast and cost-sensitive cabling. Thanks to the use of push-in clamps, you do not need a screwdriver for installation. The days of screws coming loose are also over. You can connect several 1-Wire distributors 4 to other 1-Wire distributors quickly and easily using a network patch cable. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections
Product number: 11162
Available, delivery time: 1-5 days, depending on the carrier
The 1-Wire distributor 6 Professional offers an efficient solution for the linear cabling of 1-Wire sensors in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributors 6 LIN linearly with each other via system cable. The distributor is compatible with the existing ESERA cabling systems
Product number: 11164
Available, delivery time: 1-5 days, depending on the carrier
The 1-Wire distributor 7 Professional offers an efficient solution for star-shaped cabling of 1-Wire sensors and actuators in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributor 7s together in a star configuration using system cables. The distributor is compatible with existing ESERA cabling systems.
Product number: 11166
Available, delivery time: 1-5 days, depending on the carrier