1-Wire distributor 4 Linear cabling with Push In terminals

MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.