The ECO 110 Pro central unit, Smart Building is a powerful sensor interface of the latest generation for many smart home and smart building software applications. The gateway has an access point and web server. Up to 30 sensors can be connected to the ECO 110 Pro fully automatically via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. A wide range of measuring sensors is available, e.g. for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), as well as glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN and via the access point (activation at the touch of a button). This system was developed as a low-maintenance, industry-standard device, without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for MQTT and ASCII Low-maintenance device in industrial quality, with extensive device protection, suitable for extended temperature range from -5°C to +50°C Native programming, without Linux and without unknown libraries Applications Smart Home and Smart Building: for modern building automation Sensor interface for many smart home software applications: IP-Symcon, IO-Broker, Home Assistant, openHAB and more Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Secure Boot SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without teach-in

The 3rd generation of the ECO 120 Pro Industrial 1-Wire Gateway is an ESERA further development of the 1-Wire high-performance sensor interface. It is optimized for operation on your desk as a programming interface or in the laboratory as an innovative measuring system. Up to 30 sensors can be connected to the ECO 120 PRO fully automatically via the Industrial 1-Wire bus and the Auto-E-Connect Plug and Play system. The ESERA Auto-E-Connect system is an extension of the 1-Wire bus standard and has been registered as a German and European patent by ESERA GmbH. A wide range of sensors can be connected via the 1-Wire bus interface: e.g. for temperature, humidity, dew point, air quality (VOC or fine dust), gases (e.g. CO2 or CO) or alarm signaling contacts. Thanks to the Auto-E-Connect support, product data can be read out from all sensors in real time. Each sensor can provide up to 5 data values. This means that the ECO 120 PRO can provide a maximum of 150 sensor data to your control system or PLC. The ESERA Config Tool and the ECO-Dashboard 100 provide you with extensive software support. To ensure continuous and reliable operation in an industrial environment, the ECO 120 PRO is powered by a 12V plug-in power supply unit. HIGHLIGHTS Auto-E-Connect Level I to III: fully automatic plug-and-play system for up to 30 sensors, Fast readout of all devices in a 2 second cycle USB 2.0 interface for data, configuration, debug and firmware updates Convenient desktop device on rubber feet, with power supply via plug-in power supply unit Robust industrial design with extensive bus and device protection, Suitable for extended temperature range from -5° to 50°C Optional equipment Ultrafast iButton or RFID read function for access or security authentication Coated electronics (conformal coating) for high operational reliability under permanently high or strongly fluctuating humidity conditions Data logger function for long-term measured value recording or logging

The ECO 160 Pro central unit, the smart building multi-zone sensor gateway, offers an integrated 1-wire switch for up to three separate 1-wire buses*. It is the central 1-Wire interface in your home and is characterized by its extreme flexibility and powerful sensor and actuator interface of the latest generation. The central unit integrates seamlessly into numerous smart home and smart building software applications. Cost and time savings thanks to quick installation and commissioning: Connect, switch on and receive measured values. This gateway is equipped with an access point and a web server. Up to 30 sensors can be connected to the ECO 160 using the Auto-E-Connect plug-and-play system. Flexibly divided into up to 3 separate 1-bus zones*. A wide range of measuring sensors are available, including temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), as well as glass breakage and smoke detectors. All 1-wire sensors and actuators are read out in a 5-second cycle. The configuration, software updates and sensor production data are conveniently provided via the web server. The intuitive operation of the web server is accessible via LAN and the access point. Designed as a low-maintenance device according to industry standards, this system was implemented without Linux and with its own native programming. Unknown libraries are not used to ensure stability and reliability. The LAN interface enables 2 data connections via MQTT and the ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors, can be divided into up to 3 separate bus zones using an integrated 1-wire switch Web server and access point for data, configuration, debug and firmware updates Data interface for MQTT, Modbus/TCP and ASCIINatively programmed, without Linux and without unknown libraries Low-maintenance device in industrial quality, with extensive device protection, suitable for extended temperature range from -5°C to +50°C Applications Smart Home and Smart Building: universal sensor and actuator interface for modern building automation Sensor-actuator interface for various multimedia and smart home software applications: Crestron, IP-Symcon, IO-Broker, Home Assistant, openHAB, NodeRed and many more Up to 30 sensors can be connected via Plug and Play Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Secure Boot SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without learning *1-Wire zones 1 and 2 are currently activated in the scope of delivery. Activation of the 3rd zone requires the purchase of a paid license, which is conveniently available via our webshop. The license can then be imported directly into the gateway online."