AKZ terminals 250V 2 or 3-pole green
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€0.90
|
| 50 to 99 |
€0.86
|
| From 100 |
€0.81
|
Product information "AKZ terminals 250V 2 or 3-pole green"
Overview
Description
AKZ terminals 250V 2/3 pole green
Manufacturer designation: AKZ 700
Board clamp for all top-hat rail modules, including
- 1-Wire 8-fold switch module 230V 5A (11206)
- 1-Wire shutter control (11209)
- 1-Wire dual switch module 230V 5A (11204-R)
| Nominal voltage (EN 60998): | 250V AC |
| rated current (T60): | 24A |
| Test voltage: | 2kV |
| Nominal cross section solid: | 4.0mm2 |
| Nominal cross section finely stranded: | 2.5mm2 |
| Stripping length: | 8,0mm |
| Insulating body: | PA |
| Temperature range: | -30...+105°C |
| Burning behaviour: | UL94V-0 |
| Color: | green |
| Dimensions: 2-pole 3-pole |
10.16x19x10.5 (LxHxD) |
| 15.24x19x10.5 (LxHxD) | |
| Grid dimension | 5,08mm |
Quantity discount: as of 10 pieces 5%.
Figure is similar.
Decisive are the product specifications of the respective manufacturer (e.g. data sheet). errors & changes of the product description are reserved at any time.
Properties
| Insulator: | PA |
|---|---|
| Nominal cross-section: |
|
| Nominal voltage: | 250V AC (EN 60998) |
| Pitch: | 5,08mm |
| Rated current (T60): | 24A |
| Testing voltage: | 2 KV |
| Dimensions: |
|
| Colour: | green |
| Temperature range, operation: | -30°C to +105°C |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Accessories
1-Wire Hub II AC with integrated power supply unit unpopulated printed circuit board for the construction of a 1-Wire Hub II AC. The 1-Wire Hub II AC is the central module for building a 1-Wire network. Combination with all 1-Wire devices possible. Designed for control cabinet installation (top hat rail mounting). Via the 1-Wire hub the 1-Wire bus is supplied with 5V and 12V voltage. If the output power of the 1-Wire hub is not sufficient, additional power can be supplied by an external power supply (15V - 24V). Options:- Voltage monitoring of the 5V and 12V voltages by 1-Wire - Voltage and current monitoring of the 5V and 12V by 1-Wire Supply voltage 230VAC Output 5V 0.1A, 12V 0.2A (sum of 5V and 12V 4.5W) LED indicator 5V voltage, 1-Wire activity Dimensions 85 x 77mm, intended for HUT4 top hat rail housing Connection Screw connection Scope of delivery Unassembled board in industrial quality without components or housing. Building instructions per download Note: SMD components must be soldered on the board, depending on the assembly option.
Product number: 11812
1-Wire Dual Digital Input, Board Unassembled printed circuit board for the construction of a 1-Wire digital input. With the 1-Wire dual digital input module two inputs can be monitored independently of each other. A pump or lamp can be monitored as an example. The inputs are connected in parallel to the consumer to be monitored. The dual input module is designed for three variants:- 230V AC voltage - 24V DC voltage - 5V DC voltageConnection: screw terminals for 1-wire bus and input voltageSupply voltage: 1-Wire bus with 5V and 12VCurrent consumption: 5V approx.1mA, 12V approx. 5mA (both inputs active)Installation: Designed for control cabinet installation (top hat rail)Protection class: IIAssessories: Top hat rail housing (HUT 2)Scope of delivery: Unassembled board in industrial quality without components or housing. Building instructions per downloadNote: Small SMD components must be soldered on the board.
Product number: 11800
1-Wire Dual Reed contact module, board Unassembled printed circuit board for the assembly of a 1-Wire dual reed contact module.With the 1-Wire Dual Reed Contact Sensor Module two independent reed contacts (magnetic switches) can be monitored.The sensor can be used, for example, to monitor a window, door or garage door. 1-Wire interface DS2413 Dual I/O Dimensions 85,8x30,5mm Connection Screw terminals for 1-Wire bus and input voltage (up to 2.5qmm possible) Supply voltage 1-Wire Bus with 5V and 12V Power consumption 5V approx. 1mA, 12V approx. 5mA (both inputs active) Isolation Inputs electrically connected with 1-Wire bus Installation intended for top hat rail housing (switch cabinet installation) Scope of delivery Unassembled board in industrial quality without components or housing.Building instructions per download Cable length between sensor and module It is recommended to use max. 10m cable length. Labelling CE Protection class III Note: SMD components must be soldered on the board
Product number: 11809