EOS 100 Multisensor Pro Outdoor

1-Wire Multisensor surface-mounted for temperature, humidity and brightness Standard With the multi-sensor a simple monitoring and recording of the indoor climate is possible. For heating systems (individual room control) and ventilation systems it is an important sensor to achieve a good and stable control of temperature/humidity. The living room sensor is also ideal for warning of possible mould formation. A calibration of the sensors is not necessary. They can be put into operation immediately without waiting time. In addition to the 1-Wire component (DS2438) for detecting humidity, brightness and operating voltage, the Multisensor also includes a high-precision temperature sensor (DS18B20) with a resolution of 12 bit accuracy. The integrated humidity sensor has a high accuracy in the range of 10 - 85% relative humidity. A brightness sensor is used to measure the twilight and brightness values within living spaces. The sensor can be used, for example, for the brightness-guided control of roller shutters or venetian blinds. Assembly: With this Multisensor it is now easy to measure temperature, humidity and brightness via a 1-Wire bus system indoors. Function and application: Temperature sensor DS18B20: -40°C to +60°C, limited by housing (sensor element: -10°C to +125°C) additional DS18B20 temperature sensor Air humidity sensor DS2438: Capacitive sensor, DS2438, 0% to 100% relative humidity. As air humidity sensor a sensor of the manufacturer Honeywell is used. DS2438 light sensor: measuring behaviour simulates the human eye (not UV light). 1-Wire components DS18B20, temperature DS2438 Multisensor for humidity and brightness Temperature sensor DS18B20 Temperature range -40°C to +60°C, limited by housing (sensor element: -10°C to +125°C) Accuracy +/- 0,5° in the range of -10°C - 85°C Resolution 9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution Air humidity sensor Capacitive sensor (Honeywell HIH5000 series) Measuring range humidity 0% to 100% rel. humidity Accuracy +/-3,5 % Repeatability 0,5% Resolution 9 bit, approx. 0.32% humidity Brightness sensor Sensor adjusts the sensitivity of the human eye Measuring range 0 - 7000 lux 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 V= (+10%/-20%) Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery 11132 Sensor module + User Guide Delivery without covers / panels Note for OWFS: The brightness value (xsens) can be read out for the DS2438 in the OWFS directory tree in the "vis" variable.

Elegant multisensor for humidity and temperature Pro for 1-Wire bus systemfor professional applications, e.g. public institutions, authorities, machines etc. Highlights Professional Temperature and humidity sensor for private, schools, public buildings and companiesFull support for ESERA Plug and Play system (Auto-E-Connect)Universal surface mountingElegant and high quality sensor housingSimple power supply (5VDC) Function: With the MSP105 1-Wire Multisensor Pro for temperature and humidity, simple monitoring of the room climate is possible. The MSP105 has an attractive sensor housing (surface mounting). With the help of the air humidity sensor, the humidity conditions in the environment are monitored and a warning could be issued via the evaluation software about possible dangers due to mold growth. The MSP105 Multisensor Pro is an important sensor for heating and ventilation systems and is a main component of a single room control. In combination with 1-Wire switching modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated. Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with article number 11134.

MSP 200, System monitoring per Environment - MultisensorMultisensor Pro 200 for ESERA Data Center environmental measuring system, humidity and temperatureDescription The MSP 200 is an industrial environmental multisensor of the latest generation for building, system and infrastructure monitoring. The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The MSP 200 has power and status LED indicators.The sensor finder LED function allows the sensor to be found quickly in large networks.The ESERA Plug and Play system, called Auto-E-Connect, installs the MSP 200 fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered as a German and European patent by ESERA GmbH.The installation is done in a few minutes by the dual push in connector system.Due to a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.The housing is protected against vandalism and insects.Processing of the sensor values, thus no complex formulas necessaryThe Multisensor Pro 200 for temperature and humidity makes it easy to monitor the indoor climate in data centers.The Multisensor Pro 200 has an attractive white sensor housing for mounting on control cabinet doors or walls.

MSP203 Multisensor Pro Smoke, Humidity and Temperature Highlights: Wall mounting, e.g. in a control cabinet High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low power consumption Processing of the sensor values, therefore no complex formulas necessary Function:With the MSP203 Smoke Sensor you can implement an early warning system for developing fires.The MSP 203 Environment - Multisensor quickly detects smoke / fume and measures temperature, relative humidity and dew point with high accuracy. dew point.The sensor MSP 203 is an industrial environmental multisensor of the newest generation and is designed for control cabinet, system and infrastructure monitoring. monitoring.The sensor has LED indicators for power, status and sensor function.The Sensor Finder LED function allows the sensor to be found quickly in large networks. large networks. Per ESERA Plug and Play System, called Auto-E-Connect, the the MSP 203 is installed fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered by ESERA GmbH as German and European patent pending.The installation is done in a few minutes by the dual RJ45 connector system for patch cables. Due to a sophisticated EMC and grounding concept the environmental multisensor for industrial environments is well prepared for a reliable reliable operation. Horizontal air flow measurement direction, detection of air flow into or out of the control cabinet Intended for mounting on surfaces, e.g. in the control cabinet