8-way DI module (digital input)
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€89.90*
|
| 50 to 99 |
€85.41*
|
| From 100 |
€80.91*
|
Instantly available
Shipping until , if you place your order within the next .
Product number:
11216
EAN:
0098931698489
Manufacturer product ID:
11216
Product information "8-way DI module (digital input)"
Overview
8-Fold Digital Input / Binary Input 10-30V DC for Smart Bulding, IoT, Industrial and Commercial.
Industrial 1-Wire Bus.
Supports EPuP, Auto-E-Connect
Description
- With the 8-fold digital input module the status of 8 switches, reed contacts or all kinds of digital sensors can be queried.
- The status of the switch inputs is displayed via the LED indicators on the front panel.When the input voltage is present, the respective LED indicator lights up.
Advantage
- You can acquire 8 digital signals via one module
- Via manual keys you can simulate an input status without the input being connected. This is very helpful during commissioning or maintenance.
- Per ESERA extended Plug and Play system, called "Auto-E-Connect", the 8-fold digital input is installed fully automatic in ECO Controller easy and fast.
Features
- Interference immunity: For protect the inputs against interference, the module has filters with a delay of only 30ms.
- Storage: Even short changes of the input signals are stored. So no signal or pulse can be lost between the reading cycle.
- Manual function: Each input can be set manually by push button for test purposes, maintenance or development.
- Isolation: The inputs are isolated from the 1-Wire network by optocouplers. This allows very long connection cables between the module and the sensors without interfering with the 1-Wire bus. In addition, the isolation between switch inputs and 1-Wire network provides increased safety.
For the operation of the module we recommend the use of one of our 1-Wire Hub modules.
Properties
| 1-Wire Plug and Play System, Auto-E-Connect Functions: |
|
|---|---|
| Measurement values: | Digital input 12V to 30VDC (12-30VDC) |
| Mounting: | DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is |
| Number of inputs / outputs: | 8 - channel output |
| Data interface: | Industrial 1-Wire Bus (12V, 1-Wire Data and ground (GND) |
| Function: | Digital Input |
| 1-Wire Interface: | DS2408 instruction set with Plug and Play support (Auto-E-Connect Functions) |
| Versions: | Professional Version / Professional Series |
| Power supply, Supply Voltage: | System supply, 12VDC (1-Wire auxiliary voltage) |
| Connection type: | Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section |
| Dimensions: | 2TE, 32 x 90 x 70mm (LxWxH) |
| Enclosure: | ABS plastic with high percentage of recycled plastic, green (RAL 6020) |
| Colour: | green |
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Accessories
in production
Presence detector Presence sensor Motion detector UP 12V
Presence detector / Presence sensor / Motion detector for flush mounting in ceilings and walls 12V version Sensor for living areas, cars or small solar island systems
Motion and presence detector for indoor applications for automatic control and switching of heating and lighting. The special feature of this presence sensor is that it is operated with low voltage and therefore cannot cause electric shocks.
Sensitivity adjustable to brightness and duty cycle. The sensor can be ideally used with our 1-Wire Digital Input Modules.
Measuring method:
PIR sensor, reacts to heat change
Exit:
12V output if active
Max. Load:
50W inductive, 100W ohmic
Power supply:
12V DC (+/-10%)
Sensitivity
5 Lux-500 Lux
Time delay:
16-180s.
Angle sensor:
140° cone angle
Dimensions:
87 x 87 x 34 mm (WxHxD)
Installation depth:
24mm
Hole opening:
75mm diameter
Scope of delivery:
Sensor, operating instructions
Product number: 20006
Instantly available
Shipping until , if you place your order within the next .
in production
Leak detector Water detector 12V
Prepared for the next flood!
Leakage sensor / water detector to protect against water damage
The leakage sensor reliably detects moisture or water on the floor. The sensor itself is housed in a waterproof housing, so it can "survive" without damage even at higher water levels. The leakage detector can be integrated into a 1-Wire network in combination with our 1-Wire Switch Input Module Art.No. 11214 (not included) . The module can be supplied with 12V voltage from a 1-Wire hub. The switching polarity and sensitivity is adjustable. Typical applications are the detection of liquids due to defective water pipes, defective washing or dishwashing machines and flooding. The relay contact closes when moisture is detected.
Measuring method: Electrolytic AC voltage measurement Evaluation: relay contact (active open or closed) Power supply: 12V AC or DC (+/-10%) / relay contact: max. 30V / 4A Dimensions: 80 x 82 x 58mm Scope of delivery: sensor, operating instructions
Product number: 20005
Instantly available
Shipping until , if you place your order within the next .
in production
Rain sensor
Versions:
12V version
Rain sensor with heater and professional, functionally reliable measuring principle (12V)The large sensor surface reacts to rain or snow. The switching polarity and sensitivity are adjustable. The switchable heating prevents icing or condensation and accelerates drying. In the most sensitive setting, the device is also suitable for detecting fog.
The mast or wall mounting bracket, available as an accessory, enables easy installation. Typical areas of application are in garden centres, in agriculture, in building control systems, but also in the home and garden.
The rain sensor works on the basis of an alternating current measuring system (electrolytic measuring principle). The advantage is that no sensor electrode can degrade and therefore has a significantly higher life expectancy compared to other sensors with direct current measuring principle (as almost 80% of all devices on the market).
The potential-free relay contact closes when rain starts. The relay contact can transmit any voltage, e.g. 12V or 24V, to the evaluation electronics, e.g. an ESERA 1-Wire Digital Input or 1-Wire Switch Input Module.
Measurement procedure:
Electrolytic AC voltage measurement
Evaluation:
- Potential-free changeover relay contact- Active in rain or dew- Contacts are isolated from the rest of the electronics.
Power supply:
12V or 24V AC or DC (+/-10%), depending on version
Power consumption:
approx. 60mA (with heating 80 - 300mA)
Relay contact:
max. 30V / 4A
Dimensions:
80 x 82 x 58mm
Scope of delivery:
Device with instructions, without evaluation electronics, without mounting bracket
Product number: 20002
Instantly available
Shipping until , if you place your order within the next .
Related products
Shipping until
8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 8A 230V - with push-button inputs
8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 8A 230V - with push-button inputs:
This switching module can be used to switch 8 DC or AC consumers via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example.
The module is designed for a load capacity of 8A per channel and a total of 10A continuous current.
Product number: 11220
Instantly available
Shipping until , if you place your order within the next .
Shipping until
High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs
High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs:
With this 8-fold switching module, 8 DC or AC consumers can be switched via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example
The module is designed for a load capacity of 10A per channel (16A for 3 seconds) continuous current. Each channel has a separate current input. This allows you to switch 8 independent circuits with the maximum power of a 10A circuit breaker.
The 8 external push-button inputs and the status of the relay outputs are displayed separately via the 1-Wire interface.
In addition, the status of the relay outputs is displayed via the 1-Wire interface, regardless of whether the relay output was switched via an external button, internal menu or 1-Wire interface.
Product number: 11228
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage.
The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller.
The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function:
Central power supply of the 1-Wire network
1-Wire distribution for several bus sections
LED display for power and 1-Wire activity
Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.
Product number: 11322
Instantly available
Shipping until , if you place your order within the next .
Tip
Shipping until
4-way DI module (digital input) - Push-button/switch interface
The ESI 400 4-fold digital input module makes it easy to query push-buttons, switches or reed contacts (magnetic switches).
For example, the status of doors, windows, fire dampers or a garage door can be recorded by simply installing a reed switch at a suitable location and connecting it to the DI module. The status LED flashes when there are signal changes at the inputs.
Even short switching pulses, e.g. from buttons, are detected by the ESI 400 module and stored until the next readout cycle.
The ESI 400 4-fold DI module can be connected directly to switches or push-buttons. No external power supply is required for the switches. The module can be supplied with a 5V - 12V operating voltage.
Product number: 11235
Instantly available
Shipping until , if you place your order within the next .