Quantity | Unit price |
---|---|
1 to 49 |
€8.90*
|
50 to 99 |
€8.46*
|
From 100 |
€8.01*
|
Overview
Description
The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors.
The adapter has a RJ45 connector on one side and a Push In terminal for ground, 5V, 12V and 1-Wire data on the other side. It is no longer necessary to remove the existing network connectors. The pin assignment of the RJ45 socket is matched to our 1-Wire Hub RJ45.
Properties
Internal sensors: |
|
---|---|
Mounting: |
|
Number of inputs / outputs: |
|
Plug and Play support , Auto-E-Connect Support: | Yes |
Protection circuit: | Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use |
Data interface: | Industrial 1-Wire bus (12V, 5V, 1-Wire data and ground (GND) |
Function: | 1-Wire-Adapter |
1-Wire Interface: |
|
Versions: | Basic version / Basic series |
Power supply, Supply Voltage: |
|
Connection type: |
|
Dimensions: | 40 x 23 x 18mm (LxWxH) |
Enclosure: | Open housing, open assembly / printed circuit board |
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
Temperature range, operation: | -25°C to +70°C, Extended temperature range 1, (E1) |
Humidity Operation / Storage: | 10% to 92% (non-condensing) |
Temperature range, storage: | -25°C to +70°C, Extended temperature range 1, (E1) |
Scope of delivery: | Device and user manual |
Design / Manufacturer: | ESERA |
Login
Device Documentation | Operating instructions, connection diagram, conformity, ... |
Info Material | Product catalogue, Brochures |
Technical Downloads | Software & co. |
Worth knowing | Wikis, entries, tutorials |