MSP202 Multisensor Pro 19" mounting, temperature, relative humidity

Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10. The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation Supply voltage 9-30VDC, 0.5A max, Output 1-Wire Interface GND, Data, +5V max. 0.2A Dimensions 32 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

The ESERA-Station 200 is the heart of your smart building application and offers extensive possibilities for IoT and many automation solutions. With its integrated professional 1-Wire interface, it is ideal for controlling and monitoring a wide range of systems. Easy control via tablet or smartphone With the ESERA-Station 200, you can conveniently control your heating, lighting or shutters via your tablet or smartphone. You can also send a wide range of sensor data securely to the cloud, giving you a comprehensive overview of your building automation. An open platform for individual applications The Station 200 is more than just a conventional central control unit. It is an open platform based on industrial standards and supports a wide range of software packages. Thanks to the combination of the embedded computer (Raspberry Pi) and professional ESERA components, it offers maximum flexibility for your individual requirements. It can be easily operated with software such as Codesys, IP-Symcon, OpenHAB, FHEM, NodeRed and many others that are based on a Raspberry Pi. Expandability and adaptability The Station 200 has an internal expansion slot for additional modules, e.g. S0 counter, analog input / output. An RS485 interface with electrical insulation is also available as an option. Further additional modules are currently being planned Versatile application possibilities Various operating systems and corresponding application software can be installed on the powerful embedded computer. As standard software, we offer the ESERA-Station 200 with the smart home and automation software IP-Symcon. This central control unit offers you the flexibility to adapt your automation solution entirely to your needs and is therefore a future-proof investment in your smart building. You can combine the following systems with the ESERA Station 200: The systems listed are examples and depend on the application software and hardware extensions installed. We do not provide a functional guarantee for the specified interfaces and functions: 1-Wire bus via internal ECO controller EnOcean* KNX* (IP-Symcon, Codesys**) HomeMatic* digitalSTROM* (IP-Symcon) XBee/Zigbee* LCN* (IP-Symcon) xComfort* DMX Lighting technology*** (IP-Symcon) Z-Wave* ModBus TCP/RTU***, Slave / Master (IP-Symcon, Codesys**) Voice control from Amazon (Alexa)* M-Bus* (IP-Symcon) SPS Siemens* / WAGO* / Beckhoff* (IP-Symcon, Codesys**) PROFINET Controller / Device (Codesys**) EtherCAT Master (Codesys**) CANopen Master / Slave (Codesys**) EtherNet/IP Scanner / Adapter (Codesys**)  Explanations: * An additional gateway is required for operation. This is not included in the scope of delivery. ** The CODESYS Runtime offered is intended for testing and teaching purposes. No commercial use. For this, the CODESYS Control for Raspberry Pi MC SL must be used. We are happy to offer you this license. *** The optional RS485 interface is required for operation. The RS485 interface can be ordered together with the Station 200.

1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy 6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it. Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.