HDR60-24 DIn rail power supply unit 24V 60W black

The ECO 531 central device/gateway is a modern system bus interface for the comprehensive monitoring and control of systems. It integrates up to 30 sensors and actuators via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. The ECO central units are low-maintenance industrial devices that have been the standard for 1-Wire bus systems for over 10 years, offer stability and meet a high "security by design" standard. The gateway can be controlled in parallel by PLC controllers, cloud applications and text protocols through BMS and media control systems. The simple installation of complex networks is facilitated by the integrated 1-Wire Zone feature. ESERA offers a wide range of sensors and actuators for the gateway. User-friendliness is reflected in the intuitive and simple configuration, software updates and provision of data via the web server, accessible via LAN or the access point that can be activated at the touch of a button. HIGHLIGHTS Three 1-wire bus zones, fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -20°C to 50°C Applications Suitable for complex 1-wire networks: Industrial plants Mechanical engineering Building management, IoT and M2M, silo monitoring Energy optimization in many application areas, can be used regardless of manufacturer Optional equipment Ultrafast iButton or RFID Read function for access or security authentication TPM (Trusted Platform Module) hardware for secure boot and SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

The ECO 501 central unit is a powerful industrial 1-wire sensor gateway of the latest generation for plant and system monitoring. The gateway has an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically via the 1-Wire bus using the Auto-E-Connect plug-and-play system. A wide range of measurement sensors are available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), as well as glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server, which can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown librariesDevice security through secure boot and updates with encrypted SSL certificate Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization an branding possible

The ECO 503 Pro central unit, Industrial Ethernet/LAN switching actuator can be used as an IT switching actuator, IoT cloud switching module and industrial LAN relay module. The switching actuator offers a high switching capacity of 8x16A* and can therefore control complete luminous flux circuits, larger machine or luminaire groups (without dimmers). The integrated high-performance relays can be controlled either by software commands or by 8 digital inputs. The digital inputs are designed for operation with a low voltage of 10-30 VDC and are optimized for push-button operation. The ECO503 central unit supports 4 data protocols: Modbus/TCP, ASCII text, MQTT (with optional SSL encryption). These protocols can communicate in parallel on up to 4 data channels. The device has a web server for switching, configuration and firmware updates. The web server can be accessed via LAN or the access point (activated at the touch of a button). The ECO 503 switching actuator was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which ensures the stability and reliability of the system. Extensive free software support is available. The ECO 503 Pro central processing unit offers a wide range of possible uses and can be seamlessly integrated into various control and automation technology applications. *Note: The specification "8x16A" means that the switching actuator has a total of 8 outputs, each of which can switch a maximum current of 16 amps. HIGHLIGHTS 8 High-performance switching channels (up to 10/16A* switching current), 8 digital inputs for direct control of the switching channels Web server and LAN interface/access point for data, configuration, debug and firmware updates Multi-protocol capable: HTML, Modbus/TCP, MQTT and ASCII Robust and low-maintenance industrial design, can be used for the extended temperature range from -5°C to 50°C regardless of manufacturer Native programming: without Linux and without unknown libraries Cost savings thanks to simple installation and fast commissioning Applications Industrial plant and machinery Smart Building IoT and M2M applications Energy optimization for all consumers, rooms and buildings through central control Switching/control of loads up to 16Amp switching current (switching channels are separately fused) Optional equipment Personalization and branding possible Basis for extensions, e.g. more channels, analog in/out, energy detection, etc.

The ECO 502 central processing unit is a powerful industrial 1-Wire sensor gateway of the latest generation for plant and system system monitoring. The gateway is equipped with an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically to the 1-Wire bus via the Auto-E-Connect plug-and-play system. A wide range of measurement sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), additionally for glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device, without Linux and with its own native programming. was implemented. No unknown libraries are used, which ensures the stability stability and reliability of the system. The WLAN and LAN interface can be used for communication with up to 3 data connections via Modbus/TCP, MQTT, ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -5°C to 50°C Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

eBus Coupler Serial RS232: the data interface to the eBus via the serial RS232 for PC, Raspberry Pi and co. Application The eBus coupler enables read and write access to the eBus of your heating system. By using the appropriate software, you can analyze data from your heating system and send new values to your heating control system via the eBus. Features The ESERA eBus coupler is equipped with galvanic isolation between the eBus and PC interface. The eBus input is bipolar, so you do not need to pay attention to the polarity of the eBus when connecting. As a data interface to your PC, the eBus coupler is equipped with a serial interface in accordance with the V24 standard. No drivers for Windows, Linux etc. are required. The housing of the eBus coupler is designed for switch cabinet installation. Notes The eBus coupler is not supported by the Vaillant vrDIALOG software. We recommend the use of a high-quality industrial power supply unit for a reliable and long-term power supply without faults. Examples of eBus applications can be found under the DOWNLOAD tab and click here or the project Fhem hier

The ECO 304 eBus Gateway is a powerful interface of the latest generation between your heating system and the ebusd* software, which you can use to read and write to your heating system, regardless of the manufacturer, and thus carry out optimizations. The gateway has been optimized for communication with the "ebusd "* software. The enhanced command set (Enhanced Mode) of ebusd* is supported. In addition to the eBus functions, the eBus gateway also has an access point and web server for simple operation and configuration. The LAN interface can be used to communicate with up to 2 data connections via ASCII text protocol. The ECO 304 is a new eBus coupler with a standard 2400 baud data interface, plus an "Enhanced Mode" extension. The gateway performs a fully automatic level adjustment on your eBus in just a few seconds. A cumbersome, manual adjustment is no longer necessary. The ECO 304 does not carry out any data analysis or evaluation itself. The device settings can be conveniently changed, software updates carried out and device data viewed via the web server. The web server can be accessed via LAN and via AccessPoint (activation at the touch of a button). This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. Extensive software support is available via ebusd** on the web. We provide the eConfig-Tool software free of charge for debugging and configuration. The ECO 304 is not supported by the Vaillant vrDIALOG software. * depending on the software, programming and control ** ebusd is not software from ESERA GmbH. We assume no liability whatsoever with regard to functional reliability and no support for this software HIGHLIGTHS Optimized gateway solution for ebusd**, supports reading and writing via the eBus interface of your heating system. Manufacturer-independent plug-and-play system with automatic eBus level adjustment for easy integration. Integrated web server and access point for uncomplicated configuration, debugging and firmware updates Low-maintenance and reliable thanks to native programming without the use of Linux or unknown libraries. Robust industrial design with extensive protective circuits for increased device protection, including simple mounting on a top-hat rail (2TE, 32mm). Up to 25% reduction in heating costs and increased living comfort Equipment options Customization and branding possible, please contact us at info@esera.de Application examples  "Home Assistant" (link: https://github.com/john30/ebusd/wiki) Home-Assistant "FHEM" (link: http://www.fhemwiki.de/wiki/EBUS#Software)  FHEM IP-Symcon ebusd module: (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ ) IPS ebus VMMon from Alexey Ozerov (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ )  VWMon

eBus coupler Ethernet: the data interface to the eBus via Ethernet/LAN for PC, Raspberry Pi and co. Application The eBus coupler enables read and write access to the eBus of your heating system. By using the appropriate software, you can analyze data from your heating system and send new values to your heating control system via the eBus. Features The ESERA eBus coupler is equipped with galvanic isolation between the eBus and PC interface. The eBus input is bipolar, so you do not need to pay attention to the polarity of the eBus when connecting. The eBus coupler is equipped with an Ethernet interface as a data interface to your PC. Drivers are available for Windows operating systems. The housing of the eBus coupler is designed for switch cabinet installation Notes The eBus coupler is not supported by the Vaillant vrDIALOG software. We recommend using the UDP protocol, as this results in low latency times for data transmission Examples (VWMon from Alexey Ozerov) for reading out eBus data you will find, among other things hier or the project Fhem click here

The ECO 305 eBus Gateway is a powerful interface of the latest generation between your heating system and the ebusd* software, which you can use to read and write to your heating system, regardless of the manufacturer, and thus carry out optimizations. The gateway has been optimized for communication with the "ebusd "* software. The enhanced command set (Enhanced Mode) of ebusd* is supported. In addition to the eBus functions, the eBus gateway also has an access point and web server for simple operation and configuration. The LAN interface can be used to communicate with up to 2 data connections via ASCII text protocol. The ECO 305 is a new eBus coupler with a standard 2400 baud data interface, plus an "Enhanced Mode" extension. The gateway performs a fully automatic level adjustment on your eBus in just a few seconds. A cumbersome, manual adjustment is no longer necessary. The ECO 305 does not carry out any data analysis or evaluation itself. The device settings can be conveniently changed, software updates carried out and device data viewed via the web server. The web server can be accessed via LAN and via AccessPoint (activation at the touch of a button). This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. Extensive software support is available via ebusd** on the web. We provide the eConfig-Tool software free of charge for debugging and configuration. The ECO 305 is not supported by the Vaillant vrDIALOG software. * depending on the software, programming and control ** ebusd is not software from ESERA GmbH. We assume no liability whatsoever with regard to functional reliability and no support for this software HIGHLIGTHS Optimized gateway solution for ebusd**, supports reading and writing via the eBus interface of your heating system. Manufacturer-independent plug-and-play system with automatic eBus level adjustment for easy integration. Integrated web server and access point for uncomplicated configuration, debugging and firmware updates Low-maintenance and reliable thanks to native programming without the use of Linux or unknown libraries. Robust industrial design with extensive protective circuits for increased device protection, including simple mounting on a top-hat rail (4TE, 77mm). Up to 25% reduction in heating costs and increased living comfort Equipment options Customization and branding possible, please contact us at info@esera.de Application examples  "Home Assistant" (link: https://github.com/john30/ebusd/wiki) Home-Assistant "FHEM" (link: http://www.fhemwiki.de/wiki/EBUS#Software)  FHEM IP-Symcon ebusd module: (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ ) IPS ebus VMMon from Alexey Ozerov (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ )  VWMon

DIN rail power supply 115/230V according to 24V 15Wl Meanwell HDR series Energy-saving and narrow low-power power supply unit for supplying ESERA devices. - Space-saving and narrow DIN rail unit- - Mains input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)