Sensor cable in PUR version (polyurethane) for all sensors indoors and outdoors, e.g. for sensors in the area of sauna, fireplace, stoves or solar systems 3x0,5qmm rust redPicture: 5m cable length Polyurethane cables are used wherever the interaction of high temperature differences and high mechanical load capacity make or damage conventional PVC-insulated cables brittle or brittle. For example, as power cables or sensor cables in the garden, outdoors (e.g. roof), in ships and airplanes, in heating, cooling and air conditioning technology, in lighting fixtures, etc. Connection cable especially for all types of sensors in outdoor areas. The UV-, weather-, oil-resistant, abrasion- and cut-resistant polyurethane jacket allows the use especially in industrial environments and for outdoor use. Cable design: 4x0,5qmm, PUR-cable, fine wire Assembly: 3xnumber cable + 1 x green/yellow, fine wire Cable color: Orange Cable diameter: Outer - Ø 7,2 mm Manufacturer's designation: Polyurethane cable Temperature range: Installed on the move: -40 - +90°C, permanently installed: -50 - +90°C Cable lengths: 5m, 10m, 25m and on request

Silicone cable Temperature resistant for all sensors indoors and outdoors, e.g. for sensors in saunas, fireplaces, ovens or solar systems 3x0,5qmm rust red Picture: 5m cable length Silicone-insulated cables are used wherever the interaction of high temperature differences or heat makes conventional PVC-insulated cables brittle or fragile. For example as power cable or sensor cable in sauna construction, in ships and airplanes, in heating, cooling and air conditioning technology, in lighting fixtures etc. The silicone cable is halogen-free and resistant to vegetable and animal fats, many oils and diluted acids as well as decomposition by alcohols, plasticizers, alkalis, salt solutions, etc. Cable outlet: 3x0,75qmm, silicone cable, fine wire Assembly: 2xcoloured (blue, brown) + 1 x green/yellow, fine wire Cable color: Rust red Cable diameter: Outer-Ø 6,0 mm Manufacturer's designation: Silicone cable SIHF-J Temperature range: Installed on the move: -40 - +120°C, permanently installed: -60 - +180°C       Cable lengths: 5m, 10m, 25m and on request

Holder for wind sensor Pro 200With this holder you can mount the wind sensor Pro 200 on walls or on a mast. The holder is delivered with a mounting clamp for a 50mm mast (antenna mast).The holder is made of aluminium and is supplied with a stainless steel mast clamp and is therefore suitable for professional use in weather stations. The wind sensor Pro 200 is mounted with a M6 screw with the holder. Application Stable mounting of the wind sensor Pro 200 on building walls or on masts Assembly On buildings with dowels and screws Mast mounting by ring - Mounting clamp Dimensions approx. 150 x 80mm (length x width) Accessories Wind sensor Pro 200 Scope of delivery Holder with mast clamp without wind sensor Pro 200

Mounting bracket for wind sensor Article No. 20008 Scope of delivery: Mounting bracket Mounting accessories for wind turbine Art.No. 20008  

The reed contact / magnetic contact is used as opening detector for monitoring doors, housings, windows and for smart home systems. The housing variants of the magnetic switch incl. the magnet as built-in and surface-mounted version allow an optimal adaptation to the object to be protected. It is suitable for both recessed and surface mounting. As protection against sabotage (bridging protection) a connection cable with four wires of the same colour is used. The surface-mounted housings are designed so that the contact can be installed in both directions. To ensure magnetic decoupling in the case of ferromagnetic objects, or to compensate for any height compensation, spacer blocks are supplied with the surface-mounted version. It can be mounted on a door frame, a window block or on the standing surface of an object to be monitored in such a way that an alarm is triggered if it is opened or lifted by more than 2 cm. VdS:     VdSClass B                       according to VdS GmbH (Damage prevention GmbH) Material:                      PA Magnet:                       Diameter 6 mm x 19 mm Neodymium, axially polarized Protection class:          IP 67 Connection cable:       4-core Cable length:               5 m LIYY ZGL 4 x 0.14 mm² Cu tin-plated LSA insulation,displacement technology suitable. Dimensions (WxHxD): 35 x 10 x 10 mm Color:                           white Contact type:               1 - pole NO contact Contact dimensions:    6 x 19mm Mounting flange:          6x6 / 10 mm for magnet and contact; for wood,  plastic, aluminium and non-magnetic metals  

Sensor bracket for wall mounting Mounting set for rain detector or 1-Wire solar brightness and temperature sensor Optimum drip angle Corrosion resistant aluminium Simple and stable construction Application pole mounting for - rain sensor or - 1-Wire solar, brightness and temperature sensor Material Aluminium, 2 mm Drainage angle 45 ° Scope of delivery Without accessories Without sensors

Sensor holder for mast mounting with clamp Mounting set for rain detector or 1-Wire solar brightness and temperature sensor Mast mounting (1/2' tube) Optimum drip angle Corrosion resistant aluminium Simple and stable construction Application pole mounting for - rain sensor or - 1-Wire solar, brightness and temperature sensor Material Aluminium, 2 mm Drainage angle 45 ° Scope of delivery Mast clamps, screws and dowels Without sensors

Lock: Ball-shaped closure Design: Stainless steel type 304, material thickness 0.3 mm Dimensions: 152 x 4,5 mm Temperature range: -80°C - +500°C Packaging quantity: 5 pieces

Wall bracket for wind sensor Pro 100With this holder you can fix the wind sensor Pro 100 to walls or even to a mast in a stable way. All screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations. The holder is made of aluminium and is supplied with a stainless steel mast clamp and is therefore suitable for professional use in weather stations.   Application Wall bracket for wind sensor Pro 100 Assembly Mounting via 6M screw connection Wall or pole mount bracket Dimensions approx. 210 mm x 80mm (length x width) Accessories Pole mount, wall bracket Scope of delivery Wind sensor without mounting bracket