4-way DI module (digital input) - Push-button/switch interface

The reed contact / magnetic contact is used as opening detector for monitoring doors, housings, windows and for smart home systems. The housing variants of the magnetic switch incl. the magnet as built-in and surface-mounted version allow an optimal adaptation to the object to be protected. It is suitable for both recessed and surface mounting. As protection against sabotage (bridging protection) a connection cable with four wires of the same colour is used. The surface-mounted housings are designed so that the contact can be installed in both directions. To ensure magnetic decoupling in the case of ferromagnetic objects, or to compensate for any height compensation, spacer blocks are supplied with the surface-mounted version. It can be mounted on a door frame, a window block or on the standing surface of an object to be monitored in such a way that an alarm is triggered if it is opened or lifted by more than 2 cm. VdS:     VdSClass B                       according to VdS GmbH (Damage prevention GmbH) Material:                      PA Magnet:                       Diameter 6 mm x 19 mm Neodymium, axially polarized Protection class:          IP 67 Connection cable:       4-core Cable length:               5 m LIYY ZGL 4 x 0.14 mm² Cu tin-plated LSA insulation,displacement technology suitable. Dimensions (WxHxD): 35 x 10 x 10 mm Color:                           white Contact type:               1 - pole NO contact Contact dimensions:    6 x 19mm Mounting flange:          6x6 / 10 mm for magnet and contact; for wood,  plastic, aluminium and non-magnetic metals  

1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy 6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it. Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

Prepared for the next flood! Leakage sensor / water detector to protect against water damage The leakage sensor reliably detects moisture or water on the floor. The sensor itself is housed in a waterproof housing, so it can "survive" without damage even at higher water levels. The leakage detector can be integrated into a 1-Wire network in combination with our 1-Wire Switch Input Module Art.No. 11214  (not included) . The module can be supplied with 12V voltage from a 1-Wire hub. The switching polarity and sensitivity is adjustable. Typical applications are the detection of liquids due to defective water pipes, defective washing or dishwashing machines and flooding. The relay contact closes when moisture is detected. Measuring method:    Electrolytic AC voltage measurement Evaluation:                    relay  contact (active open or closed) Power supply:              12V AC or DC (+/-10%)  / relay contact:                max. 30V / 4A Dimensions:                  80 x 82 x 58mm Scope of delivery:        sensor, operating instructions

1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

5 different coloured wires (YV wire), each 5 m long. Colours: red, black, blue, green, yellow for wiring of 1-Wire modules in the control cabinetDesign: wire (YV) 0.5qmm Length: 5m each colourColours: red, black, blue, green, yellow