Power supply - 1-Wire Hub
The 1-Wire Hubs (IV DC or III DC) are the central modules to build a 1-Wire Network.
Application:
- They supply 1-Wire components with 5VDC and 12VDC voltage, which decouples the voltage of the 1-Wire input and distributes the 1-Wire data line.
- The hubs can be ideally combined with a 1-Wire Bus Coupler (USB, Ethernet or serial) or 1-Wire Controller 1 and 1-Wire Controller 2.
- The input voltage of the 1-Wire Hubs is specially designed for system environments with DC voltage supply, such as PLC control systems.
Equipment / Function:
- Central power supply of the 1-Wire Network and 1-Wire Distribution
- LED display for power and 1-Wire activity
1-Wire Repeater for long cable strands
The 1-Wire Repeater is used for amplification or regeneration of data signals in 1-Wire Networks.
Application:
- By using repeaters, a 1-Wire Network can be expanded and a significant increase in network stability can be achieved.
- Especially recommended for networks with "star structure".
Equipment Function:
- The repeater is simply switched into a 1-Wire cable.
- No software is required for the 1-Wire Repeater.
1-Wire Hub III DC, central power supply
From
€70.11*
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage.
The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller.
The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function:
Central power supply of the 1-Wire network
1-Wire distribution for several bus sections
LED display for power and 1-Wire activity
Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.
Product number: 11322
Available, delivery time 1-5 days, depending on the carrier
1-Wire Repeater V2
From
€44.01*
Repeater V2 (signal amplifier) for 1-Wire networks
New, reinforced version!
features:
The repeater is used for amplification or regeneration of data signals in 1-Wire networks.
By using repeaters, a 1-Wire network can be expanded and a significant increase in network stability can be achieved. Especially recommended for networks with "star structure". (More about the 1-Wire topology can be found here)
The repeater is simply connected in a 1-Wire cable. No software required.
It supports all types of 1-Wire masters, such as USB adapter, 1-Wire bus coupler or solution with microcontroller with 5V signal level. The repeater is simply connected to the data, ground and 5V supply line of an existing 1-Wire network. The 12V voltage is led past the repeater. No additional power supply or configuration is required for the repeater.
Function
Signal amplifier for 1-Wire network, preferred for long label lines
input and output
5V, 1-Wire data and ground (GND)
Power supply
5VDC/approx. 15mA
Dimensions
17 x 90 x 70mm (WxHxD), intended for top hat rail housing
Connection
Screw terminals
Scope of delivery
Module and operating instructions
Product number: 11318
Available, delivery time 1-5 days, depending on the carrier
1-Wire Term 1
From
€27.81*
Active termination for 1-Wire networks
In a 1-Wire network, the 1-Wire Term 1 provides a defined termination at the end of the 1-Wire network, thus ensuring a stable and professional 1-Wire network. The 1-Wire Term 1 is therefore a basic component of every 1-Wire network. The module contains a passive and active terminating resistor and a signaling of bus activity. The active termination (1-Wire Term 1) is highly recommended to increase the maximum line length and improve the system stability of the 1-Wire network, especially for long 1-Wire lines and for a star or tree topology setup.
In a 1-Wire network, up to 3 1-Wire Term 1 modules can be connected.
The 1-Wire Term 1 is very compact and can be ideally installed in a flush-mounted box.
Function
Termination for 1-Wire networks, active
Channel
1 channel
Operating voltage
5VDC, max. 5mA
Display
2, LED for power and 1-Wire data
Miscellaneous
Integrated overvoltage and reverse polarity protection
Dimensions
40x40x25mm (LxWxH)
Scope of delivery
Module and operating instructions
Integration into 1-Wire network
The 1-Wire Term 1 module is mounted at the end of a 1-Wire network cable. If the 1-Wire network is star-shaped, i.e. with several 1-Wire cable sections, a 1-Wire Term 1 module should be connected to each end. You should not use more than three 1-Wire Term 1 modules in a 1-Wire network.
Linear Topology
The structure corresponds to the linear topology with the difference that the slaves are connected to the main line via cables with a length of more than 3m (branch, stub).
Star or tree topology
The network is divided into several large strings at or near the 1-Wire bus coupler / 1-Wire controller /1-Wire hub (bus master). Sensors and actuators (e.g. switching modules) are connected at the end or along the respective string.
For more information, please refer to the operating instructions under Links/Downloads.
Product number: 11355
Available, delivery time 1-5 days, depending on the carrier