DG9092 ES iButton reader stainless steel
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€10.90
|
| 50 to 99 |
€10.36
|
| From 100 |
€9.81
|
Product information "DG9092 ES iButton reader stainless steel"
Overview
Description
iButton, security and authentication system on 1-Wire basis
iButton contact surface stainless steel. Designed for permanent installation in devices, machines or doors (front doors or bell systems).
The data transfer between iButton key and 1-Wire bus is serial. Only one data line and ground is required.
The combination of iButton Key and 1-Wire Controller 1 forms an optimally coordinated security or access system.
iButton components fit, among others, for the Loxone controller and the E-Service 1-Wire Controller 1 and 1-Wire Controller 2
Design
- Contact surface stainless steel
- Plastic housing for insulated installation
- approx. 20 cm connection cable (without plug)
- For outdoor and indoor use
Examples of use
- Security and authentication system
- Goods tracking within logistics
- Access rights for devices and machines
- Inventory
|
Type |
DG9092L0-M0-ST |
|
Connections |
2 wires |
|
Design |
Housing plastic, contact surface stainless steel |
|
Bus interface |
iButton (1-Wire bus with 5VDC, parasitic operation) |
|
Dimensions |
22.9 x 9.7 mm (DxH) without cable |
|
Assembly |
Fixing by tension spring ring |
|
Scope of delivery |
reading unit with approx. 20cm connection cable, tension spring for mechanical fixation |
Pin assignment:
Data: white
GND: brown
Properties
| Mounting: | Fixation by spring washer |
|---|---|
| Type: | DG9092L0 |
| 1-Wire Interface: | iButton, bus with 5VDC voltage |
| Connection type: | 2 wires |
| Scope of delivery: | Reading unit with approx. 20cm connection cable, tension spring for mechanical fixation |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Accessories
Door opener / Access system via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway Features: Independent access system for electric doors / door opener via iButton and RFID key (RFID via RFID to 1-Wire reader, Art. No. 11614) the 1-Wire Controller / 1-Wire Gateway takes over the control of an electric door opener when an RFID or iButton key is contacted or brought into the area of the RFID reader. Additionally, an additional feedback output for an LED display can be controlled. Internal relays of the 1-Wire Controller 2 or any 1-Wire module in the 1-Wire network can be used as control output Door open time can be set in a wide range (1 - 65000 seconds) Additional display output for feedback via LED displays Electrical devices can also be activated for a time up to 65000 seconds incl. iButton / RFID Fast Mode function extension NO superordinate software / control system is required for the door opener function max. 30 keys can be used. If further 1-Wire devices are controlled, correspondingly fewer keys Application: With this function extension for 1-Wire controller / 1-Wire gateway, a door opener function or access system can be implemented via iButton Release of electrical devices for a certain time, e.g. for TV, beamer or game consoles (child safety lock)
Product number: 40203
iButton, security and authentication system on 1-Wire basis iButton key fob with DS1990A F5 module is fully assembled. Access key for mounting on key ring. Available in different colours.
Product number: 11621.2M