PLUG and PLAY
USER FRIENDLY
SECURE
DURABLE
ECO FRIENDLY
Go to homepage
€0.00*

2-fold AO module (analog output) 1-wire leading edge phase control dimmer

2-fold AO module (analog output) 1-wire leading edge phase control dimmer
Quantity Unit price
1 to 49
€130.90*
50 to 99
€124.36*
From 100
€117.81*

Prices excl. VAT plus shipping costs

Instantly available
Shipping until , if you place your order within the next .
piece
Product number: 11221
EAN: 0098931698496
Manufacturer product ID: 11221
Product information "2-fold AO module (analog output) 1-wire leading edge phase control dimmer"

Overview

2-channel 1-wire leading edge phase control dimmer for controlling conventional incandescent lamps, HV and LV halogen lamps (with conventional transformer), dimmable LEDs and inductive loads (e.g. fans)

Description

The brightness of the connected lamps can either be controlled or switched on and off using the touch dimmer function in the living room (extension unit input), via the push-buttons on the top of the module or via the 1-Wire interface. Any push-buttons from all switch ranges can be used for the touch dimmer function. The dimmer response is perceived as very soft and pleasant.
You can change the brightness by pressing and holding the living area or module button. You can switch on or off with a short press of the button.
The touch dimmer function works with a 12VDC/24VDC DC voltage that does not cause any unwanted interference in its surroundings. This makes the Dual Dimmer ideal for low-radiation areas such as bedrooms and living rooms.
In addition to manual control, you also have the option of integrating the leading edge phase control dimmer into your smart home control system. The 1-Wire bus interface is available for this purpose.

This dimmer is suitable for light bulbs, dimmable LEDs, high-voltage halogen lamps (ohmic loads), low-voltage halogen lamps (12VDC) and fans (inductive loads) with corresponding power.
Note: Low-voltage halogen lamps may only be operated in conjunction with a conventionally wound transformer. Not suitable for loads with electronic ballast, energy-saving and fluorescent lamps.

For the living room touch dimmer function, it is sufficient if the dimmer is supplied with the 1-Wire bus voltage (12VDC). This means that the installation in your home is already "smart home ready". This also guarantees that the lighting will work even if the Smart Home control has not yet been programmed or has failed.

Overview of the functions:

  • 2-channel leading edge phase control dimmer with soft start and soft dimming behavior
  • Maximum output power: 460W (460VA); with up to 6 LED lamps max. 200W (200VA)
  • Minimum load 6W (6VA)
  • Optionally 32 levels for gentle or 128 levels for very gentle dimming behavior
  • Saving the last dimming level
  • Data output of the current dimming values
  • Status feedback from the digital inputs (push-button interface)
  • Compatible with all 1-Wire control units.
    Convenient control with the extended range of functions of the ESERA 1-Wire controllers / 1-Wire gateways

Properties

1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Note: In the case of capacitive or inductive loads, appropriate additional circuitry, such as spark suppression capacitors, must be provided. Minimum load 10mA per output The max. current and power are reduced for non-resistive loads.
Number of inputs / outputs:
  • 2 - channel output
  • 2 x push button interface (binary input/pulse input 10-30VDC) to control the outputs
Plug and Play support , Auto-E-Connect Support: Yes
Protection circuit:
  • Signal line overvoltage protection against high voltage faults
  • Signal line overvoltage protection (1-Wire Protector) provides protection against high voltage faults up to 28VDC
  • Overvoltage protection for the voltage supply / power supply
Data interface: Industrial 1-Wire Bus (12V, 1-Wire Data and ground (GND)
1-Wire Interface: DS2408 instruction set with Plug and Play support (Auto-E-Connect Functions)
Versions: Professional Version / Professional Series
Power supply, Supply Voltage: System supply, 12VDC (1-Wire auxiliary voltage)
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Dimensions: 4TE, 70 x 90 x 70mm (LxWxH)
Enclosure: ABS plastic with high percentage of recycled plastic, green (RAL 6020)
Colour: green
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • Protection class II
  • IP20
Temperature range, operation: -5°C to +50°C, standard temperature range
Humidity Operation / Storage: 10% to 92% (non-condensing)
Temperature range, storage: -5°C to +50°C, Standard temperature range
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Design / Manufacturer: ESERA

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 8A 230V - with push-button inputs
Shipping until
8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 8A 230V - with push-button inputs
8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 8A 230V - with push-button inputs: This switching module can be used to switch 8 DC or AC consumers via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example. The module is designed for a load capacity of 8A per channel and a total of 10A continuous current.

From €127.71*

Product number: 11220

Instantly available
Shipping until , if you place your order within the next .
Details
High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs
Shipping until
High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs
High power 8-fold DI/DO (Digital Input/Output) 1-Wire switching module - 16A 230V - with push-button inputs: With this 8-fold switching module, 8 DC or AC consumers can be switched via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example The module is designed for a load capacity of 10A per channel (16A for 3 seconds) continuous current. Each channel has a separate current input. This allows you to switch 8 independent circuits with the maximum power of a 10A circuit breaker. The 8 external push-button inputs and the status of the relay outputs are displayed separately via the 1-Wire interface. In addition, the status of the relay outputs is displayed via the 1-Wire interface, regardless of whether the relay output was switched via an external button, internal menu or 1-Wire interface.

From €143.91*

Product number: 11228

Instantly available
Shipping until , if you place your order within the next .
Details
This website uses cookies to ensure the best experience possible. More information...