The EC 1 Smart Home central unit/gateway is designed for autonomous management of a 1-Wire network. The user doesn't need to worry about any 1-Wire commands or formulas for evaluating sensor data. The EC1 gateway autonomously scans the 1-Wire network for components (sensors, actuators, keys). The central unit internally evaluates sensor and actuator data and cyclically outputs it in plain text, already converted (e.g., for temperature sensors in Celsius). Additionally, the article number for ESERA modules can be entered, and the calculation and output are adjusted to the module's function. A wide range of sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC, or particulate matter), digital alarm contacts, glass break, and smoke detectors. The 1-Wire interface of the sensor gateway of the EC 1 central unit is designed to securely handle both small and large 1-Wire networks with long cable runs. The 1-Wire sensors can be operated simultaneously in parasitic* or normal mode. The currently most powerful 1-Wire interface has been installed for maximum data security, even for complex network structures. For power supply, the EC 1 Smart Home Sensor Gateway has a wide input range of 9 - 30VDC, making it equally suitable for 12VDC and the typical 24VDC industrial supply voltages. Accessories such as DIN rails and plug-in power supplies: see homepage. HIGHLIGHTS Discover our cost-effective entry-level module with most functionalities of the professional central units ECO-Gateways Ethernet data interface provides support for ASCII text protocol LAN interface for data, configuration, debugging, and firmware updates With our patented Auto-E-Connect plug-and-play system from ESERA, manufacturer-independent 1-Wire devices can be quickly and fully automatically read Equipment Options Ultrafast iButton or RFID Read function for access or security authentication Custom adaptations and branding possible Note: The article is not delivered to Great Britain !

The EC 2 central processing unit is designed for demanding applications for autonomous management of a 1-Wire network. You no longer need to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators). The EC 2 Sensor Gateway outputs the sensor and actuator data ready prepared cyclically, e.g. for temperature sensors in C°. For scaling, it is only necessary to divide by 100. The article number for ESERA modules can also be entered; the calculation and output are adapted to the function of the module The 1-Wire interface of the EC 2 Sensor Gateway is specially designed to safely operate even large 1-Wire networks with long cable runs. Mixed 1-Wire sensors can be operated simultaneously in parasitic or normal mode. The most powerful 1-Wire interface currently available has been installed for maximum data security, even for complex network structures. DATA LOGGER (OPTIONAL): If the data connection to the host system is interrupted, no measured values are lost. The EC2 central unit contains a data logger for storing the sensor data. The current time is also saved to ensure that the data is saved at the correct time The EC 2 central unit has a wide-range input of 15 - 30VDC for the power supply and is equally suitable for smart home and typical industrial 24VDC supplies. You can find suitable DIN rail power supplies in our webshop HIGHLIGTHS Intelligent interface to many smart home devices and software solutions; expandable via ESERA 1-wire-hub, therefore also suitable for large networks Optional: data logging in case of communication interruption to the host systemData interface for Modbus/TCP, MQTT and ASCIILAN interface for data, configuration, debug and firmware updates Digital inputs/outputs with additional push-button interface, analog output ESERA-patented Auo-e-connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming. Customizations and branding possible Note: The article is not delivered to Great Britain !

The ECO 502 central processing unit is a powerful industrial 1-Wire sensor gateway of the latest generation for plant and system system monitoring. The gateway is equipped with an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically to the 1-Wire bus via the Auto-E-Connect plug-and-play system. A wide range of measurement sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), additionally for glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device, without Linux and with its own native programming. was implemented. No unknown libraries are used, which ensures the stability stability and reliability of the system. The WLAN and LAN interface can be used for communication with up to 3 data connections via Modbus/TCP, MQTT, ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -5°C to 50°C Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible Note: The article is not delivered to Great Britain !

The ECO 503 Pro central unit, Industrial Ethernet/LAN switching actuator can be used as an IT switching actuator, IoT cloud switching module and industrial LAN relay module. The switching actuator offers a high switching capacity of 8x16A* and can therefore control complete luminous flux circuits, larger machine or luminaire groups (without dimmers). The integrated high-performance relays can be controlled either by software commands or by 8 digital inputs. The digital inputs are designed for operation with a low voltage of 10-30 VDC and are optimized for push-button operation. The ECO503 central unit supports 4 data protocols: Modbus/TCP, ASCII text, MQTT (with optional SSL encryption). These protocols can communicate in parallel on up to 4 data channels. The device has a web server for switching, configuration and firmware updates. The web server can be accessed via LAN or the access point (activated at the touch of a button). The ECO 503 switching actuator was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which ensures the stability and reliability of the system. Extensive free software support is available. The ECO 503 Pro central processing unit offers a wide range of possible uses and can be seamlessly integrated into various control and automation technology applications. *Note: The specification "8x16A" means that the switching actuator has a total of 8 outputs, each of which can switch a maximum current of 16 amps. HIGHLIGHTS 8 High-performance switching channels (up to 10/16A* switching current), 8 digital inputs for direct control of the switching channels Web server and LAN interface/access point for data, configuration, debug and firmware updates Multi-protocol capable: HTML, Modbus/TCP, MQTT and ASCII Robust and low-maintenance industrial design, can be used for the extended temperature range from -5°C to 50°C regardless of manufacturer Native programming: without Linux and without unknown libraries Cost savings thanks to simple installation and fast commissioning Applications Industrial plant and machinery Smart Building IoT and M2M applications Energy optimization for all consumers, rooms and buildings through central control Switching/control of loads up to 16Amp switching current (switching channels are separately fused) Optional equipment Personalization and branding possible Basis for extensions, e.g. more channels, analog in/out, energy detection, etc. Note: The article is not delivered to Great Britain !

The ECO 531 central device/gateway is a modern system bus interface for the comprehensive monitoring and control of systems. It integrates up to 30 sensors and actuators via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. The ECO central units are low-maintenance industrial devices that have been the standard for 1-Wire bus systems for over 10 years, offer stability and meet a high "security by design" standard. The gateway can be controlled in parallel by PLC controllers, cloud applications and text protocols through BMS and media control systems. The simple installation of complex networks is facilitated by the integrated 1-Wire Zone feature. ESERA offers a wide range of sensors and actuators for the gateway. User-friendliness is reflected in the intuitive and simple configuration, software updates and provision of data via the web server, accessible via LAN or the access point that can be activated at the touch of a button. HIGHLIGHTS Three 1-wire bus zones, fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -20°C to 50°C Applications Suitable for complex 1-wire networks: Industrial plants Mechanical engineering Building management, IoT and M2M, silo monitoring Energy optimization in many application areas, can be used regardless of manufacturer Optional equipment Ultrafast iButton or RFID Read function for access or security authentication TPM (Trusted Platform Module) hardware for secure boot and SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible Note: The article is not delivered to Great Britain !