Sensors for rain, wind, solar radiation, brightness and temperature
In winter the birds sing and in spring there is frost? Outside the weather is going crazy?
Thanks to our environmental sensors and weather station, your house will automatically react correctly to all weather conditions. Instead of being annoyed by the weather, you can relax and talk about it.
Holder for wind sensor Pro 200With this holder you can mount the wind sensor Pro 200 on walls or on a mast.
The holder is delivered with a mounting clamp for a 50mm mast (antenna mast).The holder is made of aluminium and is supplied with a stainless steel mast clamp and is therefore suitable for professional use in weather stations. The wind sensor Pro 200 is mounted with a M6 screw with the holder.
Application
Stable mounting of the wind sensor Pro 200 on building walls or on masts
Assembly
On buildings with dowels and screws
Mast mounting by ring - Mounting clamp
Dimensions
approx. 150 x 80mm (length x width)
Accessories
Wind sensor Pro 200
Scope of delivery
Holder with mast clamp without wind sensor Pro 200
From
€19.71*
Product number: 20021
Instantly available
Shipping until , if you place your order within the next .
Multisensor Pro 100 for ESERA Data Center environmental measuring system, door sensorHumidity and temperature for mounting on control cabinet doors, black version.
Highlights:
Horizontal ventilation
High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors)
Low power consumption
Processing of sensor values, therefore no complex formulas necessary
Elegant door / wall housing black
Function:
With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in data centers.
The Multisensor Pro 100 has an attractive white sensor housing for mounting on control cabinet doors.
From
€161.91*
Product number: 11167-SW
Instantly available
Shipping until , if you place your order within the next .
MSP 200, System monitoring per Environment - MultisensorMultisensor Pro 200 for ESERA Data Center environmental measuring system, humidity and temperatureDescription
The MSP 200 is an industrial environmental multisensor of the latest generation for building, system and infrastructure monitoring.
The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges.
The MSP 200 has power and status LED indicators.The sensor finder LED function allows the sensor to be found quickly in large networks.The ESERA Plug and Play system, called Auto-E-Connect, installs the MSP 200 fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered as a German and European patent by ESERA GmbH.The installation is done in a few minutes by the dual push in connector system.Due to a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.The housing is protected against vandalism and insects.Processing of the sensor values, thus no complex formulas necessaryThe Multisensor Pro 200 for temperature and humidity makes it easy to monitor the indoor climate in data centers.The Multisensor Pro 200 has an attractive white sensor housing for mounting on control cabinet doors or walls.
From
€97.11*
Product number: 11168
Instantly available
Shipping until , if you place your order within the next .
MSP203 Multisensor Pro Smoke, Humidity and Temperature
Highlights:
Wall mounting, e.g. in a control cabinet
High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors)
Low power consumption
Processing of the sensor values, therefore no complex formulas necessary
Function:With the MSP203 Smoke Sensor you can implement an early warning system for developing fires.The MSP 203 Environment - Multisensor quickly detects smoke / fume
and measures temperature, relative humidity and dew point with high accuracy.
dew point.The sensor MSP 203 is an industrial environmental multisensor of the newest
generation and is designed for control cabinet, system and infrastructure monitoring.
monitoring.The sensor has LED indicators for power, status and
sensor function.The Sensor Finder LED function allows the sensor to be found quickly in large networks.
large networks.
Per ESERA Plug and Play System, called Auto-E-Connect, the
the MSP 203 is installed fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the
1-Wire Bus standard, has been registered by ESERA GmbH as German
and European patent pending.The installation is done in a few minutes by the
dual RJ45 connector system for patch cables.
Due to a sophisticated EMC and grounding concept the
environmental multisensor for industrial environments is well prepared for a reliable
reliable operation.
Horizontal air flow measurement direction, detection of air flow into
or out of the control cabinet
Intended for mounting on surfaces, e.g. in the control cabinet
From
€188.91*
Product number: 11171
Instantly available
Shipping until , if you place your order within the next .
The UMS2205 system is a high-performance environmental measurement system of the latest generation for long-term use.
A wide range of sensors is available, enabling almost seamless environmental monitoring:
A certified fine dust sensor that accurately detects particles in the sizes 1µm, 2.5µm, 4µm and 10µm.
Sensors for nitrogen oxides, ozone, air quality, carbon dioxide (CO2) and relative humidity to record comprehensive environmental data.
Additional measurement options such as the dew point and temperature provide further insights into the ambient conditions.
Expansion options for ground temperature, frost detection, solar radiation, brightness (day/night detection), rain, wind direction and speed offer flexible adaptation to different environmental conditions
Up to 15 sensors can be installed in the UMS2205 on 5 sensor measuring stations as required.
The sensor values are transmitted via two long-range wireless data systems, LoRaWAN and NB-IoT.
Live data can be read out via the WLAN interface and configured and updates imported via the web server.
The UMS2205 can be expanded fully automatically by up to 30 additional external sensors via Industrial 1-Wire Bus and Auto-E-Connect Plug and Play system. The ESERA Auto-E-Connect system is an extension of the 1-Wire bus standard and has been registered as a German and European patent by ESERA GmbH.
Each of the maximum 30 additional sensors can supply up to 5 data values. This means that the UMS2205 can supply up to 200 sensor data to your control system.
HIGHLIGHTS
WLAN, web server and access point for configuration, debugging, maintenance and firmware updates
LoRaWAN, NB-IoT (LTE) long-range data interfaces
Connection option for 5 measuring modules with up to 15 sensors, expandable via the plug-and-play interface for up to 30 additional sensors
Robust, energy-saving industrial design in a compact and elegant housing (insect-proof, "ball-proof", integrated vandalism sensor)
Optional equipment
UPS function via battery for at least 10 minutes of operation. Power failures are detected and reported and the sensor data can still be sent to the higher-level control system.
Long-term data logger function can be integrated for measured value recording or logging
Vandalism protection for the detection of housing openings
External antenna for the radio data and WLAN interfaces possible
From
€2,646.81*
Product number: 11611-230
Currently not available, please sign up to get notified
Rain sensor with heater and professional, functionally reliable measuring principle (12V)The large sensor surface reacts to rain or snow. The switching polarity and sensitivity are adjustable. The switchable heating prevents icing or condensation and accelerates drying. In the most sensitive setting, the device is also suitable for detecting fog.
The mast or wall mounting bracket, available as an accessory, enables easy installation. Typical areas of application are in garden centres, in agriculture, in building control systems, but also in the home and garden.
The rain sensor works on the basis of an alternating current measuring system (electrolytic measuring principle). The advantage is that no sensor electrode can degrade and therefore has a significantly higher life expectancy compared to other sensors with direct current measuring principle (as almost 80% of all devices on the market).
The potential-free relay contact closes when rain starts. The relay contact can transmit any voltage, e.g. 12V or 24V, to the evaluation electronics, e.g. an ESERA 1-Wire Digital Input or 1-Wire Switch Input Module.
Measurement procedure:
Electrolytic AC voltage measurement
Evaluation:
- Potential-free changeover relay contact- Active in rain or dew- Contacts are isolated from the rest of the electronics.
Power supply:
12V or 24V AC or DC (+/-10%), depending on version
Power consumption:
approx. 60mA (with heating 80 - 300mA)
Relay contact:
max. 30V / 4A
Dimensions:
80 x 82 x 58mm
Scope of delivery:
Device with instructions, without evaluation electronics, without mounting bracket
From
€69.21*
Product number: 20002
Currently not available, please sign up to get notified
Sensor bracket for wall mounting
Mounting set for rain detector or 1-Wire solar brightness and temperature sensor
Optimum drip angle
Corrosion resistant aluminium
Simple and stable construction
Application
pole mounting for - rain sensor or - 1-Wire solar, brightness and temperature sensor
Material
Aluminium, 2 mm
Drainage angle
45 °
Scope of delivery
Without accessories Without sensors
From
€14.31*
Product number: 20031
Instantly available
Shipping until , if you place your order within the next .
Sensor holder for mast mounting with clamp
Mounting set for rain detector or 1-Wire solar brightness and temperature sensor
Mast mounting (1/2' tube)
Optimum drip angle
Corrosion resistant aluminium
Simple and stable construction
Application
pole mounting for - rain sensor or - 1-Wire solar, brightness and temperature sensor
Material
Aluminium, 2 mm
Drainage angle
45 °
Scope of delivery
Mast clamps, screws and dowels Without sensors
From
€16.11*
Product number: 20030
Instantly available
Shipping until , if you place your order within the next .
The 1-Wire Solar Multisensor is a combination sensor for the detection of irradiation, brightness and perceived temperature to control shading and roller shutters in buildings.
The solar sensor is for recording the solar irradiation energy over the entire day. The sensor is ideal for controlling shading systems or roller shutters. The detection range for brightness and solar sensor covers a range up to 75000 Lux (divided between a brightness and solar sensor). The sensor is also ideally suited for comparative measurements with existing PV systems. This allows early detection of failures of PV cells, strings or inverters through comparative measurements. A monocrystalline solar cell is used for the solar measurement.
The brightness sensor detects the brightness value of the environment in a range of 10 - 7000 Lux, the temperature sensor detects a temperature range of -40 to +85°C. Mounting brackets available as accessories. Note for OWFS: The solar value (xsens) can be read for the DS2438 in the OWFS directory tree in the variable "vis".
From
€93.51*
Product number: 11112
Currently not available, please sign up to get notified
Wall bracket for wind sensor Pro 100With this holder you can fix the wind sensor Pro 100 to walls or even to a mast in a stable way. All screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations.
The holder is made of aluminium and is supplied with a stainless steel mast clamp and is therefore suitable for professional use in weather stations.
Application
Wall bracket for wind sensor Pro 100
Assembly
Mounting via 6M screw connection
Wall or pole mount bracket
Dimensions
approx. 210 mm x 80mm (length x width)
Accessories
Pole mount, wall bracket
Scope of delivery
Wind sensor without mounting bracket
From
€17.01*
Product number: 20011
Currently not available, please sign up to get notified
Wind sensor Pro 200 with heating
With the compact and professional wind sensor Pro 200, the current wind speed can be recorded and, e.g. in the event of gusts of wind, it can provide information via the system control for retracting an awning or raising roller shutters or slats. The wind sensor Pro 200 is an optimal environmental sensor for recording wind speed for weather recording. For operation in winter the wind sensor Pro 200 is equipped with a heater. This prevents icing and thus a failure of the wind sensor. All bearings and screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations. Via the S0 interface (pulse output) pulses are output depending on the wind speed. 4 pulses are emitted per revolution. The wind sensor Pro 200 has a pulse output and is designed for connection to the 1-Wire Dual S0 counter module (Art. No. 11211). It is weatherproof and has an approx. 3 meter long connection cable. A mast holder, wall bracket and mounting masts are available as accessories.
Application
Protection of awnings, roller shutters and blinds / slats by gusts of wind
Recording of the wind speed for weather data acquisition
Assembly
Mounting on 50mm mast (antenna mast)
Wall or roof bracket
Flat roof mast
Cable length max. 10m to S0 counter
Measuring range
0 - 50m/s (0 - 180 Km/s)
Output signal sensor
4 pulses per m/s
Electrical values
Heating: 24 V AC or DC approx. 0.15W
S0 interface (reed contact, normally open contact)
4 pulses per revolution
1 pulse corresponds to 0.25m/s
Connection
approx. 3m cable, 4-wire
Evaluation
Pulse output e.g. for 1-Wire S0 counter 11211 See connection example (Download)
Dimensions
approx. 210 mm x 80mm (height x width) Wind turbine Ø 160 mm
Accessories
Pole mount, wall bracket, pole for flat roof
Scope of delivery
Wind sensor without mounting bracket
From
€147.51*
Product number: 20020
Instantly available
Shipping until , if you place your order within the next .
Wind sensor Pro 100The compact and professional Wind sensor Pro 100 can record the current wind speed and, e.g. in the event of gusts of wind, provide information via the system control for retracting an awning or raising roller shutters or slats. The Wind sensor Pro 100 is an optimal environmental sensor for recording wind speed for weather recording.All bearings and screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations. Via the S0 interface pulses are output depending on the wind speed. One pulse is emitted per revolution. The Wind sensor Pro 100 has a pulse output and is intended for connection to the 1-Wire S0 counter module (Art. No. 11211). It is weatherproof and has an approx. 2 meter long connection cable.
A mast holder, wall bracket and mounting masts are available as accessories.
Application
Protection of awnings, roller shutters and slats from gusts of wind
Recording the wind speed for weather data acquisition
Assembly
Mounting via M6 screw connection
Wall or pole mount bracket
Measuring range
0 - 40m/s (0 - 160 Km/s)
Interface
S0 interface (reed contact, normally open contact)
1 pulses per revolution
1 pulse corresponds to 0.5m/s
Electr. values
max. 30V, max. 20mA
Connection / Cable
approx. 2m cable
Evaluation
Pulse output for 1-Wire S0 counter 11211
Dimensions
approx. 210 mm x 80mm (height x width)Wind turbine Ø 160 mm
Accessories
Pole mount, wall bracket
Scope of delivery
Wind sensor without mounting bracket
From
€79.11*
Product number: 20010
Currently not available, please sign up to get notified