Backup capacitor 100nF
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€1.49*
|
| 50 to 99 |
€1.42*
|
| From 100 |
€1.34*
|
Instantly available
Shipping until , if you place your order within the next .
Product number:
42603
EAN:
0782321213498
Manufacturer product ID:
42603
Product information "Backup capacitor 100nF"
Overview
Ceramic capacitor, block capacitor for 1-Wire devices and sensors, 100nF, 0.1µF
Description
Backup capacitor, blocking capacitor for 1-Wire devices, e.g. DS18B20
Design: multilayer ceramic capacitor
Value: 100nF
Dimensions/pitch: 5,08mm
Dielectric strength: 50V
Packaging unit: 10 pieces
Design: multilayer ceramic capacitor
Value: 100nF
Dimensions/pitch: 5,08mm
Dielectric strength: 50V
Packaging unit: 10 pieces
Properties
| Connection type: | Open cable ends |
|---|---|
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Accessory Items
Shipping until
Temperature sensor cable LC 1-Wire 1,8m
Low-cost 1-wire temperature sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends.
The sensors are suitable for measuring outdoors, on surfaces or in non-aggressive gases. The sensors are not waterproof. The temperature sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers or 1-Wire hubs. It is also compatible with many other controllers.
Application
Contact sensor for heating systems, outdoor sensor
Note:
We recommend connecting a 0.1µF capacitor (ceramic) in parallel with the 1-Wire module, i.e. connecting +5V to GND. The capacitor should be placed as close as possible to increase the stability of the entire 1-Wire network.
Product number: 11139
Instantly available
Shipping until , if you place your order within the next .
Shipping until
Temperature sensor cable LC 1-Wire 1m
Low-cost 1-wire temperature sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends.
The sensors are suitable for measuring outdoors, on surfaces or in non-aggressive gases. The sensors are not waterproof. The temperature sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers or 1-Wire hubs. It is also compatible with many other controllers.
Application
Contact sensor for heating systems, outdoor sensor
Note:
We recommend connecting a 0.1µF capacitor (ceramic) in parallel with the 1-Wire module, i.e. connecting +5V to GND. The capacitor should be placed as close as possible to increase the stability of the entire 1-Wire network.
Product number: 11137
Instantly available
Shipping until , if you place your order within the next .