The EC 2 central processing unit is designed for demanding applications for autonomous management of a 1-Wire network. You no longer need to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators). The EC 2 Sensor Gateway outputs the sensor and actuator data ready prepared cyclically, e.g. for temperature sensors in C°. For scaling, it is only necessary to divide by 100. The article number for ESERA modules can also be entered; the calculation and output are adapted to the function of the module The 1-Wire interface of the EC 2 Sensor Gateway is specially designed to safely operate even large 1-Wire networks with long cable runs. Mixed 1-Wire sensors can be operated simultaneously in parasitic or normal mode. The most powerful 1-Wire interface currently available has been installed for maximum data security, even for complex network structures. DATA LOGGER (OPTIONAL): If the data connection to the host system is interrupted, no measured values are lost. The EC2 central unit contains a data logger for storing the sensor data. The current time is also saved to ensure that the data is saved at the correct time The EC 2 central unit has a wide-range input of 15 - 30VDC for the power supply and is equally suitable for smart home and typical industrial 24VDC supplies. You can find suitable DIN rail power supplies in our webshop HIGHLIGTHS Intelligent interface to many smart home devices and software solutions; expandable via ESERA 1-wire-hub, therefore also suitable for large networks Optional: data logging in case of communication interruption to the host systemData interface for Modbus/TCP, MQTT and ASCIILAN interface for data, configuration, debug and firmware updates Digital inputs/outputs with additional push-button interface, analog output ESERA-patented Auo-e-connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming. Customizations and branding possible Note: The article is not delivered to Great Britain !

introductory price!HSConnect 1WireKNX Gira home server software plug-in for 1-Wire Controller 1 or 1-Wire Controller 2 With this logic component for 1-Wire Controller / 1-Wire Gateway you can make all 1-Wire ESERA automation sensors available for KNX via Gira HomeServer. The Gira HomeServer is connected to the 1-Wire Controller via TCPIP.The free software module from Grot is provided for making the 1-Wire data available in the KNX network. HSConnect 1Wire is now available for download. For test operation, the software can be tested without a license after each restart of the HomeServer for 2 hours with an ESERA 1-Wire controller and four sensors. This license is required for permanent operation. Performance features: Support of ESERA automation 1-Wire Controller 1 and 2 Support of up to 30 1-Wire devices with up to 5 measured values ( = 150 measured values ) per device For each individual measured value, the output behaviour can be configured individually (number of decimal places, cyclic output every n seconds, output only when changing by the value x to the last output value) Control of the analog output (controller 2 only) incl. active feedback Control of the digital outputs (controller 2 only) incl. active feedback Heartbeat Test (active monitoring of the availability of the controller) Output of status, article and serial number of all connected 1-Wire devices Output of various controller information for diagnostic purposes (article number, serial number, hardware version, firmware version) Here you can find the download: https://www.grot-automation.de/produkte/hsconnect-1-wire/    

The EC 1 Smart Home central unit/gateway is designed for autonomous management of a 1-Wire network. The user doesn't need to worry about any 1-Wire commands or formulas for evaluating sensor data. The EC1 gateway autonomously scans the 1-Wire network for components (sensors, actuators, keys). The central unit internally evaluates sensor and actuator data and cyclically outputs it in plain text, already converted (e.g., for temperature sensors in Celsius). Additionally, the article number for ESERA modules can be entered, and the calculation and output are adjusted to the module's function. A wide range of sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC, or particulate matter), digital alarm contacts, glass break, and smoke detectors. The 1-Wire interface of the sensor gateway of the EC 1 central unit is designed to securely handle both small and large 1-Wire networks with long cable runs. The 1-Wire sensors can be operated simultaneously in parasitic* or normal mode. The currently most powerful 1-Wire interface has been installed for maximum data security, even for complex network structures. For power supply, the EC 1 Smart Home Sensor Gateway has a wide input range of 9 - 30VDC, making it equally suitable for 12VDC and the typical 24VDC industrial supply voltages. Accessories such as DIN rails and plug-in power supplies: see homepage. HIGHLIGHTS Discover our cost-effective entry-level module with most functionalities of the professional central units ECO-Gateways Ethernet data interface provides support for ASCII text protocol LAN interface for data, configuration, debugging, and firmware updates With our patented Auto-E-Connect plug-and-play system from ESERA, manufacturer-independent 1-Wire devices can be quickly and fully automatically read Equipment Options Ultrafast iButton or RFID Read function for access or security authentication Custom adaptations and branding possible Note: The article is not delivered to Great Britain !

Introductory price!Function extension of the 1-Wire Controller 1 for WAGO / Codesys (1-Wire Controller 2 currently not supported) With this function extension, you can establish a direct connection between a 1-Wire Controller 1 Ethernet and, for example, a WAGO PLC controller. The data is supplied to the Codesys environment via our software module. You can download the software module free of charge from us. In the demo version only 3 blocks / modules are released. After activating the function extension, 30 sensors or actuators are available.To activate the function key of the 1-Wire Controller, connect the Config software to the Internet and the 1-Wire controller. After receipt of payment we will activate the function key for your 1-Wire Controller 1. The function key is permanently stored in the 1-Wire Controller 1.How is this function key activated?In the following the steps in telegram style:1. please download the software package for the 1-Wire Controller 1 and install the "1-Wire Config Tool 2" 2. register within the "1-Wire Config-Tool 2" 3. mark the function key 14. we activate the function on our server after receipt of payment. 5. synchronize all function extensions and transfer the new function key to the 1-Wire Controller 1 6. Now you can use all functions of the KNX-Grot software moduleImportant: The function key you purchased is only valid for the ordered 1-Wire Controller 1 and cannot be transferred to another 1-Wire Controller 1.