1-Wire Hub III DC, central power supply
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€77.90*
|
| 50 to 99 |
€74.01*
|
| From 100 |
€70.11*
|
Instantly available
Shipping until , if you place your order within the next .
Product number:
11322
EAN:
0098931698632
Manufacturer product ID:
11322
Product information "1-Wire Hub III DC, central power supply"
Overview
Zentrale Stromversorgung, Systemnetzteil
Description
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage.
The 1-Wire Hub III DC is the central module for building a 1-Wire network.
The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller.
The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls.
Equipment / Function:
- Central power supply of the 1-Wire network
- 1-Wire distribution for several bus sections
- LED display for power and 1-Wire activity
- Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.
Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.
Properties
| 1-Wire Plug and Play System, Auto-E-Connect Functions: |
|
|---|---|
| Mounting: | DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is |
| Number of inputs / outputs: | 1 - channel output |
| Protection circuit: |
|
| Versions: |
|
| Data interface: |
|
| Function: |
|
| 1-Wire Interface: |
|
| Versions: | Professional Version / Professional Series |
| Power supply, Supply Voltage: | 18 - 30VDC (24VDC) |
| Connection type: | Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section |
| Dimensions: | 4TE, 70 x 90 x 70mm (LxWxH) |
| Enclosure: | ABS plastic with high percentage of recycled plastic, green (RAL 6020) |
| Colour: | green |
| Software version / Support: | without software |
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Accessories
Tip
Shipping until
EC 1 central unit, Smart Home sensor gateway
The EC 1 central unit is designed for the autonomous management of a 1-Wire network. The user does not have to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators).
The central processing unit evaluates the sensor and actuator data internally and outputs it cyclically (1-2 sec.) in plain text once converted (e.g. for temperature sensors in C°). In addition, the article number for ESERA modules can be entered; the calculation and output are adapted to the function of the module
A wide range of sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm contacts, glass breakage and smoke detectors
The 1-Wire interface of the sensor gateway of the EC 1 central unit is designed so that both small and large 1-Wire networks with long cable runs can be set up safely. The 1-Wire sensors can be operated simultaneously in mixed parasitic* or normal mode. The currently most powerful 1-Wire interface for maximum data security has also been installed for complex network structures.
The EC 1 Smart Home sensor gateway has a wide-range input of 9 - 30VDC for the power supply. It is therefore equally suitable for 12VDC and the industry-typical 24VDC supply voltages. Accessories such as top-hat rails and plug-in power supply units: see homepage.
HIGHLIGTHS
Low-cost entry-level module with functionalities of the professional ECO gateway central units
Intuitive operation via web server functionality
Data interface for Modbus/TCP, MQTT and ASCII
LAN interface for data, configuration, debug and firmware updates
ESERA-patented Auto-E-Connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices
Optional equipment
Ultrafast iButton or RFID Read function for access or security authentication
Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming.
Customizations and branding possible
Product number: 11319
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Term 1
Active termination for 1-Wire networks
In a 1-Wire network, the 1-Wire Term 1 provides a defined termination at the end of the 1-Wire network, thus ensuring a stable and professional 1-Wire network. The 1-Wire Term 1 is therefore a basic component of every 1-Wire network. The module contains a passive and active terminating resistor and a signaling of bus activity. The active termination (1-Wire Term 1) is highly recommended to increase the maximum line length and improve the system stability of the 1-Wire network, especially for long 1-Wire lines and for a star or tree topology setup.
In a 1-Wire network, up to 3 1-Wire Term 1 modules can be connected.
The 1-Wire Term 1 is very compact and can be ideally installed in a flush-mounted box.
Function
Termination for 1-Wire networks, active
Channel
1 channel
Operating voltage
5VDC, max. 5mA
Display
2, LED for power and 1-Wire data
Miscellaneous
Integrated overvoltage and reverse polarity protection
Dimensions
40x40x25mm (LxWxH)
Scope of delivery
Module and operating instructions
Integration into 1-Wire network
The 1-Wire Term 1 module is mounted at the end of a 1-Wire network cable. If the 1-Wire network is star-shaped, i.e. with several 1-Wire cable sections, a 1-Wire Term 1 module should be connected to each end. You should not use more than three 1-Wire Term 1 modules in a 1-Wire network.
Linear Topology
The structure corresponds to the linear topology with the difference that the slaves are connected to the main line via cables with a length of more than 3m (branch, stub).
Star or tree topology
The network is divided into several large strings at or near the 1-Wire bus coupler / 1-Wire controller /1-Wire hub (bus master). Sensors and actuators (e.g. switching modules) are connected at the end or along the respective string.
For more information, please refer to the operating instructions under Links/Downloads.
Product number: 11355
Instantly available
Shipping until , if you place your order within the next .
Tip
Shipping until
4-way DI module (digital input) - Push-button/switch interface
The ESI 400 4-fold digital input module makes it easy to query push-buttons, switches or reed contacts (magnetic switches).
For example, the status of doors, windows, fire dampers or a garage door can be recorded by simply installing a reed switch at a suitable location and connecting it to the DI module. The status LED flashes when there are signal changes at the inputs.
Even short switching pulses, e.g. from buttons, are detected by the ESI 400 module and stored until the next readout cycle.
The ESI 400 4-fold DI module can be connected directly to switches or push-buttons. No external power supply is required for the switches. The module can be supplied with a 5V - 12V operating voltage.
Product number: 11235
Instantly available
Shipping until , if you place your order within the next .
Related products
Shipping until
1-Wire distributor 2, RJ12 passive
Passive 1-Wire distributor module with 6 outputs for 1-Wire temperature cable sensors with RJ12 connector. The distributor supplements the existing 1-Wire temperature sensor system based on modular RJ12 connectors, enabling fast and cost-sensitive cabling.
*Push In terminals are screwless terminal connections.
Product number: 11141
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 1, RJ45 passive
Passive 1-wire distributor with 6 outputs on RJ45 modular sockets
Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-Wire cabling system based on network cables. This enables fast and cost-sensitive cabling.
Product number: 11140
Instantly available
Shipping until , if you place your order within the next .