1-Wire cable Bus coupler PLC
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€12.90
|
| 50 to 99 |
€12.26
|
| From 100 |
€11.61
|
Product information "1-Wire cable Bus coupler PLC"
Overview
Description
Adapter cable between 1-Wire bus coupler PLC (Part No. 11302-T) and a WAGO® PLC (750-841, 750-881, ...).
The adapter cable is
designed
to connect the 1-wire bus coupler PLC (art.no.11302-T)
and a WAGO® PLC, including models 750-841, 750-881 and other models with configuration and programming interfaces.
The cable is designed for mounting the 1-Wire bus coupler PLC to the left of the PLC.
A description of the library for Codesys (2.3) can be found here.
A description of the connection between the 1-Wire bus coupler and the WAGO PLC controller can be found here.
Connection: 1 x D-SUB9 connector on pin row 4-PIN WAGO assignment (GND, RX and TX signals)
Dimensions: Cable length approx. 15cm
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Accessories
DIN rail adapter between PC and 1-Wire networkIndustrial 1-Wire bus coupler with RS232 (TTL 5V standard) in industrial design with galvanic isolation between the data and 1-Wire bus interface.1-Wire bus coupler RS232 in DIN rail housing. With the 1-Wire Bus Coupler a fast and easy connection between computer and 1-Wire network or to the PLC via a serial terminal is possible.State-of-the-art high-speed optocouplers and DC/DC power supplies are used for safe galvanic isolation. Even the 1-Wire activity LED has an isolated design. The isolation prevents interference to and from the PC and reduces possible "electrosmog" in the building. The isolation also increases electrical safety.For the 1-Wire network, the 5V output voltage is 250mA max.Single 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.LED indicators for power and activity.Note: The data interface is designed as a D-Sub socket.
Product number: 11302-T
Related products
Bluetooth to USB adapter class 1 with up to 150m range The USB to Bluetooth adapter enables wireless data transfer e.g. between a 1-Wire controller and a PC and a mobile phone. - No interference when operating WLAN 802.11 products simultaneously - allows you to build a local network with other compatible Bluetooth devices. bluetooth standard V2.0 EDR, class 1 Reach up to 150 metres Frequency range 2.402 - 2.480GHz, 79 channels Power supply USB bus power Operating system 2000/XP/WIN7/WIN8 Further drivers on the manufacturer's website Scope of delivery USB Bluetooth adapter, driver CD, manual
Product number: 60001
Adapter cable RJ12 to open cable ends. Connection cable between 1-Wire USB adapter DS9490 (1-wire bus master) and 1-wire hub, 1-wire hub III or sensors. Connection: 1 x RJ12 connector on open cable ends (5V, 1-Wire Data, GND) Dimensions: length approx. 2,5m
Product number: 11310
USB cable 2.0 o.5m length, A plug to B plug- 0.5m length- USB 2.0 standard- Color gray, black or transparent - Picture similar
Product number: 43009
Connecting cable RJ12 to RJ12 1.8mThe cable is for connecting two RJ12 1-Wire devices, such as a USB adapter and distributor.Note that the two RJ12 connectors have a rotated pin assignment.Further information about the cable pinout can be found in the download area
Product number: 11311