Quantity | Unit price |
---|---|
1 to 49 |
€48.90*
|
50 to 99 |
€46.46*
|
From 100 |
€44.01*
|
Overview
Description
Repeater V2 (signal amplifier) for 1-Wire networks
New, reinforced version!
features:
- The repeater is used for amplification or regeneration of data signals in 1-Wire networks.
- By using repeaters, a 1-Wire network can be expanded and a significant increase in network stability can be achieved. Especially recommended for networks with "star structure". (More about the 1-Wire topology can be found here)
- The repeater is simply connected in a 1-Wire cable. No software required.
It supports all types of 1-Wire masters, such as USB adapter, 1-Wire bus coupler or solution with microcontroller with 5V signal level. The
repeater is simply connected to the data, ground and 5V supply line of an existing 1-Wire network. The 12V voltage is led past the repeater.
No additional power supply or configuration is required for the repeater.
Function | Signal amplifier for 1-Wire network, preferred for long label lines |
input and output | 5V, 1-Wire data and ground (GND) |
Power supply | 5VDC/approx. 15mA |
Dimensions | 17 x 90 x 70mm (WxHxD), intended for top hat rail housing |
Connection | Screw terminals |
Scope of delivery | Module and operating instructions |
Properties
Execution: | 3 pin connector |
---|---|
Internal sensors: |
|
Mounting: | DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is |
Number of inputs / outputs: |
|
Plug and Play support , Auto-E-Connect Support: | No |
Protection circuit: |
|
Data interface: | Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND)) |
Function: | Signal amplifier for 1-Wire network, preferred for long label runs |
1-Wire Interface: | Standard 1-Wire bus functions |
Versions: | Basic version / Basic series |
Power supply, Supply Voltage: | System supply, 5VDC (1-Wire main voltage) |
Power consumption: | 0.1W, 20mA at 5V |
Connection type: | Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section |
Dimensions: | 1TE, 17 x 90 x 70mm (LxWxH) |
Enclosure: | ABS plastic with high percentage of recycled plastic, green (RAL 6020) |
Colour: | green |
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
Temperature range, operation: | -25°C to +70°C, Extended temperature range 1, (E1) |
Humidity Operation / Storage: | 10% to 92% (non-condensing) |
Temperature range, storage: | -25°C to +70°C, Extended temperature range 1, (E1) |
Software version / Support: | without software |
Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
Design / Manufacturer: | ESERA |
Login
February 4, 2014 20:55 Karl-Heinz
meine 1-wire problem mit einem...
meine 1-wire problem mit einem cuno sind mit diesem repeater behoben. kabelläne über 25m sind kein problem.
Device Documentation | Operating instructions, connection diagram, conformity, ... |
Info Material | Product catalogue, Brochures |
Technical Downloads | Software & co. |
Worth knowing | Wikis, entries, tutorials |