ECO 120 Pro central unit Industrial 1-Wire gateway
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€269.90*
|
| 50 to 99 |
€256.41*
|
| From 100 |
€242.91*
|
Instantly available
Shipping until , if you place your order within the next .
Product number:
11606-12
EAN:
0098931699158
Product information "ECO 120 Pro central unit Industrial 1-Wire gateway"
Overview
Industrial 1-Wire gateway central unit for 1-Wire to Ethernet subsystem, autonomous management of 1-Wire sensors (desktop unit)
Description
The 3rd generation of the ECO 120 Pro Industrial 1-Wire Gateway is an ESERA further development of the 1-Wire high-performance sensor interface. It is optimized for operation on your desk as a programming interface or in the laboratory as an innovative measuring system.
Up to 30 sensors can be connected to the ECO 120 PRO fully automatically via the Industrial 1-Wire bus and the Auto-E-Connect Plug and Play system.
The ESERA Auto-E-Connect system is an extension of the 1-Wire bus standard and has been registered as a German and European patent by ESERA GmbH.
A wide range of sensors can be connected via the 1-Wire bus interface: e.g. for temperature, humidity, dew point, air quality (VOC or fine dust), gases (e.g. CO2 or CO) or alarm signaling contacts.
Thanks to the Auto-E-Connect support, product data can be read out from all sensors in real time. Each sensor can provide up to 5 data values. This means that the ECO 120 PRO can provide a maximum of 150 sensor data to your control system or PLC.
The ESERA Config Tool and the ECO-Dashboard 100 provide you with extensive software support.
To ensure continuous and reliable operation in an industrial environment, the ECO 120 PRO is powered by a 12V plug-in power supply unit.
HIGHLIGHTS
- Auto-E-Connect Level I to III: fully automatic plug-and-play system for up to 30 sensors,
Fast readout of all devices in a 2 second cycle - USB 2.0 interface for data, configuration, debug and firmware updates
- Convenient desktop device on rubber feet, with power supply via plug-in power supply unit
- Robust industrial design with extensive bus and device protection,
Suitable for extended temperature range from -5° to 50°C
Optional equipment
- Ultrafast iButton or RFID read function for access or security authentication
- Coated electronics (conformal coating) for high operational reliability under permanently high or strongly fluctuating humidity conditions
- Data logger function for long-term measured value recording or logging
Properties
| Protocols: |
|
|---|---|
| Data interface: | USB 2.0, virtual serial interface (FTDI interface) |
| 1-Wire Interface: |
|
| 1 wire bus, zone, connection: |
|
| Auto-E-Connect Support: |
|
| Power supply, Supply Voltage: | 12VDC |
| Power consumption: | max. 5 Watt at 12 VDC |
| Connection type: |
|
| Dimensions: | 120 x 80 x 35 mm (LxWxH) |
| Enclosure: |
|
| Colour: | silver |
| Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
| Temperature range, operation: | -5°C to +50°C, standard temperature range |
| Humidity Operation / Storage: | 10% to 92% (non-condensing) |
| Temperature range, storage: | -5°C to +50°C, Standard temperature range |
| System clock (RTC): | 24 hours RTC-mode |
| Software version / Support: |
|
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Related products
Tip
Shipping until
ECO 110 Pro central unit, smart building sensor gateway
The ECO 110 Pro central unit, Smart Building is a powerful sensor interface of the latest generation for many smart home and smart building software applications. The gateway has an access point and web server.
Up to 30 sensors can be connected to the ECO 110 Pro fully automatically via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. A wide range of measuring sensors is available, e.g. for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), as well as glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN and via the access point (activation at the touch of a button).
This system was developed as a low-maintenance, industry-standard device, without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system.
HIGHLIGHTS
Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors
Web server and access point for data, configuration, debug and firmware updates
Data interface for MQTT and ASCII
Low-maintenance device in industrial quality, with extensive device protection, suitable for extended temperature range from -5°C to +50°C
Native programming, without Linux and without unknown libraries
Applications
Smart Home and Smart Building: for modern building automation
Sensor interface for many smart home software applications: IP-Symcon, IO-Broker, Home Assistant, openHAB and more
Optional equipment
Ultrafast iButton or RFID Read function for access or security authentication
Secure Boot SSL certificates
Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without teach-in
Product number: 11621-24
Instantly available
Shipping until , if you place your order within the next .
Tip
Shipping until
ECO 160 Pro central unit, Smart Home multi-zone sensor gateway
The ECO 160 Pro central unit, the smart building multi-zone sensor gateway, offers an integrated 1-wire switch for up to three separate 1-wire buses*. It is the central 1-Wire interface in your home and is characterized by its extreme flexibility and powerful sensor and actuator interface of the latest generation. The central unit integrates seamlessly into numerous smart home and smart building software applications.
Cost and time savings thanks to quick installation and commissioning: Connect, switch on and receive measured values.
This gateway is equipped with an access point and a web server. Up to 30 sensors can be connected to the ECO 160 using the Auto-E-Connect plug-and-play system. Flexibly divided into up to 3 separate 1-bus zones*. A wide range of measuring sensors are available, including temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), as well as glass breakage and smoke detectors. All 1-wire sensors and actuators are read out in a 5-second cycle.
The configuration, software updates and sensor production data are conveniently provided via the web server. The intuitive operation of the web server is accessible via LAN and the access point.
Designed as a low-maintenance device according to industry standards, this system was implemented without Linux and with its own native programming. Unknown libraries are not used to ensure stability and reliability. The LAN interface enables 2 data connections via MQTT and the ASCII text protocol. Extensive free software support is available.
HIGHLIGHTS
Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors, can be divided into up to 3 separate bus zones using an integrated 1-wire switch
Web server and access point for data, configuration, debug and firmware updates
Data interface for MQTT, Modbus/TCP and ASCIINatively programmed, without Linux and without unknown libraries
Low-maintenance device in industrial quality, with extensive device protection, suitable for extended temperature range from -5°C to +50°C
Applications
Smart Home and Smart Building: universal sensor and actuator interface for modern building automation
Sensor-actuator interface for various multimedia and smart home software applications: Crestron, IP-Symcon, IO-Broker, Home Assistant, openHAB, NodeRed and many more
Up to 30 sensors can be connected via Plug and Play
Optional equipment
Ultrafast iButton or RFID Read function for access or security authentication
Secure Boot SSL certificates
Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without learning
*1-Wire zones 1 and 2 are currently activated in the scope of delivery. Activation of the 3rd zone requires the purchase of a paid license, which is conveniently available via our webshop. The license can then be imported directly into the gateway online."
Product number: 11623-24
Instantly available
Shipping until , if you place your order within the next .
Accessories
Shipping until
1-Wire distributor 2, RJ12 passive
Passive 1-Wire distributor module with 6 outputs for 1-Wire temperature cable sensors with RJ12 connector. The distributor supplements the existing 1-Wire temperature sensor system based on modular RJ12 connectors, enabling fast and cost-sensitive cabling.
*Push In terminals are screwless terminal connections.
Product number: 11141
Instantly available
Shipping until , if you place your order within the next .
in production
1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology
6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables.
This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over.
You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.
Product number: 11142
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Distributor, Star Topology/Cabling with Push-In Connector, 1-Wire Extender 7
1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy
6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it.
Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.
Product number: 11166
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Power supply 12VDC 1A
Switching power supply 12V 1A, plug-in power supply AC/DC
HNP12-120
Energy-saving plug-in power supply unit for supplying electronic assemblies
- Power supply with European plug - wide range input 100-240VAC - short circuit and overload protection - insulation class 2 (protection class 2)- complies with Energy Star Level IVManufacturer: HN-PowerModel: HNP12Connection: Input: Euro plug, Output: Hollow plug Input: 100-- 240VAC,
Output: 12V, 1A. 12W
Output plug: 2.1 x 5.5 x 10 mm,inside positive, outside negative
Connection: 1,5m Operating temperature: -5...+40°CEfficiency: 70%.
Product number: 61051
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage.
The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller.
The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function:
Central power supply of the 1-Wire network
1-Wire distribution for several bus sections
LED display for power and 1-Wire activity
Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.
Product number: 11322
Instantly available
Shipping until , if you place your order within the next .