1-Wire Adapter / 1-Wire Verteiler für Kabelsensoren

With our

1-Wire Adapters and -Distributors

a fast and cost-sensitive cabling of the 1-Wire cable sensors is possible.

You can find matching

1-Wire cable sensors here:

1-Wire Temperature sensors in cable form for measurements outdoors, on surfaces or in water (cable sensors)
1-Wire Temperature sensors in housings for indoor and outdoor use (wall sensors)

1-Wire adapter 1, RJ12 to push-in terminals

Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Available, delivery time: 1-5 days, depending on the carrier

Details

1-Wire adapter 2, RJ45 to push-in terminals

The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors. The 1-Wire Adapter 2 has the RJ45 socket with the pin assignment for CAT network cables on the input side and the push-in terminals for earth, 5V, 12V and 1-Wire Data on the output side. It is no longer necessary to remove the existing network connectors.

From €8.01*

Product number: 11124

Available, delivery time: 1-5 days, depending on the carrier

Details

1-Wire distributor 1, RJ45 passive

Passive 1-wire distributor with 6 outputs on RJ45 modular sockets Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-Wire cabling system based on network cables. This enables fast and cost-sensitive cabling.

From €28.71*

Product number: 11140

Details

1-Wire distributor 2, RJ12 passive

Passive 1-Wire distributor module with 6 outputs for 1-Wire temperature cable sensors with RJ12 connector. The distributor supplements the existing 1-Wire temperature sensor system based on modular RJ12 connectors, enabling fast and cost-sensitive cabling. *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Available, delivery time: 1-5 days, depending on the carrier

Details

1-Wire distributor 3, star-bus topology with push-in terminals

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology with 6 outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time: 1-5 days, depending on the carrier

Details

1-Wire distributor 4, linear bus topology with push-in terminals

1-Wire distributor for cabling 1-Wire sensors in linear bus topology with 6 outputs on push-in terminals* plus one RJ45 modular socket Distribution module for simple cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Intended for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This enables fast and cost-sensitive cabling. Thanks to the use of push-in clamps, you do not need a screwdriver for installation. The days of screws coming loose are also over. You can connect several 1-Wire distributors 4 to other 1-Wire distributors quickly and easily using a network patch cable. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections

From €29.61*

Product number: 11162

Available, delivery time: 1-5 days, depending on the carrier

Details

1-Wire distributor 6, linear bus topology with push-in connector

The 1-Wire distributor 6 Professional offers an efficient solution for the linear cabling of 1-Wire sensors in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributors 6 LIN linearly with each other via system cable. The distributor is compatible with the existing ESERA cabling systems

From €38.69*

Product number: 11164

Available, delivery time: 1-5 days, depending on the carrier

Details

1-Wire distributor 7, star-bus topology with push-in connector

The 1-Wire distributor 7 Professional offers an efficient solution for star-shaped cabling of 1-Wire sensors and actuators in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributor 7s together in a star configuration using system cables. The distributor is compatible with existing ESERA cabling systems.

From €38.69*

Product number: 11166

Available, delivery time: 1-5 days, depending on the carrier

Details