1-Wire Multisensor Air Quality Humidity and Temperature Sensor Pro II
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€149.90*
|
| 50 to 99 |
€142.41*
|
| From 100 |
€134.91*
|
Overview
Description
Elegant Multisensor for air quality, humidity and temperature Pro II for 1-Wire bus system without "Air quality traffic light", for professional applications, such as public institutions, authorities etc.
- High measuring accuracy for temperature, humidity (300 - 400% more accurate than standard 1-Wire sensors) and air quality
- low power consumption
- processing of the sensor values, therefore no complex formulas necessary -
- wall sensor (surface mounting)
With the multi-sensor for air quality (or called air quality), temperature and humidity, it is easy to monitor the indoor climate. It is one of the few sensors on the market that combines all three types of sensors in one attractive sensor housing. The air quality sensor used operates on the basis of a VOC mixed gas sensor.
With the help of the air quality sensor, a statement on the current air quality and advice on ventilation can be given. With the help of the humidity sensor, the humidity conditions in the room are monitored and a warning about possible mould growth could be issued via the evaluation software.
All sensors together make up an important sensor for heating and ventilation systems and are a main component of individual room control.
In combination with switch modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated.
|
1-Wire components |
DS2438 Multisensor for temperature, humidity and air quality |
|
Temperature |
Temperature sensor with very high accuracy |
|
Measuring range |
- 40°C to +60°C (limited by the housing, sensor itself - 40°C to +125°C) |
|
Accuracy |
+/- 0.3° in the range of -10°C - 85°C |
|
Resolution |
12 bit, 0.0625°C/bit |
|
Air humidity |
Sensor with high accuracy |
|
Air humidity sensor |
Capacitive sensor |
|
Measuring range air humidity |
0 -100% rel. air humidity |
|
Accuracy |
+/-3,5 % |
|
Repeatability |
0,5% |
|
Resolution |
12 bit, approx. 0.1% humidity |
|
Air quality |
VOC sensor with very high accuracy and low energy consumption |
|
Air Quality Sensor Type |
Mixed Gas Sensor (VCO Sensor) |
|
Measuring range air quality |
400 - 3500 ppm (CO2 equivalent) |
|
Accuracy |
+/- 5%, depending on the air composition |
|
1-Wire connection |
3 - wire connection (data, ground and 5V), parasitic operation not supported |
|
Operating voltage |
5 V= (+10%/-20%) |
|
Power consumption |
approx. 25mA |
|
Connection |
push-in terminal |
|
Dimensions (outside) |
80 x 80 x 32mm (LxWxH) |
Note: Unfortunately, the Loxone 1-Wire Extension does not support the functional range of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with the article number 11127, which we produce on request.
Properties
| Accuracy: |
|
|---|---|
| Measurement values: |
|
| Measuring range: |
|
| Mounting: |
|
| Operating voltage: | 5VDC (+10%/-20%) |
| Power consumption: | ~25mA |
| Resolution: | 9 - 12 bits, 0.5°C - 0.0625°C/bit depending on the selected resolution |
| Sensors: |
|
| Function: | Sensoric |
| 1 wire bus, zone, connection: | 3-wire connection (data, ground and 5V), parasitic operation not supported |
| Connection type: | Push In terminal block |
| Dimensions: | 80 x 80 x 32 (LxWxH) |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Accessories
Product number: 11151
Product number: 11150