Door opener / Access system via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway Features: Independent access system for electric doors / door opener via iButton and RFID key (RFID via RFID to 1-Wire reader, Art. No. 11614) the 1-Wire Controller / 1-Wire Gateway takes over the control of an electric door opener when an RFID or iButton key is contacted or brought into the area of the RFID reader. Additionally, an additional feedback output for an LED display can be controlled. Internal relays of the 1-Wire Controller 2 or any 1-Wire module in the 1-Wire network can be used as control output Door open time can be set in a wide range (1 - 65000 seconds) Additional display output for feedback via LED displays Electrical devices can also be activated for a time up to 65000 seconds incl. iButton / RFID Fast Mode function extension NO superordinate software / control system is required for the door opener function max. 30 keys can be used. If further 1-Wire devices are controlled, correspondingly fewer keys Application: With this function extension for 1-Wire controller / 1-Wire gateway, a door opener function or access system can be implemented via iButton Release of electrical devices for a certain time, e.g. for TV, beamer or game consoles (child safety lock)

iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway   Function: with this software function extension the 1-Wire Controller / 1-Wire Gateway queries connected / learned RFID key fobs / cards and/or iButtons extremely fast the status information of the RFID units or iButtons is then transferred to the higher-level control (software, such as IP-Symcon or FHEM) via the 1-Wire Controller / 1-Wire Gateway the "if-then" logic, e.g. when an RFID unit or iButton should trigger a function, is programmed in the software The 1-Wire controller / 1-Wire gateway does not perform any logic tasks in this function extension, i.e. no output for a door opener is triggered Applications: With this function extension you can implement a door opener function or time recording via RFID unit or iButton. You activate the function extension via the Config-Tool (configuration software of the 1-Wire controller / 1-Wire gateway). Instructions can be found in the Config-Tool in the help file  

introductory price!HSConnect 1WireKNX Gira home server software plug-in for 1-Wire Controller 1 or 1-Wire Controller 2 With this logic component for 1-Wire Controller / 1-Wire Gateway you can make all 1-Wire ESERA automation sensors available for KNX via Gira HomeServer. The Gira HomeServer is connected to the 1-Wire Controller via TCPIP.The free software module from Grot is provided for making the 1-Wire data available in the KNX network. HSConnect 1Wire is now available for download. For test operation, the software can be tested without a license after each restart of the HomeServer for 2 hours with an ESERA 1-Wire controller and four sensors. This license is required for permanent operation. Performance features: Support of ESERA automation 1-Wire Controller 1 and 2 Support of up to 30 1-Wire devices with up to 5 measured values ( = 150 measured values ) per device For each individual measured value, the output behaviour can be configured individually (number of decimal places, cyclic output every n seconds, output only when changing by the value x to the last output value) Control of the analog output (controller 2 only) incl. active feedback Control of the digital outputs (controller 2 only) incl. active feedback Heartbeat Test (active monitoring of the availability of the controller) Output of status, article and serial number of all connected 1-Wire devices Output of various controller information for diagnostic purposes (article number, serial number, hardware version, firmware version) Here you can find the download: https://www.grot-automation.de/produkte/hsconnect-1-wire/    

Introductory price!Function extension of the 1-Wire Controller 1 for WAGO / Codesys (1-Wire Controller 2 currently not supported) With this function extension, you can establish a direct connection between a 1-Wire Controller 1 Ethernet and, for example, a WAGO PLC controller. The data is supplied to the Codesys environment via our software module. You can download the software module free of charge from us. In the demo version only 3 blocks / modules are released. After activating the function extension, 30 sensors or actuators are available.To activate the function key of the 1-Wire Controller, connect the Config software to the Internet and the 1-Wire controller. After receipt of payment we will activate the function key for your 1-Wire Controller 1. The function key is permanently stored in the 1-Wire Controller 1.How is this function key activated?In the following the steps in telegram style:1. please download the software package for the 1-Wire Controller 1 and install the "1-Wire Config Tool 2" 2. register within the "1-Wire Config-Tool 2" 3. mark the function key 14. we activate the function on our server after receipt of payment. 5. synchronize all function extensions and transfer the new function key to the 1-Wire Controller 1 6. Now you can use all functions of the KNX-Grot software moduleImportant: The function key you purchased is only valid for the ordered 1-Wire Controller 1 and cannot be transferred to another 1-Wire Controller 1.