Adapter cable between 1-Wire bus coupler PLC (Part No. 11302-T) and a WAGO® PLC (750-841, 750-881, ...). The adapter cable is designed to connect the 1-wire bus coupler PLC (art.no.11302-T) and a WAGO® PLC, including models 750-841, 750-881 and other models with configuration and programming interfaces. The cable is designed for mounting the 1-Wire bus coupler PLC to the left of the PLC.A description of the library for Codesys (2.3) can be found here.A description of the connection between the 1-Wire bus coupler and the WAGO PLC controller can be found here. Connection: 1 x D-SUB9 connector on pin row 4-PIN WAGO assignment (GND, RX and TX signals) Dimensions: Cable length approx. 15cm

3 different coloured cables (flexible), each 2 m long. Colours: red, black, white for wiring of 1-Wire modules Design: Cable (flexible) 0,5qmm length: each colour 2m Colours: red, black, white

5 different coloured wires (YV wire), each 5 m long. Colours: red, black, blue, green, yellow for wiring of 1-Wire modules in the control cabinetDesign: wire (YV) 0.5qmm Length: 5m each colourColours: red, black, blue, green, yellow

Connecting cable RJ12 to RJ12 1.8mThe cable is for connecting two RJ12 1-Wire devices, such as a USB adapter and distributor.Note that the two RJ12 connectors have a rotated pin assignment.Further information about the cable pinout can be found in the download area

Thermal actuator 230V for radiators and floor heating systems Normally closed (M30 x 1.5) Extremely compact design. Quick and easy to install due to very slim design  

Adapter cable RJ12 to open cable ends. Connection cable between 1-Wire USB adapter DS9490 (1-wire bus master) and 1-wire hub, 1-wire hub III or sensors. Connection: 1 x RJ12 connector on open cable ends (5V, 1-Wire Data, GND) Dimensions: length approx. 2,5m

AKZ terminals 250V 2/3 pole green Manufacturer designation: AKZ 700Board clamp for all top-hat rail modules, including- 1-Wire 8-fold switch module 230V 5A (11206)- 1-Wire shutter control (11209)- 1-Wire dual switch module 230V 5A (11204-R) Nominal voltage (EN 60998): 250V AC rated current (T60): 24A Test voltage: 2kV Nominal cross section solid: 4.0mm2 Nominal cross section finely stranded: 2.5mm2 Stripping length: 8,0mm Insulating body: PA Temperature range: -30...+105°C Burning behaviour: UL94V-0 Color: green Dimensions: 2-pole 3-pole 10.16x19x10.5 (LxHxD) 15.24x19x10.5 (LxHxD) Grid dimension 5,08mm   Quantity discount: as of 10 pieces 5%. Figure is similar. Decisive are the product specifications of the respective manufacturer (e.g. data sheet). errors & changes of the product description are reserved at any time.

AR terminals 250V 2/3pol greenManufacturer`s designationn: CII5.08 Board terminal for all sensor housings, including:- 1-Wire temperature sensor (11101-S)- 1-Wire - 1 Wire temperature-humidity sensor (11102) - 1 Wire air quality sensor (11110) Nominal voltage (EN 60998): 250V AC Rated current (T60): 14A Test voltage: 2kV Nominal cross section solid: 0,2...2,5mm2 Nominal cross section finely stranded: 0,2...1,5mm2 stripping length: 6.0mm temperature range: -30...+105°C Burning behaviour: UL94V-0 colour: green Dimensions: 2-pole 3-pole 10x10x8.1 (LxHxD) 15x10x8.1 (LxHxD) Grid dimension 5.08mm   Quantity discount: as of 10 pieces 5%. Figure is similar. Decisive are the product specifications of the respective manufacturer (e.g. data sheet). errors & changes of the product description are reserved at any time.

Sensor cable in PUR version (polyurethane) for all sensors indoors and outdoors, e.g. for sensors in the area of sauna, fireplace, stoves or solar systems 3x0,5qmm rust redPicture: 5m cable length Polyurethane cables are used wherever the interaction of high temperature differences and high mechanical load capacity make or damage conventional PVC-insulated cables brittle or brittle. For example, as power cables or sensor cables in the garden, outdoors (e.g. roof), in ships and airplanes, in heating, cooling and air conditioning technology, in lighting fixtures, etc. Connection cable especially for all types of sensors in outdoor areas. The UV-, weather-, oil-resistant, abrasion- and cut-resistant polyurethane jacket allows the use especially in industrial environments and for outdoor use. Cable design: 4x0,5qmm, PUR-cable, fine wire Assembly: 3xnumber cable + 1 x green/yellow, fine wire Cable color: Orange Cable diameter: Outer - Ø 7,2 mm Manufacturer's designation: Polyurethane cable Temperature range: Installed on the move: -40 - +90°C, permanently installed: -50 - +90°C Cable lengths: 5m, 10m, 25m and on request

Silicone cable Temperature resistant for all sensors indoors and outdoors, e.g. for sensors in saunas, fireplaces, ovens or solar systems 3x0,5qmm rust red Picture: 5m cable length Silicone-insulated cables are used wherever the interaction of high temperature differences or heat makes conventional PVC-insulated cables brittle or fragile. For example as power cable or sensor cable in sauna construction, in ships and airplanes, in heating, cooling and air conditioning technology, in lighting fixtures etc. The silicone cable is halogen-free and resistant to vegetable and animal fats, many oils and diluted acids as well as decomposition by alcohols, plasticizers, alkalis, salt solutions, etc. Cable outlet: 3x0,75qmm, silicone cable, fine wire Assembly: 2xcoloured (blue, brown) + 1 x green/yellow, fine wire Cable color: Rust red Cable diameter: Outer-Ø 6,0 mm Manufacturer's designation: Silicone cable SIHF-J Temperature range: Installed on the move: -40 - +120°C, permanently installed: -60 - +180°C       Cable lengths: 5m, 10m, 25m and on request

D-SUB extension cable 1,8m DSUB 9 extension cable plug to socket. Serial extension cable to connect the Edip-Display adapter to the computer. With this cable the Edip Display can be programmed via RS232. Connection: D-SUB 9Pol plug to socket Accessories: RS232 plug-socket adapter cable Dimensions: length approx. 1,8m

D-SUB extension cable 1,8m DSUB 9 extension cable plug to socket. Serial extension cable to connect the Edip-Display adapter to the computer. With this cable the Edip Display can be programmed via RS232. Connection: DSUB 9Pol plug socket Accessories: RS232 plug socket adapter cable Dimensions: length approx. 3,0m

Ethernet injector RJ45 for power supply of a device via CAT cablePower over Ethernet for 10/100 MBit CAT cable Can be used e.g. for- 1-Wire controller 1 Ethernet- eBus Coupler Ethernet- 1-Wire Bus Coupler Ethernet Cable length: approx. 15cm eachColour: WhiteScope of delivery: 2 x injector cables (input and output) without power supply unit.

The reed contact / magnetic contact is used as opening detector for monitoring doors, housings, windows and for smart home systems. The housing variants of the magnetic switch incl. the magnet as built-in and surface-mounted version allow an optimal adaptation to the object to be protected. It is suitable for both recessed and surface mounting. As protection against sabotage (bridging protection) a connection cable with four wires of the same colour is used. The surface-mounted housings are designed so that the contact can be installed in both directions. To ensure magnetic decoupling in the case of ferromagnetic objects, or to compensate for any height compensation, spacer blocks are supplied with the surface-mounted version. It can be mounted on a door frame, a window block or on the standing surface of an object to be monitored in such a way that an alarm is triggered if it is opened or lifted by more than 2 cm. VdS:     VdSClass B                       according to VdS GmbH (Damage prevention GmbH) Material:                      PA Magnet:                       Diameter 6 mm x 19 mm Neodymium, axially polarized Protection class:          IP 67 Connection cable:       4-core Cable length:               5 m LIYY ZGL 4 x 0.14 mm² Cu tin-plated LSA insulation,displacement technology suitable. Dimensions (WxHxD): 35 x 10 x 10 mm Color:                           white Contact type:               1 - pole NO contact Contact dimensions:    6 x 19mm Mounting flange:          6x6 / 10 mm for magnet and contact; for wood,  plastic, aluminium and non-magnetic metals  

USB cable 2.0 o.5m length, A plug to B plug- 0.5m length- USB 2.0 standard- Color gray, black or transparent - Picture similar

Consists of master and remote unit - max. distance 45 m via Cat 5/6/7 network cable - USB 1.1 standard - no external power supply required - connections master unit: connection cable 10 cm with USB plug A, RJ45 socket - connections remote unit: connection cable 10 cm with USB socket A, RJ45 socket   Further information, like program examples, data sheets or drivers can be found in our download area

Bluetooth to USB adapter class 1 with up to 150m range The USB to Bluetooth adapter enables wireless data transfer e.g. between a 1-Wire controller and a PC and a mobile phone. - No interference when operating WLAN 802.11 products simultaneously - allows you to build a local network with other compatible Bluetooth devices. bluetooth standard V2.0 EDR, class 1 Reach up to 150 metres Frequency range 2.402 - 2.480GHz, 79 channels Power supply USB bus power Operating system 2000/XP/WIN7/WIN8 Further drivers on the manufacturer's website Scope of delivery USB Bluetooth adapter, driver CD, manual