Temperature sensor cable LC 1-Wire 1,8m
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€9.90
|
| 50 to 99 |
€9.41
|
| From 100 |
€8.91
|
Available, delivery time: 1-5 days, depending on the carrier
Product information "Temperature sensor cable LC 1-Wire 1,8m"
Overview
Description
Low-cost 1-wire temperature sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends.
The sensors are suitable for measuring outdoors, on surfaces or in non-aggressive gases. The sensors are not waterproof. The temperature sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers or 1-Wire hubs. It is also compatible with many other controllers.
Application
Contact sensor for heating systems, outdoor sensor
Note:
We recommend connecting a 0.1µF capacitor (ceramic) in parallel with the 1-Wire module, i.e. connecting +5V to GND. The capacitor should be placed as close as possible to increase the stability of the entire 1-Wire network.
Properties
| Accuracy: | +/- 0.5° in the range of -10°C - 85°C |
|---|---|
| Pinout: | Red = +5V, Black = GND, Yellow = Data |
| Resolution: | 9 - 12 bits, 0.5°C - 0.0625°C/bit depending on the selected resolution |
| Function: | Temperature sensor |
| 1-Wire Interface: |
|
| 1 wire bus, zone, connection: | 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) |
| Power supply, Supply Voltage: | Voltage supply 2.8VDC to 5.5VDC |
| Connection type: | Open cable ends |
| Dimensions: | 6 X 40 mm (LxW), molded |
| Enclosure: | Stainless steel sleeve , alloy 1.4303, cast |
| Colour: | silver |
| Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
| Software version / Support: | without software |
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Related products
This high-quality and robust 1-wire temperature sensor with M10 screw-in sleeve represents our top class of industrial sensors. Equipped with a stainless steel sleeve and an oil-resistant, shielded PUR connection cable fitted with an RJ11/RJ12 modular plug, this sensor ensures reliable performance under the most extreme conditions. The temperature measurement range extends from -55 °C to +125 °C, making the sensor ideal for continuous use both outdoors and in all other environments. Thanks to IP68 certification, the sensor is completely waterproof and suitable for permanent use under water. The components manufactured in Germany ensure the highest quality and durability. An integrated decoupling capacitor optimizes the measuring accuracy, which makes this temperature sensor particularly suitable for professional applications. For further information, especially on the subject of decoupling or blocking capacitors, please refer to our detailed eBook. Application examples Temperature measurement of hot water storage tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Suitable for temperature detection in harsh and conditionally aggressive environments Connection To connect the temperature sensors, we recommend the 1-Wire distributor, art. no. 11141 or the 1-Wire adapter, art. no. 11118 The temperature sensor can be integrated directly into the 1-Wire network on one of our 1-Wire bus couplers or a suitable 1-Wire hub Note: the sensor cannot be connected directly to the 1-Wire USB adapter or the 1-Wire hub RJ45, as the pin assignments are different here. Design 1-wire temperature sensor with PU connection cable and M10 screw-in sensor. Special lengths and other designs are also available on request.
Product number: 11107
Available, delivery time: 1-5 days, depending on the carrier
Low-cost 1-wire temperature sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends. The sensors are suitable for measuring outdoors, on surfaces or in non-aggressive gases. The sensors are not waterproof. The temperature sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers or 1-Wire hubs. It is also compatible with many other controllers. Application Contact sensor for heating systems, outdoor sensor Note: We recommend connecting a 0.1µF capacitor (ceramic) in parallel with the 1-Wire module, i.e. connecting +5V to GND. The capacitor should be placed as close as possible to increase the stability of the entire 1-Wire network.
Product number: 11137
Available, delivery time: 1-5 days, depending on the carrier
Accessories
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology with 6 outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.
Product number: 11142
Available, delivery time: 1-5 days, depending on the carrier
1-Wire distributor for cabling 1-Wire sensors in linear bus topology with 6 outputs on push-in terminals* plus one RJ45 modular socket Distribution module for simple cabling in linear bus topology of 1-Wire sensors and actuators. Area of application: Smart Home, Smart Building Intended for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This enables fast and cost-sensitive cabling. Thanks to the use of push-in clamps, you do not need a screwdriver for installation. The days of screws coming loose are also over. You can connect several 1-Wire distributors 4 to other 1-Wire distributors quickly and easily using a network patch cable. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections
Product number: 11162
Available, delivery time: 1-5 days, depending on the carrier
The 1-Wire distributor 6 Professional offers an efficient solution for the linear cabling of 1-Wire sensors in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributors 6 LIN linearly with each other via system cable. The distributor is compatible with the existing ESERA cabling systems
Product number: 11164
Available, delivery time: 1-5 days, depending on the carrier
The 1-Wire distributor 7 Professional offers an efficient solution for star-shaped cabling of 1-Wire sensors and actuators in industrial environments and in the IoT sector. With its 6 inputs/outputs on push-in plugs, supplemented by a functional earth, the distributor offers a flexible connection option for various components. Thanks to its compatibility with CAT5, CAT6 and other system cables with 5 cores plus shield, it enables simple integration into existing cabling systems and guarantees a reliable and stable connection. Installation is uncomplicated and time-saving as no screws are required. The push-in clamps enable tool-free installation and prevent unintentional loosening of connections. It is also possible to connect several 1-Wire distributor 7s together in a star configuration using system cables. The distributor is compatible with existing ESERA cabling systems.
Product number: 11166
Available, delivery time: 1-5 days, depending on the carrier
Lock: Ball-shaped closure Design: Stainless steel type 304, material thickness 0.3 mm Dimensions: 152 x 4,5 mm Temperature range: -80°C - +500°C Packaging quantity: 5 pieces
Product number: 42624
Available, delivery time: 1-5 days, depending on the carrier