AR terminals 250V 2 or 3 pole green

1-Wire 3-fold analog input, 0- 5V or 0 - 10V(Unassembled printed circuit board for the construction of a 1-Wire 3-fold analog input) With the 1-Wire analog input module, three DC voltage sources can be measured independently of each other. As an example, pressure sensors, brightness sensors or other transducers can be read in. The inputs are not isolated from the 1-wire bus and have a ground potential. The module is only intended for the connection of isolated DC voltage sources.The measuring inputs have reverse polarity protection, overvoltage protection and input filters. The measuring range (0-5VDC or 0-10VDC) can be switched by software. number of channels 3 Measuring input 0-5VDC or 0-10VDC Input resistance Input resistance 200k Supply voltage 5V and 12V Power consumption approx. 15mA (all inputs active) Connection Screw terminals for 1-Wire bus and input voltage Isolation No isolation between input and 1-Wire bus Installation Designed for installation in DIN rail housing and control cabinet installation 1-Wire device DS2450(4-fold analog input) Protection class III Scope of delivery Unassembled board in industrial quality without components or housing. Building instructions per download Note: SMD components must be soldered on the board.  

1-Wire Hub II AC with integrated power supply unit unpopulated printed circuit board for the construction of a 1-Wire Hub II AC. The 1-Wire Hub II AC is the central module for building a 1-Wire network. Combination with all 1-Wire devices possible. Designed for control cabinet installation (top hat rail mounting). Via the 1-Wire hub the 1-Wire bus is supplied with 5V and 12V voltage. If the output power of the 1-Wire hub is not sufficient, additional power can be supplied by an external power supply (15V - 24V). Options:- Voltage monitoring of the 5V and 12V voltages by 1-Wire - Voltage and current monitoring of the 5V and 12V by 1-Wire Supply voltage 230VAC Output 5V 0.1A, 12V 0.2A (sum of 5V and 12V 4.5W) LED indicator 5V voltage, 1-Wire activity Dimensions 85 x 77mm, intended for HUT4 top hat rail housing Connection Screw connection Scope of delivery Unassembled board in industrial quality without components or housing. Building instructions per download Note: SMD components must be soldered on the board, depending on the assembly option.

1-Wire 8-Fach Schaltmodul, Leiterplatte ohne Bauteile Unbestückte Leiterplatte zum Aufbau eines 1-Wire 8-Fach Schaltmoduls. Mit dem 1-Wire 8-Fach Schaltmodul können 8 Gleich- oder Wechselspannungsverbraucher geschaltet werden. Das Gerät ist in zwei Gruppen zu je 4 Kanälen aufgebaut. Jede Gruppe hat einen getrennten Stromeingang, der mit  je 5A abgesichert ist. Anzahl Kanäle 8 Schaltstrom 5A pro Ausgang, maximal 5A pro 4-Fachgruppe Schaltspannung Gleich- oder Wechselspannung bis 230V Einbau Für Hutschienengehäuse und Schaltschrankeinbau vorgesehen Anschluß Schraubklemmen für 1-Wire Bus und Schaltkontakte (bis 2,5qmm möglich) Absicherung Sicherungen innenliegend,  2 x Micro Fuse 5A/T Versorgungsspannung 5V und 12V Stromaufnahme 5V ca. 1mA, 12V ca. 100mA (alle Ausgänge aktiv) Schutzklasse II Lieferumfang Unbestückte Platine in Industriequalität ohne Bauteile oder Gehäuse. Bauanleitung per Download Hinweis: Auf der Platine müssen SMD-Bauteile gelötet werden.