Unterschied- 1-Wire-Adapter-Buskoppler-Controller

Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10. The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation Supply voltage 9-30VDC, 0.5A max, Output 1-Wire Interface GND, Data, +5V max. 0.2A Dimensions 32 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

Door opener / Access system via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway Features: Independent access system for electric doors / door opener via iButton and RFID key (RFID via RFID to 1-Wire reader, Art. No. 11614) the 1-Wire Controller / 1-Wire Gateway takes over the control of an electric door opener when an RFID or iButton key is contacted or brought into the area of the RFID reader. Additionally, an additional feedback output for an LED display can be controlled. Internal relays of the 1-Wire Controller 2 or any 1-Wire module in the 1-Wire network can be used as control output Door open time can be set in a wide range (1 - 65000 seconds) Additional display output for feedback via LED displays Electrical devices can also be activated for a time up to 65000 seconds incl. iButton / RFID Fast Mode function extension NO superordinate software / control system is required for the door opener function max. 30 keys can be used. If further 1-Wire devices are controlled, correspondingly fewer keys Application: With this function extension for 1-Wire controller / 1-Wire gateway, a door opener function or access system can be implemented via iButton Release of electrical devices for a certain time, e.g. for TV, beamer or game consoles (child safety lock)

The EC 1 central unit is designed for the autonomous management of a 1-Wire network. The user does not have to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators). The central processing unit evaluates the sensor and actuator data internally and outputs it cyclically (1-2 sec.) in plain text once converted (e.g. for temperature sensors in C°). In addition, the article number for ESERA modules can be entered; the calculation and output are adapted to the function of the module A wide range of sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm contacts, glass breakage and smoke detectors The 1-Wire interface of the sensor gateway of the EC 1 central unit is designed so that both small and large 1-Wire networks with long cable runs can be set up safely. The 1-Wire sensors can be operated simultaneously in mixed parasitic* or normal mode. The currently most powerful 1-Wire interface for maximum data security has also been installed for complex network structures. The EC 1 Smart Home sensor gateway has a wide-range input of 9 - 30VDC for the power supply. It is therefore equally suitable for 12VDC and the industry-typical 24VDC supply voltages. Accessories such as top-hat rails and plug-in power supply units: see homepage. HIGHLIGTHS Low-cost entry-level module with functionalities of the professional ECO gateway central units Intuitive operation via web server functionality Data interface for Modbus/TCP, MQTT and ASCII LAN interface for data, configuration, debug and firmware updates ESERA-patented Auto-E-Connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming. Customizations and branding possible

The EC 2 central processing unit is designed for demanding applications for autonomous management of a 1-Wire network. You no longer need to worry about 1-Wire commands or formulas for evaluating the sensor data. The gateway independently scans the 1-Wire network for devices (sensors and actuators). The EC 2 Sensor Gateway outputs the sensor and actuator data ready prepared cyclically, e.g. for temperature sensors in C°. For scaling, it is only necessary to divide by 100. The article number for ESERA modules can also be entered; the calculation and output are adapted to the function of the module The 1-Wire interface of the EC 2 Sensor Gateway is specially designed to safely operate even large 1-Wire networks with long cable runs. Mixed 1-Wire sensors can be operated simultaneously in parasitic or normal mode. The most powerful 1-Wire interface currently available has been installed for maximum data security, even for complex network structures. DATA LOGGER (OPTIONAL): If the data connection to the host system is interrupted, no measured values are lost. The EC2 central unit contains a data logger for storing the sensor data. The current time is also saved to ensure that the data is saved at the correct time The EC 2 central unit has a wide-range input of 15 - 30VDC for the power supply and is equally suitable for smart home and typical industrial 24VDC supplies. You can find suitable DIN rail power supplies in our webshop HIGHLIGTHS Intelligent interface to many smart home devices and software solutions; expandable via ESERA 1-wire-hub, therefore also suitable for large networks Optional: data logging in case of communication interruption to the host systemData interface for Modbus/TCP, MQTT and ASCIILAN interface for data, configuration, debug and firmware updates Digital inputs/outputs with additional push-button interface, analog output ESERA-patented Auo-e-connect plug-and-play system: fast and fully automatic reading of manufacturer-independent 1-wire devices Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without programming. Customizations and branding possible

The ECO 110 Pro central unit, Smart Building is a powerful sensor interface of the latest generation for many smart home and smart building software applications. The gateway has an access point and web server. Up to 30 sensors can be connected to the ECO 110 Pro fully automatically via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. A wide range of measuring sensors is available, e.g. for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), as well as glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN and via the access point (activation at the touch of a button). This system was developed as a low-maintenance, industry-standard device, without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for MQTT and ASCII Low-maintenance device in industrial quality, with extensive device protection, suitable for extended temperature range from -5°C to +50°C Native programming, without Linux and without unknown libraries Applications Smart Home and Smart Building: for modern building automation Sensor interface for many smart home software applications: IP-Symcon, IO-Broker, Home Assistant, openHAB and more Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Secure Boot SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without teach-in

The 3rd generation of the ECO 120 Pro Industrial 1-Wire Gateway is an ESERA further development of the 1-Wire high-performance sensor interface. It is optimized for operation on your desk as a programming interface or in the laboratory as an innovative measuring system. Up to 30 sensors can be connected to the ECO 120 PRO fully automatically via the Industrial 1-Wire bus and the Auto-E-Connect Plug and Play system. The ESERA Auto-E-Connect system is an extension of the 1-Wire bus standard and has been registered as a German and European patent by ESERA GmbH. A wide range of sensors can be connected via the 1-Wire bus interface: e.g. for temperature, humidity, dew point, air quality (VOC or fine dust), gases (e.g. CO2 or CO) or alarm signaling contacts. Thanks to the Auto-E-Connect support, product data can be read out from all sensors in real time. Each sensor can provide up to 5 data values. This means that the ECO 120 PRO can provide a maximum of 150 sensor data to your control system or PLC. The ESERA Config Tool and the ECO-Dashboard 100 provide you with extensive software support. To ensure continuous and reliable operation in an industrial environment, the ECO 120 PRO is powered by a 12V plug-in power supply unit. HIGHLIGHTS Auto-E-Connect Level I to III: fully automatic plug-and-play system for up to 30 sensors, Fast readout of all devices in a 2 second cycle USB 2.0 interface for data, configuration, debug and firmware updates Convenient desktop device on rubber feet, with power supply via plug-in power supply unit Robust industrial design with extensive bus and device protection, Suitable for extended temperature range from -5° to 50°C Optional equipment Ultrafast iButton or RFID read function for access or security authentication Coated electronics (conformal coating) for high operational reliability under permanently high or strongly fluctuating humidity conditions Data logger function for long-term measured value recording or logging

The ECO 1206 Pro central unit supports secure data transmission on platforms such as Microsoft Azure IoT or SAP IoT via the MQTT SSL protocol standard*. The gateway fulfils the highest demands in mechanical and plant engineering. The gateway has an access point and web server. Up to 30 sensors can be connected to the ECO 1206 fully automatically via the Industrial 1-Wire bus using the Auto-E-Connect Plug and Play system. The ECO 1206 central unit offers a convenient web interface for device configuration and software updates. In addition, production data from all connected sensors can be read out via the WLAN interface. The device has protected antennas inside the housing for this interface. In addition to the sensor bus interface, the device also has digital inputs and outputs, e.g. for alarm signalling devices. The ECO 1206 makes the sensor and production data of the connected sensors conveniently available via a web server. The web server can be accessed via WLAN and access point (activation at the touch of a button). This system is a low-maintenance industrial device as no Linux is used. The gateway has been programmed natively over many years without the use of unknown libraries. Extensive software support is available free of charge * Subject to an NDA (Non-Disclosure Agreement) and on a project basis. HIGHLIGHTS Versatile connectivity: LoRaWAN connection (868 MHz) or NB-IoT LPWAN, Modbus/TCP (WLAN) User-friendly OLED display, intuitive operation via web server and WLAN access point for data, configuration, debug and firmware updates Native programming, without Linux and without unknown libraries 6x digital inputs, 1x digital output Simple installation and commissioning with fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors (e.g. temperature, humidity, air quality, gas sensors) Robust and low-maintenance industrial versions (IP65) with indoor monitoring system and extensive device protection, suitable for extended temperature range from -5°C to 50°C Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Lacquered electronics (conformal coating) for high operational reliability under permanently high or strongly fluctuating humidity conditions Customised adaptations and branding possible

The ECO 160 Pro central unit, the smart building multi-zone sensor gateway, offers an integrated 1-wire switch for up to three separate 1-wire buses*. It is the central 1-Wire interface in your home and is characterized by its extreme flexibility and powerful sensor and actuator interface of the latest generation. The central unit integrates seamlessly into numerous smart home and smart building software applications. Cost and time savings thanks to quick installation and commissioning: Connect, switch on and receive measured values. This gateway is equipped with an access point and a web server. Up to 30 sensors can be connected to the ECO 160 using the Auto-E-Connect plug-and-play system. Flexibly divided into up to 3 separate 1-bus zones*. A wide range of measuring sensors are available, including temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), as well as glass breakage and smoke detectors. All 1-wire sensors and actuators are read out in a 5-second cycle. The configuration, software updates and sensor production data are conveniently provided via the web server. The intuitive operation of the web server is accessible via LAN and the access point. Designed as a low-maintenance device according to industry standards, this system was implemented without Linux and with its own native programming. Unknown libraries are not used to ensure stability and reliability. The LAN interface enables 2 data connections via MQTT and the ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors, can be divided into up to 3 separate bus zones using an integrated 1-wire switch Web server and access point for data, configuration, debug and firmware updates Data interface for MQTT, Modbus/TCP and ASCIINatively programmed, without Linux and without unknown libraries Low-maintenance device in industrial quality, with extensive device protection, suitable for extended temperature range from -5°C to +50°C Applications Smart Home and Smart Building: universal sensor and actuator interface for modern building automation Sensor-actuator interface for various multimedia and smart home software applications: Crestron, IP-Symcon, IO-Broker, Home Assistant, openHAB, NodeRed and many more Up to 30 sensors can be connected via Plug and Play Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Secure Boot SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and iButton read without learning *1-Wire zones 1 and 2 are currently activated in the scope of delivery. Activation of the 3rd zone requires the purchase of a paid license, which is conveniently available via our webshop. The license can then be imported directly into the gateway online."

The ECO 304 eBus Gateway is a powerful interface of the latest generation between your heating system and the ebusd* software, which you can use to read and write to your heating system, regardless of the manufacturer, and thus carry out optimizations. The gateway has been optimized for communication with the "ebusd "* software. The enhanced command set (Enhanced Mode) of ebusd* is supported. In addition to the eBus functions, the eBus gateway also has an access point and web server for simple operation and configuration. The LAN interface can be used to communicate with up to 2 data connections via ASCII text protocol. The ECO 304 is a new eBus coupler with a standard 2400 baud data interface, plus an "Enhanced Mode" extension. The gateway performs a fully automatic level adjustment on your eBus in just a few seconds. A cumbersome, manual adjustment is no longer necessary. The ECO 304 does not carry out any data analysis or evaluation itself. The device settings can be conveniently changed, software updates carried out and device data viewed via the web server. The web server can be accessed via LAN and via AccessPoint (activation at the touch of a button). This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. Extensive software support is available via ebusd** on the web. We provide the eConfig-Tool software free of charge for debugging and configuration. The ECO 304 is not supported by the Vaillant vrDIALOG software. * depending on the software, programming and control ** ebusd is not software from ESERA GmbH. We assume no liability whatsoever with regard to functional reliability and no support for this software HIGHLIGTHS Optimized gateway solution for ebusd**, supports reading and writing via the eBus interface of your heating system. Manufacturer-independent plug-and-play system with automatic eBus level adjustment for easy integration. Integrated web server and access point for uncomplicated configuration, debugging and firmware updates Low-maintenance and reliable thanks to native programming without the use of Linux or unknown libraries. Robust industrial design with extensive protective circuits for increased device protection, including simple mounting on a top-hat rail (2TE, 32mm). Up to 25% reduction in heating costs and increased living comfort Equipment options Customization and branding possible, please contact us at info@esera.de Application examples  "Home Assistant" (link: https://github.com/john30/ebusd/wiki) Home-Assistant "FHEM" (link: http://www.fhemwiki.de/wiki/EBUS#Software)  FHEM IP-Symcon ebusd module: (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ ) IPS ebus VMMon from Alexey Ozerov (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ )  VWMon

The ECO 305 eBus Gateway is a powerful interface of the latest generation between your heating system and the ebusd* software, which you can use to read and write to your heating system, regardless of the manufacturer, and thus carry out optimizations. The gateway has been optimized for communication with the "ebusd "* software. The enhanced command set (Enhanced Mode) of ebusd* is supported. In addition to the eBus functions, the eBus gateway also has an access point and web server for simple operation and configuration. The LAN interface can be used to communicate with up to 2 data connections via ASCII text protocol. The ECO 305 is a new eBus coupler with a standard 2400 baud data interface, plus an "Enhanced Mode" extension. The gateway performs a fully automatic level adjustment on your eBus in just a few seconds. A cumbersome, manual adjustment is no longer necessary. The ECO 305 does not carry out any data analysis or evaluation itself. The device settings can be conveniently changed, software updates carried out and device data viewed via the web server. The web server can be accessed via LAN and via AccessPoint (activation at the touch of a button). This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. Extensive software support is available via ebusd** on the web. We provide the eConfig-Tool software free of charge for debugging and configuration. The ECO 305 is not supported by the Vaillant vrDIALOG software. * depending on the software, programming and control ** ebusd is not software from ESERA GmbH. We assume no liability whatsoever with regard to functional reliability and no support for this software HIGHLIGTHS Optimized gateway solution for ebusd**, supports reading and writing via the eBus interface of your heating system. Manufacturer-independent plug-and-play system with automatic eBus level adjustment for easy integration. Integrated web server and access point for uncomplicated configuration, debugging and firmware updates Low-maintenance and reliable thanks to native programming without the use of Linux or unknown libraries. Robust industrial design with extensive protective circuits for increased device protection, including simple mounting on a top-hat rail (4TE, 77mm). Up to 25% reduction in heating costs and increased living comfort Equipment options Customization and branding possible, please contact us at info@esera.de Application examples  "Home Assistant" (link: https://github.com/john30/ebusd/wiki) Home-Assistant "FHEM" (link: http://www.fhemwiki.de/wiki/EBUS#Software)  FHEM IP-Symcon ebusd module: (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ ) IPS ebus VMMon from Alexey Ozerov (link: https://baublog.ozerov.de/waermepumpe/vwmon-datenlogger-fuer-die-vaillant-waermepumpe/ )  VWMon