1-Wire Analog Input, Board
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€8.90*
|
| 50 to 99 |
€8.46*
|
| From 100 |
€8.01*
|
Overview
Description
1-Wire 3-fold analog input, 0- 5V or 0 - 10V
(Unassembled printed circuit board for the construction of a 1-Wire 3-fold analog input)
With the 1-Wire analog input module, three DC voltage sources can be measured independently of each other.
As an example, pressure sensors, brightness sensors or other transducers can be read in.
The inputs are not isolated from the 1-wire bus and have a ground potential.
The module is only intended for the connection of isolated DC voltage sources.
The measuring inputs have reverse polarity protection, overvoltage protection and input filters.
The measuring range (0-5VDC or 0-10VDC) can be switched by software.
| number of channels | 3 |
| Measuring input | 0-5VDC or 0-10VDC |
| Input resistance | Input resistance 200k |
| Supply voltage | 5V and 12V |
| Power consumption | approx. 15mA (all inputs active) |
| Connection | Screw terminals for 1-Wire bus and input voltage |
| Isolation | No isolation between input and 1-Wire bus |
| Installation | Designed for installation in DIN rail housing and control cabinet installation |
| 1-Wire device | DS2450(4-fold analog input) |
| Protection class | III |
| Scope of delivery | Unassembled board in industrial quality without components or housing. Building instructions per download |
Note: SMD components must be soldered on the board.
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Accessories
Product number: 42614-2M