2-fold DI counter module (Digital Input S0 Counter)

Quantity	Unit price
1 to 49	€65.90*
50 to 99	€62.61*
From 100	€59.31*

Prices excl. VAT plus shipping costs

2 Reviews

Instantly available

Shipping until , if you place your order within the next .

piece

Product number: 11211

EAN: 0782321213399

Manufacturer product ID: 11211

Product information "2-fold DI counter module (Digital Input S0 Counter)"

Overview

1-Wire S0 meter module for recording energy from two independent electricity, water or gas meters in accordance with DIN43864. Also suitable for wind turbine pulse generators.

Description

The 1-Wire meter module is suitable for recording energy from two independent electricity, water and gas meters. The metering pulses of a wind turbine can also be recorded.
In principle, all S0 devices manufactured in accordance with DIN 43864 with an insulated S0 interface can be connected to the module.
The counted pulse levels are retained for several days due to the internal voltage buffering and can be read out with a time delay via the 1-Wire bus.
A maintenance-free GoldCap (high-performance capacitor) is integrated to buffer the meter values.

Properties

1-Wire Plug and Play System, Auto-E-Connect Functions:	Automatic library mapping: The appropriate library is mapped fully automatically for the sensor Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function Classes Assignment: Output OWD sensor class via ECO controller Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Execution:	3 pin connector
Mounting:	DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Number of inputs / outputs:	2 - channel input
Plug and Play support , Auto-E-Connect Support:	Yes
Protection circuit:	Reverse polarity protection for voltage supply / power supply Enhanced ESD protection with ±4kV according to IEC 61000-4 Signal line overvoltage protection (1-Wire Protector) provides protection against high voltage faults up to 28VDC
Data interface:	Industrial 1-Wire Bus (12V, 1-Wire Data and ground (GND)
Function:	Sensoric
1-Wire Interface:	DS2438 instruction set with Plug and Play support (Auto-E-Connect Functions)
Versions:	Professional Version / Professional Series
Power supply, Supply Voltage:	System supply, 12VDC (1-Wire auxiliary voltage)
Power consumption:	0.1W, 20mA at 5V
Connection type:	Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Dimensions:	1TE, 17 x 90 x 70mm (LxWxH)
Enclosure:	ABS plastic with high percentage of recycled plastic, green (RAL 6020)
Colour:	green
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):	Protection class III IP20
Temperature range, operation:	-5°C to +50°C, standard temperature range
Humidity Operation / Storage:	10% to 92% (non-condensing)
Temperature range, storage:	-5°C to +50°C, Standard temperature range
Scope of delivery:	Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Design / Manufacturer:	ESERA

2 of 2 reviews

5 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Sort by

June 5, 2014 22:51 Lars

Sehr kleiner Bauraum, hochwer...

Sehr kleiner Bauraum, hochwertige Verarbeitung, Bei mir in Verbindung mit dem LAN-Controller im Einsatz. Arbeitet zuverlässig ohne Wartung

October 23, 2014 13:40 Frank

funktioniert prima mit IP-Symc...

funktioniert prima mit IP-Symcon, lese damit Windstärke und Wasserverbrauch aus. Die neue Variante ist platzsparender und benötigt keine 12V mehr, prima

Device Documentation	Operating instructions, connection diagram, conformity, ...
Info Material	Product catalogue, Brochures
Technical Downloads	Software & co.
Worth knowing	Wikis, entries, tutorials

Accessories

Shipping until

Electricity meter alternating current

Electronic single-phase alternating current meter Electronic alternating current meter with analogue display for DIN top-hat rail. The electricity meter is designed for quick snap-in mounting on DIN top-hat rails and is therefore ideal for monitoring the consumed KWh in houses, apartments or individual devices in almost all installation cabinets and electrical boxes. The S0 output pulses can be evaluated e.g. by a 1-Wire S0 counter.Top hat rail mounting 18mm / TE (DIN 43880), screw terminal connections for conductors up to 16qmm Voltage range Nominal 230VAC (184V to 265V), 50 - 60Hz Measuring current range 0.02A (type) up to 32A Display 5 digits for kilowatt hours and 2 decimal places Accuracy class 1 Resolution S0 1000 pulses / kWh = 1 pulse / Watt Pulse output S0 Optically decoupled, 5 - 27V and max. 27mA Operating temperature range -20°C to +65°C Power consumption 8VA < 0.4W Dimensions incl. cover caps 118 x 18 x 63mm (LxWxD) Dimensions without cover caps 91 x 18 x 63mm (LxWxD) Scope of delivery Electricity meter Note:When connected, the covers over the terminals must be kept closed.The AC meter is intended for installation in the fuse box and must be installed by a qualified electrician in accordance with the applicable regulations.Technical changes and errors excepted.

From €23.31*

Product number: 96001

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

Finder 32A Alternating current meter MID

Electronic single-phase alternating current meter MIDFinder 32A alternating current meter MID (7E.13.8.230.00x0) Electronic active current meter from the manufacturer Finder with calibration (MID) with analogue display for 35mm DIN top-hat rail. The electricity meter is designed for quick snap-in mounting on DIN top-hat rails and is therefore ideal for monitoring the consumed electricity in houses, apartments or individual devices in almost all installation cabinets and electrical boxes. Electricity meters according to EN 62053-21 and EN 50470Type approval by PTB (7E.13, 7E.16) (Physikalisch - Technische Bundesanstalt)High resistance to magnetic and mechanical manipulation With SO interface according to DIN 43864 for connection to central tariff devices and for energy management With backstop Sealable with cap as accessory The S0 output pulses can be evaluated e.g. by a 1-Wire S0 counter. The AC meter is intended for installation in the fuse box and must be installed by a qualified electrician in accordance with the applicable regulations. Top hat rail mounting 18mm / TE (DIN 43880), screw terminal connections for conductors up to 16qmm Display: 6 digits for kilowatt hours and 1 decimal placeVoltage range: nominal 230VAC (184V to 265V) Measuring current range: 0,02A (typ) to 32A Limit current LED Display: 2000 Impulse /KW/h Resolution S0: 1000 pulses / KWh = 1 pulse / Watt Pulse output S0: max. 27V and max. 27mA Operating frequency range: 40Hz to 60Hz Operating temperature range: -20°C to + 65°C Dimensions incl. cover caps: 118 x18 x 63mm (LxWxD) Dimensions without cover caps: 91 x 18 x 63mm (LxWxD)Technical changes and errors excepted.

From €69.21*

Product number: 96010

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

Electricity meter three-phase current

Three-phase meter with analog display for top-hat rail With this three-phase meter you can monitor and measure the electricity consumption of large consumers, a house or an apartment. The S0 output impulses can e.g. be recorded by 1-Wire S0 meters and evaluated by software. The three-phase meter is intended for installation in the fuse box on the house or apartment and must be installed by a qualified electrician in accordance with the applicable regulations. Measuring current range 3 x 10(63) A Voltage range 3 x 230 / 400 VAC, 50 / 60Hz Display Analogue 6+1 (=999999.9 kWh), counter reading is maintained even when no current is applied Design Meter according to IEC62051-11 2003, IEC62053-21 2003 Accuracy class 1 Power consumption >= 10VA (2W) Pulse output S0 Optically decoupled, 5 - 27V and max. 27mA Resolution 800 pulses / kWh = 1 pulse / Watt S0 connection cable max. 20m Display LED LED flashes red when power consumption Operating temperature range -20°C to +45°C Assembly Top hat rail mounting 122mm / TE (DIN 43880) Dimensions incl. cover caps 7 TE, 118 x 122 x 63mm (LxWxD) Dimensions without cover caps 91 x 122 x 63mm (LxWxD) Connection Screw terminals for wires up to 16mm² Scope of delivery Electricity meter and data sheet When connected, the covers over the terminals must be kept closed! Technical changes and errors excepted.

From €63.81*

Product number: 96002

Instantly available

Shipping until , if you place your order within the next .

Details