1-Wire distributor LIN 6 with grounding system

Multisensor Pro 100 Outdoor for humidity and temperature The EOS 100 is a professional outdoor multisensor of the latest generation for building, system and infrastructure monitoring.The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The EOS 100 has internal power and status LED indicators. The sensor finder LED function allows the sensor to be found quickly in large networks. TheESERA Plug and Play system, called Auto-E-Connect, installs the EOS 100 fully automatically in ECO controllers. The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered by ESERA GmbH as a German and European patent.The installation is done in a few minutes by Push In connection terminals.With a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.Highlights: Outdoor multisensor, waterproof High measurement accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) LED indicators for power, status and sensor finder Auto-E-Connect functions Processing of sensor values, therefore no complex formulas necessary Shapely industrial housing Universal outdoor sensor for IoT, industry and building automation

Multisensor Pro 100 for ESERA Data Center environmental measuring system, door sensorHumidity and temperature for mounting on control cabinet doors, black version. Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low power consumption Processing of sensor values, therefore no complex formulas necessary Elegant door / wall housing black Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in data centers. The Multisensor Pro 100 has an attractive white sensor housing for mounting on control cabinet doors.

Multisensor Pro 100 for ESERA Data Center Environmental Measurement SystemHumidity and temperature, door sensor,for mounting on control cabinet doors, gray version Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low current consumption Processing of sensor values, therefore no complex formulas necessary Shapely door / wall housing gray Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in the data center. The Multisensor Pro 100 has a shapely white sensor housing for mounting on control cabinet doors

MSP 200, System monitoring per Environment - MultisensorMultisensor Pro 200 for ESERA Data Center environmental measuring system, humidity and temperatureDescription The MSP 200 is an industrial environmental multisensor of the latest generation for building, system and infrastructure monitoring. The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The MSP 200 has power and status LED indicators.The sensor finder LED function allows the sensor to be found quickly in large networks.The ESERA Plug and Play system, called Auto-E-Connect, installs the MSP 200 fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered as a German and European patent by ESERA GmbH.The installation is done in a few minutes by the dual push in connector system.Due to a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.The housing is protected against vandalism and insects.Processing of the sensor values, thus no complex formulas necessaryThe Multisensor Pro 200 for temperature and humidity makes it easy to monitor the indoor climate in data centers.The Multisensor Pro 200 has an attractive white sensor housing for mounting on control cabinet doors or walls.

MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.