Distributors and adapters for 1-Wire bus, star and linear topology

Shipping until

1-Wire adapter 1, RJ12 to push-in terminals

Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Instantly available

Shipping until , if you place your order within the next .

Details

in production

1-Wire adapter 2, RJ45 to push-in terminals

The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors. The 1-Wire Adapter 2 has the RJ45 socket with the pin assignment for CAT network cables on the input side and the push-in terminals for earth, 5V, 12V and 1-Wire Data on the output side. It is no longer necessary to remove the existing network connectors.

From €8.01*

Product number: 11124

Currently not available, please sign up to get notified

Details

Shipping until

1-Wire distributor 1, RJ45 passive

Passive 1-wire distributor with 6 outputs on RJ45 modular sockets Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-Wire cabling system based on network cables. This enables fast and cost-sensitive cabling.

From €28.71*

Product number: 11140

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 2, RJ12 passive

Passive 1-Wire distributor module with 6 outputs for 1-Wire temperature cable sensors with RJ12 connector. The distributor supplements the existing 1-Wire temperature sensor system based on modular RJ12 connectors, enabling fast and cost-sensitive cabling. *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 3, star-bus topology with push-in terminals

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology with 6 outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 4, linear bus topology with push-in terminals

1-Wire distributor for cabling 1-Wire sensors in linear bus topology with 6 outputs on push-in terminals* plus one RJ45 modular socket Distribution module for simple cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Intended for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This enables fast and cost-sensitive cabling. Thanks to the use of push-in clamps, you do not need a screwdriver for installation. The days of screws coming loose are also over. You can connect several 1-Wire distributors 4 to other 1-Wire distributors quickly and easily using a network patch cable. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections

From €29.61*

Product number: 11162

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 6, linear bus topology with push-in connector

The 1-Wire distributor 6 Professional offers an efficient solution for the linear cabling of 1-Wire sensors in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributors 6 LIN linearly with each other via system cable. The distributor is compatible with the existing ESERA cabling systems

From €38.69*

Product number: 11164

Instantly available

Shipping until , if you place your order within the next .

Details

in production

1-Wire distributor 7, star-bus topology with push-in connector

The 1-Wire distributor 7 Professional offers an efficient solution for star-shaped cabling of 1-Wire sensors and actuators in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributor 7s together in a star configuration using system cables. The distributor is compatible with existing ESERA cabling systems.

From €38.69*

Product number: 11166

Currently not available, please sign up to get notified

Details

Shipping until

DS18B20 1-Wire Temp Sensor

DS18B20, 1-Wire Temperature Sensor Temperature sensor with high accuracyTemperature range: -55 - +125°CSupply voltage: 3 - 5.5VHousing: TO 92Accuracy: ±0.5°C from -10°C to +85°CHint: We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €4.41*

Product number: 42000

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

DS2401 1-Wire Serial Chip

DS2401+, 1-Wire Serial Number Module DS2401 Silicone Serial Number Function: Serial number module for 1-Wire bus Housing: TO92 Supply voltage: 2.8V to 5.5V For further data please refer to the data sheet (Download) Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €1.71*

Product number: 42001

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

DS2406 1-Wire Dual Addressable Switch Plus 1Kb Memory

DS2406+, 1-Wire Dual Switch with 1K memory DS2406 Dual Addressable Switch Plus 1Kb Memory Function: 1 channel I/O module for 1-Wire bus Housing: TO92 Supply voltage: 2.8V to 5.5V Switching voltage/current max. 13V, max. 0.1A For further data please refer to the data sheet Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €5.31*

Product number: 42002

Instantly available

Shipping until , if you place your order within the next .

Details

in production

DS2408S+ 1-Wire 8-Fach Digital I/O Chip

DS2408, 1-wire 8-fold digital I/O module Dallas Addressable 8-Port Switch, switching module for 8-fold digital input or digital outputTemperature range: -40°C to +85°C Supply voltage: 2.8V to 5.25VType: DS2408S+ Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €8.01*

Product number: 42003

Currently not available, please sign up to get notified

Details

Shipping until

DS2413 1-Wire Dual I/O Chip

1-Wire Dual Digital I/O Chip Actuator for 2 channel digital input or output Temperature range: -55 to +85°C- Supply voltage: 2.8V - 5.25VHousing: TOSC 8 Type :DS2413P+PIO Pins Support 20mA max Continuous Current Sink - Supports 28V (max) PIO Pin Operating Voltage - On-Resistance of PIO Pulldown Transistor 20mA, max; OFF Resistance 1MOhm - Parasitic Power Supply Through 1-Wire

From €3.51*

Product number: 42004

Instantly available

Shipping until , if you place your order within the next .

Details

in production

DS2423 1-wire dual counter / counter module

DS2423 1-Wire Dual Counter Module / DS2423 1-Wire Dual Counter Function: Dual counter module for 1-Wire network 2x 32Bit counter Housing: 6-pin TSOC SMD Housing Supply voltage: 2.8V to 5.25V Module not resettable. For further data please refer to the data sheet Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €13.41*

Product number: 42005

Currently not available, please sign up to get notified

Details

Shipping until

DS2438 Batterie-Management Smart Battery Monitor

1-Wire Battery Management Smart Battery Monitor with Temp Sensor Type/designation DS2438Z+ Housing SOIC-8 (SMD) Supply voltage 2.4 V to 10 V Function Temperature sensor Analog Input 0-10VDC (VAD) Analog Input 0-250mV, +/- (Xsens) Measurement Operating voltage (VDD) Operating temperature -40°C to +85°C Details See data sheet The DS2438 is a Smart Battery Monitor and is used in its original function as a mobile phone battery monitor. For automation, especially in the smart home area, it is also used for other functions: as voltage meter (supplies the bus voltage (VDD) as thermometer - the temperature is measured AD-Converter (VAD) - is used to measure humidity or brightness Current input (XSENS) - freely available Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €8.91*

Product number: 42006

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

DS2480 1-Wire Serial Line Driver

DS2480B+ Bus master, serial to 1-Wire deviceDS2480B+ Serial 1-Wire Line Driver with Load Sensor Function: Bus master serial for 1-Wire with load sensor Housing: TO 8 Supply voltage: 2.8V to 5.25V For further data please refer to the data sheet Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €5.31*

Product number: 42008

Instantly available

Shipping until , if you place your order within the next .

Details