Quantity | Unit price |
---|---|
1 to 49 |
€25.90*
|
50 to 99 |
€24.61*
|
From 100 |
€23.31*
|
Overview
Description
RFID Reader according to 1-Wire Bus, RFID - iButton reader
iButton, security and authentication system on 1-Wire basis
Contactless reader unit for reading RFID* cards or keys via the 1-Wire bus.
RFID cards are read like normal iButton keys via 1-Wire bus. Each RFID card or key has a unique and uniquely assignable serial number. The only difference is that the RFID's are interrogated wirelessly.
The RFID reader is intended for permanent installation in machines, doors or devices. Ideally suited as an access system for front doors or secure areas in companies and public authorities.
The data transfer between RFID card or key and the 1-Wire bus is serial. Only three wires with a power supply, data and ground line are required.
Examples of use
- Security and authentication system
- Goods tracking within logistics
- Access rights for devices and machines
- Inventory
Type |
DG9092L2 |
RFID tags |
RFID UNIQUE 125kHz, 64 bit |
Reading distance |
2 - 10cm, depending on the quality of the cards or buttons to be read |
Power supply |
6.5 to 32VDC |
Power consumption |
approx. 12mA without LEDs |
Connection |
5 wires, approx. 40cm with open cable ends |
Cable Assignment |
Yellow: Power supply 6.5 - 32VDC |
Design |
Plastic housing, M12 thread |
LED indicator |
LED green and red (no series resistor necessary) |
LED Power consumption |
approx. 10mA per colour |
Bus interface |
iButton, 1-Wire bus with 5VDC voltage |
Software |
Like all 1-Wire and iButton components, each RFID tag has a unique and unambiguous serial number. The number of the RFID tags is transmitted as follows: |
Dimensions |
28 x 9 mm (DxT, visible range) 15mm installation depth, M12 plastic thread |
Assembly |
Fixing by M12 threaded screw connection |
Scope of delivery |
reading unit with approx. 20cm connection cable, tension spring for mechanical fixation |
Hint:
No series resistors are required for the LEDs. To switch on an LED, only the corresponding cable must be connected to GND.
*Reading of UNIQUE 125 kHz RFID tags (Manchester coding) via the 1-Wire protocol
Properties
Mounting: | Fixation with M12 screw connection |
---|---|
Pinout: |
|
Power consumption: | ~12mA |
RFID-Tags: | RFID UNIQUE 125kHz, 64 bit |
Reading distance: | 2 - 10cm, depending on the quality of the cards or buttons to be read |
Type: | DG9092L2 |
1-Wire Interface: | iButton, bus with 5VDC voltage |
Power supply, Supply Voltage: | 6,5 - 32VDC |
Connection type: | 5 wires, approx. 40cm with open cable ends |
Scope of delivery: | Reading unit with approx. 20cm connection cable, tension spring for mechanical fixation |
LED Display: | LED green and red (no series resistor required) |
LED power consumption: | ~10mA per colour |
Login
Device Documentation | Operating instructions, connection diagram, conformity, ... |
Info Material | Product catalogue, Brochures |
Technical Downloads | Software & co. |
Worth knowing | Wikis, entries, tutorials |