Electricity meter three-phase current
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€70.90
|
| 50 to 49 |
€70.90
|
| 50 to 99 |
€67.36
|
| 100 to 99 |
€67.36
|
| 100 to 100 |
€63.81
|
| From 100 |
€63.81
|
Available, delivery time: 1-5 days, depending on the carrier
Product information "Electricity meter three-phase current"
Overview
Description
Three-phase meter with analog display for top-hat rail
With this three-phase meter you can monitor and measure the electricity consumption of large consumers, a house or an apartment.
The S0 output impulses can e.g. be recorded by 1-Wire S0 meters and evaluated by software.
The three-phase meter is intended for installation in the fuse box on the house or apartment and must be installed by a qualified electrician in accordance with the applicable regulations.
| Measuring current range | 3 x 10(63) A |
| Voltage range |
3 x 230 / 400 VAC, 50 / 60Hz |
| Display |
Analogue 6+1 (=999999.9 kWh), counter reading is maintained even when no current is applied |
| Design |
Meter according to IEC62051-11 2003, IEC62053-21 2003 |
| Accuracy class | 1 |
| Power consumption | >= 10VA (2W) |
| Pulse output S0 | Optically decoupled, 5 - 27V and max. 27mA |
| Resolution | 800 pulses / kWh = 1 pulse / Watt |
| S0 connection cable | max. 20m |
| Display LED | LED flashes red when power consumption |
| Operating temperature range | -20°C to +45°C |
| Assembly | Top hat rail mounting 122mm / TE (DIN 43880) |
| Dimensions incl. cover caps | 7 TE, 118 x 122 x 63mm (LxWxD) |
| Dimensions without cover caps | 91 x 122 x 63mm (LxWxD) |
| Connection | Screw terminals for wires up to 16mm² |
| Scope of delivery | Electricity meter and data sheet |
When connected, the covers over the terminals must be kept closed!
Technical changes and errors excepted.
Properties
| Accuracy class: | 1 |
|---|---|
| Execution: | Meter according to IEC62051-11 2003, IEC62053-21 2003 |
| Measuring current range: | 3 x 10(63) A |
| Mounting: | Top hat rail mounting 122mm / TE (DIN 43880) |
| Pulse output S0: | Optically decoupled, 5 - 27V and max. 27mA |
| Resolution: | 800 pulses / kWh = 1 pulse / watt |
| S0 connection cable: | max. 20m |
| Voltage range: | 3 x 230 / 400 VAC, 50 / 60 Hz |
| Power consumption: | >= 10VA (2W) |
| Connection type: | Screw terminals for conductors up to 16mm² |
| Dimensions: |
|
| Temperature range, operation: | -20°C to +45°C |
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Display type: | Analog 6+1 (=9999.9 kWh), counter reading is retained even when no power is supplied |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Accessories
Electronic single-phase alternating current meter Electronic alternating current meter with analogue display for DIN top-hat rail. The electricity meter is designed for quick snap-in mounting on DIN top-hat rails and is therefore ideal for monitoring the consumed KWh in houses, apartments or individual devices in almost all installation cabinets and electrical boxes. The S0 output pulses can be evaluated e.g. by a 1-Wire S0 counter.Top hat rail mounting 18mm / TE (DIN 43880), screw terminal connections for conductors up to 16qmm Voltage range Nominal 230VAC (184V to 265V), 50 - 60Hz Measuring current range 0.02A (type) up to 32A Display 5 digits for kilowatt hours and 2 decimal places Accuracy class 1 Resolution S0 1000 pulses / kWh = 1 pulse / Watt Pulse output S0 Optically decoupled, 5 - 27V and max. 27mA Operating temperature range -20°C to +65°C Power consumption 8VA < 0.4W Dimensions incl. cover caps 118 x 18 x 63mm (LxWxD) Dimensions without cover caps 91 x 18 x 63mm (LxWxD) Scope of delivery Electricity meter Note:When connected, the covers over the terminals must be kept closed.The AC meter is intended for installation in the fuse box and must be installed by a qualified electrician in accordance with the applicable regulations.Technical changes and errors excepted.
Product number: 96001
Available, delivery time: 1-5 days, depending on the carrier
Related products
The 1-Wire meter module is suitable for recording energy from two independent electricity, water and gas meters. The metering pulses of a wind turbine can also be recorded. In principle, all S0 devices manufactured in accordance with DIN 43864 with an insulated S0 interface can be connected to the module. The counted pulse levels are retained for several days due to the internal voltage buffering and can be read out with a time delay via the 1-Wire bus. A maintenance-free GoldCap (high-performance capacitor) is integrated to buffer the meter values.
Product number: 11211
Available, delivery time: 1-5 days, depending on the carrier