1-Wire Dual Reed contact, circuit board

The reed contact / magnetic contact is used as opening detector for monitoring doors, housings, windows and for smart home systems. The housing variants of the magnetic switch incl. the magnet as built-in and surface-mounted version allow an optimal adaptation to the object to be protected. It is suitable for both recessed and surface mounting. As protection against sabotage (bridging protection) a connection cable with four wires of the same colour is used. The surface-mounted housings are designed so that the contact can be installed in both directions. To ensure magnetic decoupling in the case of ferromagnetic objects, or to compensate for any height compensation, spacer blocks are supplied with the surface-mounted version. It can be mounted on a door frame, a window block or on the standing surface of an object to be monitored in such a way that an alarm is triggered if it is opened or lifted by more than 2 cm. VdS:     VdSClass B                       according to VdS GmbH (Damage prevention GmbH) Material:                      PA Magnet:                       Diameter 6 mm x 19 mm Neodymium, axially polarized Protection class:          IP 67 Connection cable:       4-core Cable length:               5 m LIYY ZGL 4 x 0.14 mm² Cu tin-plated LSA insulation,displacement technology suitable. Dimensions (WxHxD): 35 x 10 x 10 mm Color:                           white Contact type:               1 - pole NO contact Contact dimensions:    6 x 19mm Mounting flange:          6x6 / 10 mm for magnet and contact; for wood,  plastic, aluminium and non-magnetic metals  

1-Wire Dual Digital I/O Chip Actuator for 2 channel digital input or output Temperature range: -55 to +85°C- Supply voltage: 2.8V - 5.25VHousing: TOSC 8 Type :DS2413P+PIO Pins Support 20mA max Continuous Current Sink - Supports 28V (max) PIO Pin Operating Voltage - On-Resistance of PIO Pulldown Transistor 20mA, max; OFF Resistance 1MOhm - Parasitic Power Supply Through 1-Wire  

AKZ terminals 250V 2/3 pole green Manufacturer designation: AKZ 700Board clamp for all top-hat rail modules, including- 1-Wire 8-fold switch module 230V 5A (11206)- 1-Wire shutter control (11209)- 1-Wire dual switch module 230V 5A (11204-R) Nominal voltage (EN 60998): 250V AC rated current (T60): 24A Test voltage: 2kV Nominal cross section solid: 4.0mm2 Nominal cross section finely stranded: 2.5mm2 Stripping length: 8,0mm Insulating body: PA Temperature range: -30...+105°C Burning behaviour: UL94V-0 Color: green Dimensions: 2-pole 3-pole 10.16x19x10.5 (LxHxD) 15.24x19x10.5 (LxHxD) Grid dimension 5,08mm   Quantity discount: as of 10 pieces 5%. Figure is similar. Decisive are the product specifications of the respective manufacturer (e.g. data sheet). errors & changes of the product description are reserved at any time.