Embedded 1-Wire Controller / Gateway ECB-100

Quantity Unit price
1 to 49
€74.90*
50 to 99
€71.16*
From 100
€67.41*

Currently not available, please sign up to get notified

Product number: 41101
EAN: 0098931698953
Manufacturer product ID: 41101
Product information "Embedded 1-Wire Controller / Gateway ECB-100"

Intelligent and fully automatic 1-Wire interface for your system
The Embedded 1-Wire Controller ECB-100 represents a fully automatic and extremely powerful 1-Wire interface for embedded applications within a system. No knowledge of 1-Wire technology is necessary. The ECB-100 handles all communication for the 1-Wire bus.
The 1-Wire Controller ECB-100 enables the integration of 1-Wire sensors, actuators and chips without special knowledge to all industrial control systems via Modbus and ASCII text protocol.

The 1-Wire Controller ECB-100 manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. 1-Wire Controller ECB-100 has extensive configuration and formatting options.
Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic is limited to approx. 5-8 temperature sensors depending on the system). The 1-Wire Controller ECB-100 is designed for operation for all network sizes.

Application
  • Autonomous subsystem with many automatic functions
  • Independent administration of 1-Wire network
  • Modbus and standard ASCII protocol
Data interface
  • UART (RX, TX), Serial
  • Modbus RTU and ASCII text protocol according to ESERA specification
Number of 1-Wire and iButton devices
30 pieces
Supported Chips

DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and
DS2450 and all ESERA sensors and actuators

Supply voltage 5VDC, max. 0.1A
Output 1-Wire Interface GND, Data, +5V
Dimensions 42 x 32 x 8mm (WxHxD)
Temperature range -40° to +85°C
Protection type / protection class III, IP00
Assembly Designed for integration into control systems or IoT applications
Scope of delivery Module (without power supply unit) and operating instructions
Data interface:
  • Modbus RTU and ASCII text protocol according to ESERA specification
  • UART (RX, TX), Seriell
Dimensions: 42 x 32 x 8mm (BxHxT)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP00
  • Protection class III
Mounting: Intended for integration into controllers or IoT applications
Output 1-Wire interface: GND, Data, +5V
Scope of delivery: Device and user manual
Temperature range, operation: -40°C to +85°C, Extended temperature range 2, (E2)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Note: If the device is not available, we recommend the new model, the ECO 10. Here you can find the ECO 10 controller. Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €152.91*

Product number: 11319

Currently not available, please sign up to get notified

Controller 1, 1-Wire to Serial RS232
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smarthome controllers The 1-Wire Controller 1 enables the connection of inexpensive 1-Wire sensors/modules with all types of µcontrollers, PLC or PC systems without special knowledge of the 1-Wire protocol.1-Wire Bus to Serial RS232Controller 1 is the autonomous management of 1-Wire devices in a 1-Wire network, automatically detecting new 1-Wire devices and cyclically supplying the current values. The output is formatted as ASCII characters and sent via the computer interface to the higher-level control system. For example, temperature sensors provide you with the temperature in plain text. The device has extensive configuration and formatting options, which are read and operated via terminal program (e.g. HTerm or Putty). Up to 30 1-Wire devices can be operated in parasitic and standard mode. The 1-Wire interface is designed for operation with small to large 1-Wire networks. Supported chips: DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2413, DS2408, DS2423, DS2438 and DS2450 Interface: 1-Wire to Serial RS232Supply voltage: 9-30VDCOutput: 5V max.0,2A Dimensions: 32 x 71x 90mm (WxHxD) Mounting: Designed for DIN rail Connection: Screw terminalsScope of delivery: Module and operating instructions

From €125.91*

Product number: 11320

Currently not available, please sign up to get notified

1-Wire Controller 2 Ethernet 1-Wire and I/O
1-Wire Controller 2 Ethernet, the intelligent system interface to all SmartHome and IoT controllers.Small and smart 1-Wire controller with integrated I/Os for "Smart Home" and "Internet of Things" applications. 1-Wire functions like 1-Wire Controller 1 plus extra: 4 x digital outputs (relay 8A / 230V on/off) 1 x digital output (relay 5A / 230V changer) 4 x digital inputs 10-30VDC, isolated by optocoupler Analog output 0-10VDC, isolated 5V and 12V power supply for 1-Wire bus system Free internal slot for extensions (optional) The 1-Wire Controller 2 is a combination device with direct inputs and outputs and for managing a 1-Wire network. It enables direct switching and querying of analog and digital inputs and outputs and the integration of inexpensive 1-Wire sensors and actuators. The digital inputs can be linked internally with the digital outputs. This makes it possible, for example, to switch lights or other consumers without external software.The device can be ideally connected as a subsystem for all types of µcontroller, PLC or PC systems without special knowledge of the 1-Wire protocol. It is a classic device for IoT (Internet of Things) applications. In addition to the direct inputs and outputs, the 1-Wire Controller 2 provides a 1-Wire interface for the management of 30 1-Wire devices. 1-Wire Controller 2 automatically detects new 1-Wire devices via the 1-Wire interface and cyclically supplies their current values.The communication with the 1-Wire Controller 2 is carried out via an easily readable, simple text-based protocol (ASCII characters). The device has extensive configuration and formatting options, which in the simplest case can be controlled via a terminal program (z. B. Hercules or Putty) can be read out and controlled. Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for the operation of small to large 1-Wire networks. Exits: 4 x relay output (make contact) each 8A load capacity and separate current input for 2 channels each1 x relay changeover relay, 5A load capacity and separate current input1 x 0-10V analog output, electrically isolated from the rest of the system Inputs: 4 x Digital 10-30VDC, electrically isolated from the rest of the system Options / Expansion slot: Extension possibility for e.g. S0 Input for energy meter Analog inputs for analog sensors etc. Corresponding expansion modules on request. The expansion slot is specially designed for customer-specific expansions. Data interface: UDP, TCP or VSP (Virtual Serial Port, with additional software) Protocol Data interface: Text protocol (ASCII characters) interface: 1-Wire bus for 30 devices Output 1-Wire Bus: 5V (max. 0.2A), 12V (max. 0.2A), data and ground 1-Wire bus, supported blocks: DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406,DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage: 24VDC (15 - 30VDC), max. 1A Connection: Screw terminal Dimensions: 100 x 71x 90mm (WxHxD) Assembly: Designed for top hat rail Scope of delivery: Module and operating instructions, without power supply. 24VDC power supply available as accessory

From €242.91*

Product number: 11340

Currently not available, please sign up to get notified

Related products

Power supply 12VDC 1A
Switching power supply 12V 1A, plug-in power supply AC/DC HNP12-120 Energy-saving plug-in power supply unit for supplying electronic assemblies - Power supply with European plug - wide range input 100-240VAC - short circuit and overload protection - insulation class 2 (protection class 2)- complies with Energy Star Level IVManufacturer: HN-PowerModel: HNP12Connection: Input: Euro plug, Output: Hollow plug Input: 100-- 240VAC, Output: 12V, 1A. 12W Output plug: 2.1 x 5.5 x 10 mm,inside positive, outside negative Connection: 1,5m Operating temperature: -5...+40°CEfficiency: 70%.

From €8.91*

Product number: 61051

Currently not available, please sign up to get notified