The EC 1 central unit is designed for the autonomous management of a 1-Wire network. The user does not have to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators). The central processing unit evaluates the sensor and actuator data internally and outputs it cyclically (1-2 sec.) in plain text once converted (e.g. for temperature sensors in C°). In addition, the article number for ESERA modules can be entered; the calculation and output are adapted to the function of the module A wide range of sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm contacts, glass breakage and smoke detectors The 1-Wire interface of the sensor gateway of the EC 1 central unit is designed so that both small and large 1-Wire networks with long cable runs can be set up safely. The 1-Wire sensors can be operated simultaneously in mixed parasitic* or normal mode. The currently most powerful 1-Wire interface for maximum data security has also been installed for complex network structures. The EC 1 Smart Home sensor gateway has a wide-range input of 9 - 30VDC for the power supply. It is therefore equally suitable for 12VDC and the industry-typical 24VDC supply voltages. Accessories such as top-hat rails and plug-in power supply units: see homepage. HIGHLIGTHS Low-cost entry-level module with functionalities of the professional ECO gateway central units Intuitive operation via web server functionality Data interface for Modbus/TCP, MQTT and ASCII LAN interface for data, configuration, debug and firmware updates ESERA-patented Auto-E-Connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming. Customizations and branding possible

The EC 2 central processing unit is designed for demanding applications for autonomous management of a 1-Wire network. You no longer need to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators). The EC 2 Sensor Gateway outputs the sensor and actuator data ready prepared cyclically, e.g. for temperature sensors in C°. For scaling, it is only necessary to divide by 100. The article number for ESERA modules can also be entered; the calculation and output are adapted to the function of the module The 1-Wire interface of the EC 2 Sensor Gateway is specially designed to safely operate even large 1-Wire networks with long cable runs. Mixed 1-Wire sensors can be operated simultaneously in parasitic or normal mode. The most powerful 1-Wire interface currently available has been installed for maximum data security, even for complex network structures. DATA LOGGER (OPTIONAL): If the data connection to the host system is interrupted, no measured values are lost. The EC2 central unit contains a data logger for storing the sensor data. The current time is also saved to ensure that the data is saved at the correct time The EC 2 central unit has a wide-range input of 15 - 30VDC for the power supply and is equally suitable for smart home and typical industrial 24VDC supplies. You can find suitable DIN rail power supplies in our webshop HIGHLIGTHS Intelligent interface to many smart home devices and software solutions; expandable via ESERA 1-wire-hub, therefore also suitable for large networks Optional: data logging in case of communication interruption to the host systemData interface for Modbus/TCP, MQTT and ASCIILAN interface for data, configuration, debug and firmware updates Digital inputs/outputs with additional push-button interface, analog output ESERA-patented Auo-e-connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming. Customizations and branding possible