1-Wire Dual Digital Input, Board
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€8.90
|
| 50 to 99 |
€8.46
|
| From 100 |
€8.01
|
Currently not available, please sign up to get notified
Product information "1-Wire Dual Digital Input, Board"
Overview
Description
1-Wire Dual Digital Input, Board
Unassembled printed circuit board for the construction of a 1-Wire digital input.
With the 1-Wire dual digital input module two inputs can be monitored independently of each other.
A pump or lamp can be monitored as an example.
The inputs are connected in parallel to the consumer to be monitored.
The dual input module is designed for three variants:
- 230V AC voltage
- 24V DC voltage
- 5V DC voltage
Connection: screw terminals for 1-wire bus and input voltage
Supply voltage: 1-Wire bus with 5V and 12V
Current consumption: 5V approx.1mA, 12V approx. 5mA (both inputs active)
Installation: Designed for control cabinet installation (top hat rail)
Protection class: II
Assessories: Top hat rail housing (HUT 2)
Scope of delivery: Unassembled board in industrial quality without components or housing. Building instructions per download
Note: Small SMD components must be soldered on the board
.
Properties
| Mounting: | Intended for control cabinet installation (top-hat rail). |
|---|---|
| Power consumption: | 5V approx. 1mA, 12V approx. 5mA (both inputs active) |
| Power supply, Supply Voltage: |
|
| Connection type: | 1-Wire via screw terminals, PC connection depending on version |
| Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): | Protection class II |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Accessories
1-Wire Dual Digital I/O Chip Actuator for 2 channel digital input or output Temperature range: -55 to +85°C- Supply voltage: 2.8V - 5.25VHousing: TOSC 8 Type :DS2413P+PIO Pins Support 20mA max Continuous Current Sink - Supports 28V (max) PIO Pin Operating Voltage - On-Resistance of PIO Pulldown Transistor 20mA, max; OFF Resistance 1MOhm - Parasitic Power Supply Through 1-Wire
Product number: 42004
Currently not available, please sign up to get notified
AKZ terminals 250V 2/3 pole green Manufacturer designation: AKZ 700Board clamp for all top-hat rail modules, including- 1-Wire 8-fold switch module 230V 5A (11206)- 1-Wire shutter control (11209)- 1-Wire dual switch module 230V 5A (11204-R) Nominal voltage (EN 60998): 250V AC rated current (T60): 24A Test voltage: 2kV Nominal cross section solid: 4.0mm2 Nominal cross section finely stranded: 2.5mm2 Stripping length: 8,0mm Insulating body: PA Temperature range: -30...+105°C Burning behaviour: UL94V-0 Color: green Dimensions: 2-pole 3-pole 10.16x19x10.5 (LxHxD) 15.24x19x10.5 (LxHxD) Grid dimension 5,08mm Quantity discount: as of 10 pieces 5%. Figure is similar. Decisive are the product specifications of the respective manufacturer (e.g. data sheet). errors & changes of the product description are reserved at any time.
Product number: 42602-2M
Currently not available, please sign up to get notified