Presence detector Presence sensor Motion detector UP 12V

Quantity Unit price
1 to 49
50 to 99
From 100

Currently not available, please sign up to get notified

Product number: 20006
Product information "Presence detector Presence sensor Motion detector UP 12V"

Presence detector / Presence sensor  / Motion detector for flush mounting in ceilings and walls
12V version
Sensor for living areas, cars or small solar island systems

Motion and presence detector for indoor applications for automatic control and switching of heating and lighting.
The special feature of this presence sensor is that it is operated with low voltage and therefore cannot cause electric shocks.

Sensitivity adjustable to brightness and duty cycle.
The sensor can be ideally used with our 1-Wire Digital Input Modules.

Measuring method:

PIR sensor, reacts to heat change


12V output if active

Max. Load:

50W inductive, 100W ohmic

Power supply:

12V DC (+/-10%)


5 Lux-500 Lux

Time delay:


Angle sensor:

140° cone angle


87 x 87 x 34 mm (WxHxD)

Installation depth:


Hole opening:

75mm diameter

Scope of delivery:

Sensor, operating instructions

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials


1-Wire 8-fold digital input 10-30V
Application With the 8-fold digital input module the status of 8 switches, reed contacts or all kinds of digital sensors can be queried.The status of the switch inputs is displayed via the LED indicators on the front panel.When the input voltage is present, the respective LED indicator lights up.AdvantageYou can acquire 8 digital signals via one moduleVia manual keys you can simulate an input status without the input being connected. This is very helpful during commissioning or maintenance.Per ESERA extended Plug and Play system, called "Auto-E-Connect", the 8-fold digital input EDIN 800 is installed fully automatic in ECO Controller easy and fast.Features Interference resistant: To further protect the inputs against interference, the module has filters with a delay of only 30ms.Storage: Even short changes of the input signals are stored. So no signal or pulse can be lost between the reading cycle.Manual function: Each input can be set manually by push button for test purposes, maintenance or development.Isolation : The inputs are isolated from the 1-Wire network by optocouplers. This allows very long connection cables between the module and the sensors without interfering with the 1-Wire bus. In addition, the isolation between switch inputs and 1-Wire network provides increased safety.For the operation of the module we recommend the use of one of our 1-Wire Hub modules.Number of inputs8Input voltageLow: 0-5V High: 10-30VDC, (common negative)Input currentmax. 5mA per channel at 24VDC1-Wire Plug and Play System,Auto-E-Connect FeaturePre Configuration: Wish OWD storage Automatic Positioning: OWD enhanced Plug And Play Sensorfinder Function: LED display for sensor detection Classes Assignment: OWD class via ECO ControllerBus Interface1-Wire Industrial Bus with ESERA Auto-E-Connect System, Level I - III 5V, Data In, Data Out, Ground/GND and Ground (Earth, Functional Ground)Data interfaceIndustrial 1-Wire Bus (12V, Data and Ground), DS2808 command setLED indicators10 LEDs (Power LED, Status LED, 8 x Input) Input LED lights up at status high of the 1-Wire DS2408 interfaceIsolationmin. 500VAC against 1-Wire busOperating voltage12VDC, max. 40mA, all inputs activePower consumptionmax. 0.5W, all inputs activeConnectionscrew terminals (up to 2,5qmm cable cross section)Dimensions32 x 90 x 70mm (WxHxD), 2TE top hat rail housingInstallationIntended for switch cabinet installation (top-hat rail)HousingABS plastic with high percentage of used plasticGreen(RAL 6020)Temperature, operation-10°C to +50°CHumidity, operation10-92%, non-condensingScope of deliveryDevice and quick guide, operating instructions as download

From €80.91*

Product number: 11216

Currently not available, please sign up to get notified