1-Wire Multisensor Pro temperature, humidity living room flush-mounted for Berker, Jung, Merten
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€65.90*
|
| 50 to 99 |
€62.61*
|
| From 100 |
€59.31*
|
Instantly available
Shipping until , if you place your order within the next .
Product number:
11160
EAN:
0782321213320
Manufacturer product ID:
11160
Product information "1-Wire Multisensor Pro temperature, humidity living room flush-mounted for Berker, Jung, Merten"
Overview
1-Wire Wohnraumsensor Unterputz Temperatur+Feuchte für Berker, Jung usw.
Description
1-Wire Multisensor Pro flush mount for temperature and humidity
Universal
- With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc.
- You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range.
- The 1-Wire flush-mounted living space sensor is based on a carrier from Berker.
- The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.
|
1-Wire interface |
DS2438 command set for temperature, humidity and operating voltage |
|
Temperature sensor |
Highly accurate temperature sensor |
|
Temperature range |
-40°C to +125°C |
|
Accuracy |
+/- 0.3° in the range of 0°C - 85°C |
|
Resolution |
12 bit, 0.0625°C/bit |
|
Air humidity sensor |
highly accurate humidity sensor |
|
Measuring range humidity |
0% to 100% rel. humidity |
|
Accuracy |
+/- 3% in the range of 5 - 95% relative humidity (non-condensing) |
|
Repeatability |
0,5% |
|
Resolution |
10 bit, approx. 0.32% humidity |
|
1-Wire connection |
3 - conductor connection (data, ground and 5V, parasitic operation not supported) |
|
Operating voltage |
5 VDC +/-20 |
|
Power consumption |
approx. 2 mA |
|
Connection: |
Pressure connection terminal |
|
Dimensions (outside) |
71 x 71 x 37 mm (LxWxH) |
|
Scope of delivery |
Sensor module, central screen (aperture) + operating instructions |
Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.
Properties
| 1-Wire Plug and Play System, Auto-E-Connect Functions: |
|
|---|---|
| Central plate / covers / panels: |
|
| Execution: | 3 pin connector |
| Internal sensors: |
|
| Measurement values: |
|
| Mounting: | inwall mount |
| Note: | Compatibility: Unfortunately the Loxone 1-Wire Extension does not support the functionality of this state of the art sensor. Here we recommend the use of an ECO Controller as interface. |
| Plug and Play support , Auto-E-Connect Support: | Yes |
| Protection circuit: |
|
| Data interface: | Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND)) |
| Function: |
|
| 1-Wire Interface: | DS2438 instruction set with Plug and Play support (Auto-E-Connect Functions) |
| Versions: | Professional Version / Professional Series |
| Power supply, Supply Voltage: | System supply, 5VDC (1-Wire main voltage) |
| Connection type: | Push In terminal block |
| Dimensions: | 71 x 71 x 37 mm (LxWxH) |
| Colour: |
|
| Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
| Temperature range, operation: | -5°C to +50°C, standard temperature range |
| Humidity Operation / Storage: | 10% to 92% (non-condensing) |
| Temperature range, storage: | -5°C to +50°C, Standard temperature range |
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Design / Manufacturer: |
|
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Accessories
Shipping until
MS105 1-Wire Multisensor temperature, humidity living room flush-mounted for Berker, Jung, Merten Kopie
Central plate / covers / panels:
white, surface high gloss, Manufacture Berker
MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal
With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc.
You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range.
The 1-Wire flush-mounted living space sensor is based on a carrier from Berker.
The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.
1-Wire interface
DS2438 command set for temperature, humidity and operating voltage
Temperature sensor
Highly accurate temperature sensor
Temperature range
-40°C to +125°C
Accuracy
+/- 0.3° in the range of 0°C - 85°C
Resolution
12 bit, 0.0625°C/bit
Air humidity sensor
highly accurate humidity sensor
Measuring range humidity
0% to 100% rel. humidity
Accuracy
+/- 3% in the range of 5 - 95% relative humidity (non-condensing)
Repeatability
0,5%
Resolution
10 bit, approx. 0.32% humidity
1-Wire connection
3 - conductor connection (data, ground and 5V, parasitic operation not supported)
Operating voltage
5 VDC +/-20
Power consumption
approx. 2 mA
Connection:
Pressure connection terminal
Dimensions (outside)
71 x 71 x 37 mm (LxWxH)
Scope of delivery
Sensor module, central screen (aperture) + operating instructions
Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.
Variants from €47.61*
Product number: 11132.3
Instantly available
Shipping until , if you place your order within the next .
Shipping until
MS105 1-Wire Multisensor temperature, humidity living room flush-mounted for Berker, Jung, Merten Kopie
Central plate / covers / panels:
White, surface matt, not high gloss, Manufacture Berker
MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal
With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc.
You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range.
The 1-Wire flush-mounted living space sensor is based on a carrier from Berker.
The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.
1-Wire interface
DS2438 command set for temperature, humidity and operating voltage
Temperature sensor
Highly accurate temperature sensor
Temperature range
-40°C to +125°C
Accuracy
+/- 0.3° in the range of 0°C - 85°C
Resolution
12 bit, 0.0625°C/bit
Air humidity sensor
highly accurate humidity sensor
Measuring range humidity
0% to 100% rel. humidity
Accuracy
+/- 3% in the range of 5 - 95% relative humidity (non-condensing)
Repeatability
0,5%
Resolution
10 bit, approx. 0.32% humidity
1-Wire connection
3 - conductor connection (data, ground and 5V, parasitic operation not supported)
Operating voltage
5 VDC +/-20
Power consumption
approx. 2 mA
Connection:
Pressure connection terminal
Dimensions (outside)
71 x 71 x 37 mm (LxWxH)
Scope of delivery
Sensor module, central screen (aperture) + operating instructions
Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.
Variants from €47.61*
Product number: 11132.4
Instantly available
Shipping until , if you place your order within the next .
Shipping until
MS105 1-Wire Multisensor temperature, humidity living room flush-mounted for Berker, Jung, Merten Kopie
Central plate / covers / panels:
without zentral plate
MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal
With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc.
You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range.
The 1-Wire flush-mounted living space sensor is based on a carrier from Berker.
The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.
1-Wire interface
DS2438 command set for temperature, humidity and operating voltage
Temperature sensor
Highly accurate temperature sensor
Temperature range
-40°C to +125°C
Accuracy
+/- 0.3° in the range of 0°C - 85°C
Resolution
12 bit, 0.0625°C/bit
Air humidity sensor
highly accurate humidity sensor
Measuring range humidity
0% to 100% rel. humidity
Accuracy
+/- 3% in the range of 5 - 95% relative humidity (non-condensing)
Repeatability
0,5%
Resolution
10 bit, approx. 0.32% humidity
1-Wire connection
3 - conductor connection (data, ground and 5V, parasitic operation not supported)
Operating voltage
5 VDC +/-20
Power consumption
approx. 2 mA
Connection:
Pressure connection terminal
Dimensions (outside)
71 x 71 x 37 mm (LxWxH)
Scope of delivery
Sensor module, central screen (aperture) + operating instructions
Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.
Product number: 11132
Instantly available
Shipping until , if you place your order within the next .
Related products
Shipping until
Central plate with ventilation slots for 1-Wire sensor UP Berker
Central plate / covers / panels:
white, surface high gloss, Manufacture Berker
High-quality front cover / central plate for 1-Wire UP living space sensors for switch ranges from Berker®
Central plate for 1-Wire UP living area sensors with Berker carrier frameManufacturer: Berker® Version: Front cover / central plate, Series: S1Surface: Polar white glossy or mattScope of delivery: central plate/front cover
Product number: 42302
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Central plate with ventilation slots for 1-Wire sensor UP Berker
Central plate / covers / panels:
White, surface matt, not high gloss, Manufacture Berker
High-quality front cover / central plate for 1-Wire UP living space sensors for switch ranges from Berker®
Central plate for 1-Wire UP living area sensors with Berker carrier frameManufacturer: Berker® Version: Front cover / central plate, Series: S1Surface: Polar white glossy or mattScope of delivery: central plate/front cover
Product number: 42302-2
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Intermediate ring for central disc Berker on standard 55mm for Jung, Merten
Colour:
polar white glossy
High-quality intermediate ring for switch ranges of the manufacturers Berker, Jung, Merten etc.
The adapter frame is necessary for using the 43206 central plate and switch ranges of the manufacturers Berker, Jung, Merten and many other manufacturers Switch ranges with 50mm system
Finish: polar white, glossy
Product number: 42303
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Intermediate ring for central disc Berker on standard 55mm for Jung, Merten
Colour:
polar white matt
High-quality intermediate ring for switch ranges of the manufacturers Berker, Jung, Merten etc.
The adapter frame is necessary for using the 43206 central plate and switch ranges of the manufacturers Berker, Jung, Merten and many other manufacturers Switch ranges with 50mm system
Finish: polar white, glossy
Product number: 42303-2
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Cover frame for 1-Wire flush-mounted living space sensors for switch ranges from Berker
Colour:
polar white glossy
High-quality cover frame for 1-Wire UP living space sensors for switch ranges from Berker®
Frame 1 compartment for 1-Wire UP living space sensors with Berker carrier frameManufacturer: Berker® Design: Cover frame, 1 compartment, Series: S1Surface: Polar white glossy
Product number: 42304
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Cover frame for 1-Wire flush-mounted living space sensors for switch ranges from Berker
Colour:
polar white matt
High-quality cover frame for 1-Wire UP living space sensors for switch ranges from Berker®
Frame 1 compartment for 1-Wire UP living space sensors with Berker carrier frameManufacturer: Berker® Design: Cover frame, 1 compartment, Series: S1Surface: Polar white glossy
Product number: 42304-2
Instantly available
Shipping until , if you place your order within the next .